Eastbrook GL4 3DB Bathroom Cabinets Instruction Manual
- May 15, 2024
- Eastbrook
Table of Contents
INSTALLATION MANUAL
Mounting
Wall Hung Cabinet Mounting
Locate the furniture in your bathroom, see figure 1 & 2.
To locate the cabinet unit position onto the wall.
Suggestion install height:850mm860mm from the basin top to the floor.
Make sure the mounting matel plates inside the side panels of the cabinet.
Locate the hangers onto the wall mounting plates.
Wall hangers not only tighten the unit against the wall (Screw A) but also
offer up/down adjustment to fine-tune the fixing position (Screw B).
Free Standing Cabinet Mounting
Locate the furniture in your bathroom, see figure 3 & 4. Locate the furniture
position in your bathroom. Set the furniture on the position.
Hinge Adjustment
Hinges may require adjustment for correct door alignment.
This is achieved with the adjustable soft close hinges using the adjustment
screws A and B (see figure5)
To make adjustment 1, tighten/loosen screw A;
To make adjustment 2, simply turn screw B. (see figure6)
Basin Fitting
When fitting the basin to this unit, you are required to apply an adequate
sealing compound between the basin and unit to prevent potential water
damage.
Product Maintenance
To maintain the surface finish of your product, please ensure:
a. The room is well ventilated.
b. Excess water which may sit on the surface is wiped dry.
c. Any bathroom products being used which may splash on the surface are wiped
clean.
d. Any soap residue is wiped clean.
e. Use only a clean damp cloth, no abrasive cleaning solutions or material can
be used on the product, as this will invalidate your guarantee
Technical Helpline: 01452 317890
Email: technical@eastbrookco.com
Eastbrook Road, Gloucester GL4 3DK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>