T238 6505 DTU V2.0 Bluetooth Version For V2 Gearbox Instruction Manual
- June 9, 2024
- T238
Table of Contents
T238 6505 DTU V2.0 Bluetooth Version For V2 Gearbox
Description
The T238 tracer unit is designed for BB/NERF dart/Gel ball blasters, it attachments to your blaster which allows your BB/NERF dart/Gel ball to glow in the dark. To see the flight path of your shot, special tracer BBs/NERF darts/Gel balls are needed. When using the RGB version, you can still see a rainbow of gunfire effects without the help of special bullets.
Main features
- Dimensions: 85mm long, 35mm outer diameter, and 14mm inner diameter
- Weight: 90g
- Interface: 19mm (with 14 CCW adapter and 19mm to 16mm adapter)
- Functions: Rainbow tracer mode, dynamic gunfire color, tracer BBs/NERF darts/Gel balls charging, adjustable gunfire color, 20-minute timeout automatic shutdown, low battery automatic shutdown
- Supported rate of fire: max. 50rps
- Supported projectile types: spherical projectile and cylindrical strip projectile with 6-14 outer diameter
- Battery: 760mah, maximum endurance 40000 rounds, charging with Micro USB cable
Charging
Screw off the shell and plug in the USB cable. The red LED lights up when charging and goes out when full.
Function
| Function | Operation | Reaction |
|---|---|---|
| Power on and enter the rainbow trajectory mode | Press once to power on and |
enter the rainbow trajectory mode and turn on bullet charging function when in the
shutdown state
| RGB LED and UV LED will blink once
Dynamic gunfire color| After entering the rainbow trajectory mode, briefly
press once to switch to the Dynamic
gunfire color mode
| RGB LED and UV LED will blink twice
Red gunfire color| After entering the Dynamic gunfire color mode, briefly
press 1 to switch to the Red
gunfire color mode
| Red LED and UV LED will blink once
Yellow gunfire color| After entering the Red gunfire| Yellow LED and UV LED
will
| color mode, briefly press once to switch to the Yellow gunfire
color mode
| blink once
---|---|---
Green gunfire color| After entering the Yellow gunfire color mode, briefly
press once to switch to the
Green gunfire color mode
| Green LED and UV LED will blink once
Cyan gunfire color| After entering the Green gunfire color mode, briefly press
once to switch to the
Cyan gunfire color mode
| Cyan LED and UV LED will blink once
Blue gunfire color| After entering the Cyan gunfire color mode, briefly press
once to switch to the
Blue gunfire color mode
| Blue LED and UV LED will blink once
Pink gunfire color| After entering the Blue gunfire color mode, briefly press
once to switch to the Pink gunfire
color mode
| Pink LED and UV LED will blink once
White gunfire color| After entering the Pink gunfire color mode, briefly press
once to switch to the White gunfire
color mode
| White LED and UV LED will blink once, briefly press once to switch to the rainbow
trajectory mode
Only enable the bullet charging function| Press and hold 2 seconds to turn off the gunfire simulation function when in the power on state, and enable the
bullets charging function
| UV LED will blink once
Only enable the gunfire simulation function| Long press 2 seconds to turn off
the bullets charging function, and enable the gunfire simulation function when
only the bullet charging
function is turned on.
| RGB LED will blink once
Power off| Long press 2 seconds to power off when only the gunfire simulation
function is turned
on.
| The white light gradually darkens until it is turned off
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>