Eastbrook 98.2014 Tap Handle Instruction Manual
- July 30, 2024
- Eastbrook
Table of Contents
Eastbrook 98.2014 Tap Handle
Product Information
Specifications:
- Handle Type: Red and Blue
- Locking Screw: M6
- Allen Key Size: S3
Product Usage Instructions
Installation:
- Remove any unnecessary handles from the tap body.
- Place the handle on the stem and turn the valve to the closed position.
- Adjust the handle direction, tighten the M6 screw using the S3 Allen key.
- Install the handle pole onto the handle.
Turning Off:
Turn the switch counterclockwise to turn off the water flow.
Turning On:
To turn on the water flow:
- Turn the switch clockwise to turn on the water.
- Turn the switch anticlockwise to turn on the water in the opposite direction.
FAQ
-
Q: How do I adjust the direction of the handle?
A: After placing the handle on the stem, you can adjust its direction before tightening the M6 screw using the S3 Allen key. -
Q: What should I do if the handle feels loose after installation?
A: Check if the M6 screw is securely tightened using the S3 Allen key. If it feels loose, re-tighten the screw to ensure a firm grip.
Installation and operation instruction
- As shown in fig.1, remove the unneeded handles from the tap body before installation.
- Put the handle on the stem, turn the valve into closed position, then adjust the direction of the handle, tighten the M6 screw with S3 Allen key, then install the handle pole on the handle.
Read User Manual Online (PDF format)
Loading......