Baseus LightChaser Car Mount 15W Wireless Charger User Manual

Baseus LightChaser Car Mount 15W Wireless Charger

Product Information

The Baseus LightChaser Wireless Charging Electric Car Mount 15W supports QI wireless charging function. It has a Type-C input of 5V 2.4A (Max.), 9V 2.23A (Max.), and 12V 1.67A (Max.). The wireless charging output is 5W/7.5W/10W/15W. It comes with an infrared induction, clamping arm, clamp feet, and tail hook. The product model number is BS-CM020.

Product Usage Instructions

1. Connect the Type-C input of the Baseus LightChaser Wireless Charging Electric Car Mount to a compatible power source.
2. Place your Qi-enabled smartphone on the clamping arm of the car mount.
3. The infrared induction will detect your smartphone and automatically open the clamping arm to secure it in place.
4. Your smartphone will start charging wirelessly at a maximum output of 5W/7.5W/10W/15W.
5. To remove your smartphone, simply press the tail hook button to  release the clamping arm.

Name: Baseus LightChaser Wireless Charging Electric Car Mount 15W

User Manual

Please read this user manual carefully before use and keep for future reference.
Product introduction: This product supports QI wireless charging function.

Product Specifications

• Model No.: BS-CM020
• Input: Type-C: 5V⎓ 2.4A (Max.); 9V⎓ 2.23A (Max.); 12V⎓ 1.67A (Max.)
• Wireless Charging Output: 5W/7.5W/10W/15W

Product Schematic Design

1. Wireless Charging
2. Infrared induction
3. Clamping arm
4. Clamp feet
5. Tail Hook

Installation

1. Unscrew the nut and put it onto the ball joint
2. Install the ball joint and fasten the nut
3. Hook the mount to the vent grille and fasten the nut

Package Including

1. Wireless Charging Electric Car Mount ×1
2. USB-A to Type-C charging cable ×1
3. Air vent tail hook ×1
4. User Manual ×1

User Tips

1. Please use 5V/2A, 9V/2A, or 12V/1.67A adapters for this product.
2. There must not be any metal objects between the wireless charging area and the phone, for it won’t be working.
3. The working temperature of the product is between 0°C and 25°C, otherwise it may affect the charging efficiency.
4. Please install the product onto the air vent gently to avoid damage.
5. After long-time use, there might be loosening, please reinforce the mount if this happens.
6. The coupling distance for wireless charging is 6mm, so if the phone case is too thick, it may affect the wireless charging efficiency.

FCC

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC FR exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>