SUB-ZERO 7026122 Tubular and Pro Handle Installation Guide
- September 4, 2024
- SUB-ZERO
Table of Contents
SUB-ZERO 7026122 Tubular and Pro Handle Installation Guide
TUBULAR HANDLE
| 603/4″ | 557/16″ |
|---|---|
| 501/8″ | 471/8″ |
| 43″ | 369/16″ |
| 401/8″ | 3413/16″ |
| 37″ | 309/16″ |
| 331/4″ | 301/4″ |
| 31″ | 249/16″ |
| 271/4″ | 241/4″ |
| 25″ | 189/16″ |
| 241/4″ | 211/4″ |
| 221/2″ | 191/2″ |
| 211/4″ | 181/4″ |
| 201/2″ | 171/2″ |
PRO HANDLE
| 5611/16″ | 557/16″ |
|---|---|
| 483/8″ | 471/8″ |
| 42″ | 403/4″ |
| 361/16″ | 3413/16″ |
| 311/2″ | 301/4″ |
| 30″ | 283/4″ |
| 251/2″ | 241/2″ |
| 24″ | 223/4″ |
| 221/2″ | 211/4″ |
| 201/2″ | 191/4″ |
| 191/2″ | 181/4″ |
TUBULAR AND PRO HANDLE INSTALLATION
-
Panels thicker than 3/4” may require additional counter bore depth or longer screws.
-
Determine the overall length of the handle. IMPORTANT NOTE: For pro handles, the overall length includes the
-
Use the chart to determine the correct hole location, then mark and drill two 7/32″ holes
-
Counter bore panels so the screw heads and washers are completely
-
Place a star and flat washer on each screw, then insert the screw through the
-
Insert the screws through the standoffs and into the
-
Tighten the screws to secure the handle to the
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Loading......