BLAUPUNKT 368417 Ice Cube Air Cooler Owner’s Manual

BLAUPUNKT 368417 Ice Cube Air Cooler Owner's Manual

IMPORTANT:

PLEASE READ ALL OF THE INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE REFERENCE.

IMPORTANT SAFETY INSTRUCTIONS

• When using electrical products, basic safety precautions should always be followed.
• Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the product to the mains power supply.
• Children younger than 3 years old should be kept away from the product unless continuously supervised.
• Children aged from 3 years and less than 8 years should not plug in, regulate or clean the product or perform user maintenance.
• Children aged from 8 years and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance, only if it has been placed in its intended operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children should not perform cleaning or user maintenance unless they are older than 8 years and supervised.
• This is not a toy – children should be supervised to ensure they do not play with the product.
• Always unplug the product and allow to cool fully after use and before any cleaning or maintenance.
• Normal voltage is still present in this product as long as the product is connected to the electrical source.
• This product contains no user serviceable parts. If the power supply cord, plug or any part of the product is malfunctioning or if it has been dropped or damaged, only a qualified electrician should carry out repairs. Improper repairs may place the user at risk of harm.
• Keep the product and its power supply cord out of the reach of children and away from heat or sharp edges that could cause damage. This includes any parts of the product that may become hot during use and other heat emitting products.
• Keep the power supply cord away from any parts of the product that may become hot during use.
• Keep hands, fingers, hair and any loose clothing away from the rotating parts of the product.Do not immerse the product in water or any other liquid.
• Do not operate the product with wet hands.
• Do not leave the product unattended whilst connected to the power supply or when in use.
• Do not remove the product from the power supply by pulling the cord; switch it off and remove the plug by hand.
• Do not use this product for extended periods of time.
• Do not leave the product plugged in or operating overnight.
• Do not use the product for anything other than its intended use.
• Do not use this product outdoors.
• Do not move the product whilst it is in use.
• Do not shake the product.
• Do not cover the product.
• Do not put objects into any of the openings.
• Do not clean the product with abrasive chemicals or materials such as scourers, as they may damage the product. This includes insecticide and chemical solvents.
• Always use the product on a flat, stable surface.
• Use of an extension cord with the product is not recommended.
• This product should not be operated by means of an external timer or separate remote control system, other than that supplied with this product.
• This product is intended for domestic use only. It should not be used for commercial purposes.
• This product should only be used with the power supply unit provided.

WARNING : If a strong odour is emitted from the product, turn the product off and unplug it from the mains power supply.
Should the product fall or be pushed over while there is water in the tank, it must be unplugged from the mains outlet immediately as a first action. The product should be righted and dried thoroughly before it is used again.

GETTING STARTED

Remove the air cooler from the box.
Remove any packaging from the air cooler.
Place the packaging inside the box and either store or dispose of safely.

IN THE BOX

Ice Cube Air Cooler
USB cable
Mains to USB adaptor
Instruction manual

FEATURES

[TO MATCH AW]

DESCRIPTION OF PARTS

1. Ice Cube Air Cooler main unit
2. Water tank(s)
3. Filter block
4. Water tank access doors
5. Horizontal grill
6. Power button
7. Indicator light(s)
8. Mood lights
9. Cooling speed button (COOL)
10. Mood light button (LIGHT)
11. Micro USB port
12. USB power cable
13. Mains to USB adaptor

INSTRUCTIONS FOR USE

The air cooler is designed to be operated using a USB power source. It can be used with or without water, but for optimum cooling it is recommended to fill the air cooler water tanks with water following the instructions below.

Filling the Ice Cube Air Cooler

The air cooler must be switched off and unplugged from the power supply before filling the water tanks.
STEP 1 : Open the water tank access doors and pull the water tanks up and away from the air cooler.
STEP 2 : Remove the filter block by lifting and sliding it sideways out of the air cooler and run it under a steady stream of cool, clean water so that the filter becomes fully wet. Shake gently to remove the excess and replace the filter block into the air cooler.
STEP 3 : Remove the water tanks, unscrew the caps and fill them to the brim with cool, clean water. Replace the caps and slide the water tanks back into position so that they are seated properly. The valves in the caps should begin to release the water into the air cooler. This will fill the reservoir in the base of the air cooler main unit with water.
STEP 4: Carefully close the water tank access doors.

Note : For additional cooling, the water tanks can be filled to the indicated line and placed upright into the freezer for 8 hours. When the tanks have fully frozen, they can be topped up to the brim with cool, clean water and then inserted into the air cooler following the instructions in the section entitled ‘Filling the Ice Cube Plus Personal Space Cooler’.
The wet filter block can be placed in the freezer with the water tanks for 8 hours until frozen to increase the cooling effect.
Do not freeze the water tanks with the caps on – this could cause damage to the valves and to the water tanks.

Caution : Do not fill the air cooler with any liquid other than cool, clean water. Do not use any additives in the water.

