ProClip 216134 Zebra TC5x Cradle for Trigger Handle User Guide

June 4, 2024
ProClip

Item No. 216134 – Holder
User GuideProClip 216134 Zebra TC5x Cradle for Trigger
Handle

Compatible with:
Zebra TC51/52/56/57 in Rugged Boot with Trigger Handle

Important:

Self-installation instructions and advice are provided for your convenience. It is your responsibility to determine if you have the knowledge, skills, and physical ability required to properly perform an installation. ProClip USA, LLC. shall have no liability for damage or injury resulting from the installation or use of any ProClip or third-party products. It is your responsibility to ensure that all products are installed in adherence to local laws and regulations and in such a manner as to allow a vehicle to be operated safely and without distraction. ProClip USA, LLC. product warranties do not cover the installation, removal, or re-installation of any product.
Attention: Carefully read all instructions and review the images before installing this product.

  1. Rear Facing Screen: This holder is designed to keep the screen facing away from the operator when docked and supports the device with the pistol grip. This product includes a tilt-swivel that is loose in the packaging. This can be used to attach to the back or the bottom of the holder.ProClip 216134 Zebra TC5x Cradle for Trigger Handle - Rear Facing Screen
  2. Optional Tilt-Swivel: The holder and Tilt-Swivel both feature the AMPS hole pattern that is common in a ball, pedestal, pipe, cart, and vehicle mounts. The included self-tapping screws can be used to attach the tilt-swivel to the bottom or the back of the holder to change the docking angle up to 15 degrees in any direction.ProClip 216134 Zebra TC5x Cradle for Trigger Handle - Optional Tilt Swivel
  3. Mounted to the back: Using the included M4 fastener pack, the holder can be attached to any compatible mounting platform. Use the included lock nuts and select the appropriate length fastener to go through the backplate of the holder and the mount then attach using the included lock nuts.ProClip 216134 Zebra TC5x Cradle for Trigger Handle - Mounted to the back
  4. Mounted to the bottom: Using the included M4 fastener pack, the holder can be attached to any compatible mounting platform. Use the included lock nuts and select the appropriate length fastener to go through the backplate of the holder and the mount then attach using the included lock nuts.ProClip 216134 Zebra TC5x Cradle for Trigger Handle - Mounted to the bottom

Returns
All returns must be made within thirty (30) days of the delivery date and include proof of purchase, a copy of your original order, or an invoice. No products shipped hereunder may be returned without ProClip USA’s prior approval. In order to return a product, the buyer must obtain an RMA number (Return Merchandise Authorization Number). Items returned without a valid RMA number may be rejected. Items that are open, used, damaged, or returned without all original components may have a restocking fee applied.

Limited Warranty and Liabilities

ProClip warrants that the Products will be free of defects in materials and workmanship for a period of one (1) year from the date of purchase. If any Product should become defective within the warranty period, ProClip, at its option, will replace it, repair it or refund the purchase price. Repair or replacement parts or Products will be furnished on an exchange basis and will either be new or reconditioned. All replaced Products shall become the property of ProClip. Warranty service is available to you by delivering the Product during the warranty period to the company it was purchased from or to ProClip at 4915 Voges Rd., Madison, WI 53718 USA and providing proof of purchase, price, and date. If shipped to ProClip, the buyer must first call ProClip at +1 800-296-3212 or e-mail ProClip at returns@proclipusa.com to obtain a return approval and return number. You will bear all shipping, packaging, and insurance costs and all other costs, excluding labor and parts, necessary to effectuate repair, replacement, or refund under this warranty. For more information on how to obtain warranty service, write an e-mail, or telephone ProClip at 4915 Voges Rd., Madison, WI 53718 USA.Tel: +1 800-296-3212, e-mail: returns@proclipusa.com.
THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY PRODUCT WHICH HAS BEEN DAMAGED AS A RESULT OF ACCIDENT, MISUSE, ABUSE, OR AS A RESULT OF UNAUTHORIZED SERVICE. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES FOR THIS PRODUCT. IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT SHALL HAVE NO GREATER DURATION THAN 1 YEAR FROM THE DATE OF PURCHASE. IN THE EVENT THIS PRODUCT BECOMES DEFECTIVE DURING THE WARRANTY PERIOD, THE PURCHASER’S EXCLUSIVE REMEDY SHALL BE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED ABOVE. IN NO EVENT SHALL PRO CLIP BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION LOSS OF PROPERTY, ARISING FROM BREACH OF ANY EXPRESSED OR IMPLIED WARRANTY. PROCLIP DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOSE SET FORTH ABOVE. IN NO EVENT WILL PRO CLIP BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, INDIRECT, SPECIAL, PUNITIVE, OR EXEMPLARY DAMAGES, INCLUDING ATTORNEY FEES ARISING OUT OF THE USE OF OR THE INABILITY TO USE THE PRODUCTS, OR FOR ANY CLAIM BY ANY OTHER PARTY, EVEN IF PRO CLIP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Regulatory information:www.proclipusa.com/regulatory.html

ProClip USA, LLC
4915 Voges Road
Madison, WI 53718
USA Office: +1 608-807-5320
Fax: +1 920-372-0066
Toll-free: 800-296-3212
Internet: www.proclipusa.com

Documents / Resources

| ProClip 216134 Zebra TC5x Cradle for Trigger Handle [pdf] User Guide
216134, Zebra TC5x Cradle for Trigger Handle, Zebra TC5x Cradle, TC5x Cradle, 216134, Cradle
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals