Eastbrook 40.0041 Round frosted LED Vanity Mirror Installation Guide

September 4, 2024
Eastbrook

Eastbrook 40.0041 Round frosted LED Vanity Mirror

Makeup Mirror

  • The size of the makeup LED mirror is 8inch
  • The swing arm can be extended and shortened, we can adjust the direction optionally
  • Copper-free silver mirror, one side 5X magnifier
  • Rocker switch
  • The material is copper

Note: This is the working instruction applied to the Rocker switch make- up LED mirror

Required tools

Note: Please carefully read the following before installing

  1. Before installing the product, please carefully read the instructions and operate accordingly;
  2. Before installing, please turn off the main power switch and ensure that it won’t turn on;
  3. The installation of this product requires that the staff has some electrical knowledge;
  4. Before installing, please check whether the product is broken, to avoid injury caused by damaged glass;
  5. Do not clean the product surface with acid and alkaline cleaning agents; please use a damp cloth.

Installation Steps

  1. Fixing the wall bracket
    • Open the product packaging, and check whether the product has any exception or functional damage; if yes, please return it to the dealer.
    • After selecting the location of the Makeup mirror, check whether the wall is solid, Make sure there is enough space in the installation location (Fig. 1). measure the distance of the holes (84.5mm) in the wall bracket with a tape measure and mark it on the wall with a pencil (Fig. 2).
    • Drill holes in the marked position with an electric drill and a 06 drill bit, and use sp special ceramic drill if the wall surface is ceramic tile.
    • Knock the expansion plugs into the holes in the wall with a hammer, and then tighten the screws with a screwdriver to fix the bar, and c calibrate the level with a spirit level (Fig. 3).
  2. Make-up mirror location installation:
    • Disconnect power, and connect the wire to the terminal block. See (Fig.4)
    • Covered the chassis and screw, see (Fig.5)
    • Finally, turn on and test the product(Fig.6).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals