XINJI N3 Nothing 3 Smart Watch User Manual
- June 13, 2024
- XINJI
Table of Contents
XINJI N3 Nothing 3 Smart Watch
Packing list
Specifications
- Product model: NOTHING 3
- Waterproof rating: IP68
- Sensor: 3-axis G-sensor
- Battery capacity: 300mAh
- Synchronization method: Bluetooth
- Resolution: 466×466
- Display: 1.43 inch AMOLED
- Battery life: about 5-7 days
- Working temperature: -10℃~50℃
- Compatible system: IOS 12.0 or above, Android 6.0 or above
Instructions Before Use
- The watch has a water resistance rating of IP68. It can be used normally in daily life such as washing hands, raining, etc. Do not put the watch in hot water, do not perform underwater pressing operations or deep diving. Not recommended to wear it in the shower.
- The waterproof function is not permanently effective, and the protective performance may be reduced due to daily wear and tear.
- Do not disassemble the product or replace the battery without authorization. If the product fails, please contact the after-sales service department.
- Avoid touching the screen surface with sharp or sticky objects to avoid damage. Avoid dropping the product on the ground or being strongly impacted by other objects. Avoid exposing the watch to corrosive liquids to avoid damage to the watch.
- Charge the battery for two hours b e f o r e u s e . P l e a s e a v o i d overcharging at 100% for an extended time. Place the magnetic charging cable on the back of your smart watch and the end of the charging cable magnetically sticks to the back of your Watch and aligns it properly.
- Please use the charger with an input voltage of 5V/1A or 5V/2A and XINJI’s original charging cable.
- This product is not a medical device and cannot be used for medical purposes or as basis for diagnosis of any medical condition. Detection results are provided for reference only. Please consult professional medical institutions if you feel unwell.
- The company reserves the right to c h a n g e o r m o d i f y a l l t h e information in the document without notice. Due to software upgrades, the functions may vary in specific software versions.
APP download & login
- Get GloryFit app in the App Store on your iPhone.
- Get GloryFit app in Google Play on your Android phone.
- Or scan the QR code in the watch to download the APP (compatible: IOS12.0 or above /Android6.0 or above);
After installing the APP, please register and login according to the interface
prompts, and turn on Bluetooth at the same time;
In the Device interface of GloryFit app, select the Bluetooth name: “XINJI-N3”
for binding, and the watch can be used normally.
Method of operation
From the home screen, Slide up from watch face main page to check the messages.
From the home screen, Slide down from main page, go to setting shortcut page.
From the home screen, slide from right to left on the watch face main page, open the shortcut interface.
From the home screen, Go to menu: slide from left to right from watch face main page to enter menu list, double click side button to change the menu style.
Press the digital crown to return to the upper level function interface; when
in the watch face screen, press the digital crown again to light up/off the
screen.
Left and right sliding on the main page and sliding up and down on the list
theme can be realized through the rotating button. In the honeycomb theme
interface, the rotating button can also directly zoom in and zoom out.
From the home screen, Press the down button to enter the sports list.
Double-click the down button to enter the voice assistant.
Training
100 sports modes are supported: outdoor running, cycling, badminton, table
tennis, tennis, hiking, walking, basketball, soccer, baseball, volleyball,
cricket, rugby, field hockey, dancing, etc.
Sport status
Record the number of steps, distance, and calories for the day. More detailed
information analysis and data records can be viewed in the APP.
Bluetooth Calling
While the watch and your phone are connected via Bluetooth, you can make
Bluetooth calls on the watch.
Message
Message reminders, sync notification from your phone, save up to 8 latest
messages .
Weather
Display the current weather conditions and the weather for the next 3 days.
The weather information will be displayed once connecting to the APP. If the
watch is disconnected for a long time, the weather information will not be
updated.
Voice assistant
Double-click the down button to enter the voice assistant, double click the
voice assistant to wake up the phone function. (Note: The watch needs to be
connected to the mobile phone via Bluetooth before it can be used.)
Heart rate monitoring
Measure the current heart rate value; the watch can record and display the
heart rate value for 24 hours, and automatically monitor the heart rate every
10 minutes. More detailed analysis and data records can be viewed in the APP.
Blood oxygen monitoring
Test the current blood oxygen value; it monitors blood oxygen throughout the
day, more detailed analysis and data records can be viewed in the APP.
Sleep monitoring
Record and display the total sleeping hours, deep sleep and light sleep of the
previous night. More detailed analysis and data records can be viewed in the
APP.
Music
control
After connecting to the mobile phone, you can click “play/pause/previous/next
song” on the smart watch to control the music from mobile phone, and the
volume can be adjusted.
Alarm
8 alarm reminders can be set, the watch will vibrate and the screen will be
bright.
Pressure
Measure the current pressure, the watch can record and display the pressure
value 24 hours a day. More detailed information analysis and data records can
be viewed in the APP.
Mood
Test the current mood. More detailed information analysis and data records can
be viewed in the APP.
Respiratory rate
Measure the current respiratory rate.
Breathing training
You can set the breathing rhythm and time, and follow the training prompts to
complete the breathing training.
Always on display
Open the AOD clock in the watch settings and select digital clock or analog
clock. The w a t c h w i l l c o n t i n u e t o s h o w t h e corresponding
clock interface while it is asleep.
Watch face
Press and hold the watch face for 3 seconds to enter selection interface.
Slide left and right to switch the watch face, and set it.
SOS
You can add contacts in “SOS call” on the APP side.
Power on/off
Long press button for 3s to power on. The watch will automatically power on
when it is charging. Choose ‘Power Off’ in the watch setting and click ‘√’
icon to shutdown.
System info
View the Bluetooth name, Mac address, Firmware version number and other
information of the watch.
Reset
All personal data will be removed if you confirm to restore factory settings.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>