ProClip 739195 Holder with Key Lock Installation Guide
- June 4, 2024
- ProClip
Table of Contents
ProClip 739195 Holder with Key Lock Installation Guide
Important:
Self-installation instructions and advice are provided for your
convenience. It is your responsibility to determine if you have the knowledge,
skills, and physical ability required to properly perform an installation.
ProClip USA, Inc. shall have no liability for damage or injury resulting from
the installation or use of any ProClip or third party products. It is your
responsibility to ensure that all products are installed in adherence with
local laws and regulations and in such a manner as to allow a vehicle to be
operated safely and without distraction. ProClip USA, Inc. product warranties
do not cover the installation, removal or re-installation of any product.
Attention:
Carefully read all instructions and review the images before installing this
product.
Mounting the Holder
The holder has AMPS and VESA 75/100 hole patterns and can fit a wide range of
pedestals, monitors and other mounts.
Place the holder over the matching holes in the back plate of the holder.
Attach the holder using the included fasteners.
Docking the Tablet
Place the lower part of the tablet in the cradle, then press the upper part
forwards so it snaps into place in the holder. The top lip of the holder will
slide over the top of the tablet and hold the tablet in place.
Press the lock down over the top lip of the tablet. Depress the center pin to
lock the tablet into place.
Undocking the Tablet
Using the key, turn the lock until the center pin pops out. Slide the lock up
past the top lip of the tablet.
Using a thumb, press up on the top lip of the holder and then pull forward on
the top of the tablet.
Once clear of the top lip, lift up on the tablet to remove from the holder.
Installation Complete
The holder is now in place. This holder has open sides that accommodate the
included hand straps for the ET51 8.4″ with Integrated 1D/2D Barcode Scanner.
Returns
All returns must be made within thirty (30) days of the delivery date and include proof of purchase, a copy of your original order, or invoice. No products shipped hereunder may be returned without ProClip USA’s prior approval. In order to return a product, the buyer must obtain an RMA number (Return Merchandise Authorization Number). Items returned without a valid RMA number may be rejected. Items that are open, used, damaged, or returned without all original components may have a restocking fee applied.
Limited Warranty and Liabilities
ProClip warrants that the Products will be free of defects in materials and
workmanship for a period of one (1) year from the date of purchase. If any
Product should become defective within the warranty period, ProClip, at its
option, will replace it, repair it or refund the purchase price. Repair or
replacement parts or Products will be furnished on an exchange basis and will
either be new or reconditioned. All replaced Products shall become the
property of ProClip. Warranty service is available to you by delivering the
Product during the warranty period to the company it was purchased from or to
ProClip at 4915 Voges Rd., Madison, WI 53718 USA and providing proof of
purchase, price and date. If shipped to ProClip, the buyer must first call
ProClip at +1 800-296 3212 or e-mail ProClip at
returns@proclipusa.com to obtain a return
approval and return number. You will bear all shipping, packaging and
insurance costs and all other costs, excluding labor and parts, necessary to
effectuate repair, replacement or refund under this warranty. For more
information on how to obtain warranty service,write, e-mail or telephone
ProClip at 4915 Voges Rd., Madison, WI 53718 USA.Tel: +1
800-296-3212,
e-mail: returns@proclipusa.com.
THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY PRODUCT WHICH HAS BEEN DAMAGED AS A RESULT OF ACCIDENT, MISUSE, ABUSE OR AS A RESULT OF UNAUTHORIZED SERVICE. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES FOR THIS PRODUCT. IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT SHALL HAVE NO GREATER DURATION THAN 1 YEAR FROM THE DATE OF PURCHASE. IN THE EVENT THIS PRODUCT BECOMES DEFECTIVE DURING THE WARRANTY PERIOD, THE PURCHASER’S EXCLUSIVE REMEDY SHALL BE REPAIR, REPLACEMENT OR REFUND AS PROVIDED ABOVE. IN NO EVENT SHALL PROCLIP BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION LOSS OF PROPERTY, ARISING FROM BREACH OF ANY EXPRESSED OR IMPLIED WARRANTY. PROCLIP DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOSE SET FORTH ABOVE. IN NO EVENT WILL PROCLIP BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, INDIRECT, SPECIAL, PUNITIVE, OR EXEMPLARY DAMAGES, INCLUDING ATTORNEY FEES ARISING OUT OF THE USE OF OR THE INABILITY TO USE THE PRODUCTS, OR FOR ANY CLAIM BY ANY OTHER PARTY, EVEN IF PROCLIP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Regulatory information: www.proclipusa.com/regulatory.html
Support
ProClip USA, LLC
4915 Voges Road
Madison, WI 53718 USA
Office: +1 608-807-5320
Fax: +1 920-372-0066
Toll free: 800-296-3212
Internet: www.proclipusa.com
References
- usa.tel
- Custom Car Phone Holders & Dashboard Mounts for Phones | ProClip USA
- Regulatory Information | ProClip USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>