Eastbrook 6LSP1 Shower Enclosures Installation Guide
- August 2, 2024
- Eastbrook
Table of Contents
Eastbrook 6LSP1 Shower Enclosures
Specifications
- Brand: Eastbrook
- Model: Code 69.0141
- Adjustment: 871-847
- Materials:
- Zinc Alloy for pivot axis (6LSP16) and pivot base (6LSP10) of fixed glass
- Nylon for specified components
Product Usage Instructions
Installation
This product should only be installed by a fully qualified installer.
Cleaning and Maintenance
- Do not clean the shower enclosure with irritant detergents such as alcohol, bleach, or other chemical cleaners.
- Only clean with mild soapy water or a proprietary cleaner suitable for the materials the enclosure is constructed from; test on a small area first.
- For treating limescale, use distilled vinegar in a half-and-half solution with water.
- If there is notable noise when the glass door moves after installation, apply a small amount of silicone lubricant onto the roller wheels, tracks, hinges, or clips.
- Regularly check for broken or loose parts to prevent future failure of the enclosure or screen.
Technical Support
For technical assistance, contact the Technical Helpline at 01452 317890. Open Mon-Fri 8am to 5pm. Email: technical@eastbrookco.com
| Eastbrook Code | Adjustment | Eastbrook Code | Adjustment |
|---|---|---|---|
| 69.0141 | 871-847 |
PARTS
The pivot axis 6LSP16 and pivot base 6LSP10 of fixed glass are zinc alloy. This product should only be fixed by a fully qualified installer
TOOL
INSTALLATION INSTEUCTION
Cleaning and Maintainence of Shower Enclosures
- Do not clean the shower enclosure with irritant detergents such as alcohol, bleach or other chemical cleaners.
- Only clean with mild soapy water or a propriotory cleaner where the label advises it is suitable for the materials the enclosure is constructed from, test on a small area first.
- For treating limescale we would recommend distilled vinegar in a half and half solution with water.
- Following installation should you find that there is a notable noise when the glass door moves you may add a small amount of silicone lubricant onto the roller wheels and tracks, hinges or clips.
- It is the responsibility of the product owner to maintain the product as recommended above. Also to check for parts which have broken or become loose to protect against future failure of the enclosure or screen.
Technical Helpline: 01452 317890
Open Mon-Fri 8am to 5pm:
technical@eastbrookco.com
FAQ
- Q: Can I use any cleaner to clean the shower enclosure?
- A: No, only clean with mild soapy water or a cleaner recommended for the materials used in the enclosure.
- Q: What should I do if I hear noise when the glass door moves?
- A: Apply a small amount of silicone lubricant to the moving parts such as roller wheels, tracks, hinges, or clips.
Read User Manual Online (PDF format)
Loading......