Using the Ice Cube Air Cooler

STEP 1: Plug in and switch on the air cooler at the desired power supply. Press the power button to turn on the air cooler.
STEP 2: The desired cooling speed can be selected by pressing ‘COOL’. Cycle through the speeds numbered 1–3, 3 being the strongest cooling speed. The indicator lights will show the speed selected.
STEP 3: Turn on the mood light by pushing ‘LIGHT’. Cycle through the seven colours by repeatedly pressing ‘LIGHT’ until the desired colour setting has been selected.
STEP 4: To regulate the direction of the airflow, manually adjust the horizontal grills on the front of the air cooler.
STEP 5 : Turn off the air cooler by pressing the power button

Note: Always remove the excess water and allow the air cooler to dry after each use to avoid a build-up of lime scale and bacteria
The air cooler is not designed to significantly reduce the room temperature but will provide a localised cool breeze for a small space.
When positioning the air cooler, do not lift it by the front panel.
Keep the air cooler level when filled with water to avoid spills. This is due to the water reservoir which is located in the base of the unit.
It is normal to see water droplets form on or around the tanks. This is no cause for concern.
Simply wipe away the droplets with an absorbent cloth.

STORAGE

Drain the water tanks and allow the air cooler to cool before storing in a cool, dry place.
Carefully coil the power cable to avoid damage during storage.

CARE AND MAINTENANCE

Always wait until the air cooler has stopped completely and unplug it from the mains power supply before performing any cleaning or user maintenance.
Wipe the air cooler with a soft, damp, lint-free cloth and allow to dry thoroughly.
Do not immerse the air cooler in water or any other liquid.
STEP 1: The water tanks must be drained of any water after each use. To do so, carefully open the access doors and pull the water tanks out from the air cooler. Unscrew the caps and tip away any excess water. Once the water tanks have been drained, shake to remove any excess and leave to dry with the caps off.
STEP 2 : To clean the filter, lift the filter block up and slide it out of one of the sides of the air cooler main unit. Remove any loose fibres by hand and rinse with cool, clean water. Leave the filter block to air dry if not using the air cooler immediately after carrying out maintenance. Alternatively, place the filter into a dishwasher at 35 °C for approx. 35 minutes and then leave to air-dry.
STEP 3: Before replacing the water tanks and filter block, wipe the inside of the air cooler with an absorbent cloth to remove any excess water from the water reservoir (located in the base of the unit). Any limescale deposits in the air cooler can be removed with a soft, damp cloth and mild detergent.
STEP 4: Wipe the exterior of the air cooler with a soft, damp cloth and dry thoroughly. The filter block and water tanks can be replaced once dried thoroughly. Do not use flammable liquid, abrasive cleaning solvents, polishes or scouring pads to clean the air cooler as this may cause damage.

Note : Clean the air cooler and all of its parts regularly to reduce the risk of limescale and bacteria forming.
If there is any mould on the filter block or a musty smell coming from the air cooler, remove the filter block and fully immerse in a solution of equal parts water and white vinegar. Allow the filter block to soak for 45–60 minutes before rinsing thoroughly in warm water. Allow to air-dry.
It is advised that the filter is replaced every 6–12 months. Contact our customer service team to order a new filter at customersupport@beldray.com

ELECTRICAL INFORMATION

(Fixed Mains Plug Only)

The mains lead supplied with this product is fitted with a BS1363/A 13 amp plug. If it is not suitable for your supply sockets it must be replaced with an appropriate plug.
If the plug becomes damaged and/or needs to be replaced please follow the wiring instructions on the next page.
The plug removed must be disposed of immediately. It must not be plugged into a supply socket as this will be an electrical hazard.
If the fuse needs to be replaced it must be of the same rating and ASTA approved to BS1362. If the plug is changed, a fuse of the appropriate rating must be fitted in the plug, adapter or at the distribution board. If the fuse in a moulded plug is replaced, the fuse cover must be refitted before the application can be used.

WIRING INSTRUCTIONS

The supply cable will be either 2-core or 3-core. Follow the appropriate wiring instructions shown. In both cases ensure that the outer sheath of the cable is held firmly in place by the cable clamp.

ELECTRICAL INFORMATION

(Power adapters only)
Never open the power adapter, you risk getting an electric shock. Only use the power adapter that is supplied with your product. You must always connect the power adapter to the product before connecting to the mains power supply. The power adapter must be used indoors only, and must not be subjected to damp conditions. The power adapter does not have any user serviceable parts.

TROUBLESHOOTING

TECHNICAL SPECIFICATION

Information on Waste Disposal for Consumers of Electrical & Electronic Equipment

This mark on a product and/or accompanying documents indicates that when it is to be disposed of, it must be treated as Waste Electrical & Electronic Equipment (WEEE).
Any WEEE marked waste products must not be mixed with general household waste, but kept separate for the treatment, recovery and recycling of the materials used.
For proper treatment, recovery and recycling; please take all WEEE marked waste to your Local
Authority Civic waste site, where it will be accepted free of charge.
If all consumers dispose of Waste Electrical & Electronic Equipment correctly, they will be helping to save valuable resources and preventing any potential negative effects upon human health and the environment, of any hazardous materials that the waste may contain.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>