FORTIN 2024 Toyota Corolla Push to Start Installation Guide

FORTIN 2024 Toyota Corolla Push to Start

INSTALLATION GUIDE

ADDENDUM – SUGGESTED WIRING CONFIGURATION

This guide may change without notice. See www.fortin.ca for latest version

DESCRIPTION

WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

KEY BYPASS PROGRAMMING PROCEDURE 2/2 |

REMOTE STARTER PROGRAMMING PROCEDURE

REMOTE STARTER FUNCTIONALITY

Notice: Updated Firmware and Installation Guides

Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING

The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2019 , FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

Specifications:

• Model: EVO-ONE
• Manufacturer: FORTIN.CA
• Compatible Vehicles: TOYOTA Corolla
• Year: 2019 and later
• Compatible Module: QR CODE ON THE LABEL
• Firmware Version: 88.[22] or higher

Product Usage Instructions:

Program Bypass Option:

To program the bypass option, follow these steps:

1. Use the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately).
2. Select UNIT OPTION C1.
3. Set FUNCTION D2 to the desired setting for Hood trigger output status.

Program Remote Starter Option:

To program the remote starter option for R.S. OEM REMOTE STAND ALONE, follow these steps:

1. Select FUNCTION 32 for mode 3 or FUNCTION 38 for mode 2.
2. Ensure the parts required, like a 5 Amp Fuse, are available (not included).

Mandatory Installation:

Ensure the HOOD PIN CONTACT DE CAPOT is installed for proper functioning. Set FUNCTION A11 to OFF if remote starting with the hood open.

Wiring Connection:

Refer to the wiring guide provided for connecting various components like Yellow, Purple, Green, Orange wires, etc.

Additional Notes:

• For vehicles equipped with a TPMS, connect as required for remote start control from OEM remotes.
• Cut loop for automatic transmission mode if needed.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE

www.fortinbypass.com

FAQ:

Q: Can I install the module myself?

A: This module must be installed by a qualified technician to avoid damage to the vehicle.

Q: What should I do if I encounter errors during installation?

A: Any errors in connections can cause permanent damage. Seek professional help if unsure.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>