TRONIC TPA 30 A1 Dual USB Charger Instruction Manual

TPA 30 A1 Dual USB Charger
Instruction Manual
DUAL USB CHARGER
Operation and Safety Notes

Operation and Safety Notes

TPA 30 A1 Dual USB Charger

Warnings and symbols used
These instructions for use contain the following symbols and warnings:

| DANGER! This symbol with the signal word “DANGER“ indicates a hazard with a high level  of risk which, if not avoided, will result in serious injury or death.
---|---
| WARNING! This symbol with the signal word “WARNING“ indicates a hazard with a medium  level of risk which, if not avoided, could result in serious injury.
| CAUTION! This symbol with the signal word “CAUTION“ indicates a hazard with a low level  of risk which, if not avoided, could result in minor or moderate injury.
| ATTENTION! This symbol with the signal word“ ATTENTION“ indicates a potential  property damage, if not avoided, could result in property damage.
| NOTE: This symbol with the signal word “NOTE“ provides additional useful information.
| Direct current / voltage
| Alternating current / voltage
| Use product only in dry indoor areas.
****| Safety class II The product has double insulation and no safety connection with grounding is required.
| Technology to optimise charging time.

DUAL USB CHARGER

Introduction
We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They
contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the unit as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intended use
This DUAL USB CHARGER (hereinafter called “product“) is an information technology device designed for charging and operating USB devices that are charged or operated from a USB port by default. The product can be used in a normal socket which provides the power supply stated in the “Technical Data“. The product is not intended for commercial use. The manufacturer is not liable for any damages caused by any use other than for the intended purpose.

Description of parts
Please refer to the fold out page.

1. USB port (Type A)
2. USB port (Type C)

Manufacturer’s name or trade mark, commercial registration number and address:| OWIM GmbH & Co.
KG HRA 721742 Stiftsbergstraße 1, 74167 Neckarsulm,
GERMANY
Model identifier:| HG07782A
HG07782B
Input voltage and current:| 100‒240 V∼ , 1.0 A
Input AC frequency:| 50/60 Hz
Output voltage USB Type A:| 5.0 V
Output voltage USB Type C (PD*):|  5.0 V , or
9.0 V , or
12 V ***
Output current USB Type A:| 2.4 A
Output current USB Type C (PD):| 3 A (for 5.0 V )
2 A (for 9.0 V )
1.5 A (for 12.0 V )
Output power:| 30.0 W (USB Type A & C)
12.0 W (USB Type A)
18.0 W (USB Type C)
Average active efficiency:| 81.60%
Efficiency at low load (10 %):| 75.60%
No-load power consumption:| 0.30 W
Protection class:| II / ****
Operating conditions:| 10 – 35 °C , 40 to 85 % rel. humidity
Storage temperature:| 10 – 45 °C
Dimensions:| approx. 9 x 3.5 x 5 cm
Weight:| approx. 85 g

*Power Delivery (PD) is a cutting edge technology which enables extremely fast charging for all PD-compatible devices, including Apple iPhone and Samsung Android mobile devices.
GS Certified

Scope of delivery
1 USB charger with 2 USB ports
1 Set of operating instructions

Safety notices

PLEASE READ THE INSTRUCTIONS PRIOR TO USE! PLEASE KEEP THE INSTRUCTIONS IN A SAFE PLACE!

• Check the product for damage before use. Never use a damaged product.
•   This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and  knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play  with the product. Cleaning and user maintenance shall not be made by children without supervision.
• Packaging materials are not a toy. Never leave children unsupervised with the packaging material. Children frequently underestimate the dangers. Always keep children  away from the packaging material.
• **** Suitable for indoor use only. Do not expose the product to direct sunlight or moisture.

**WARNING!**

• Unplug the product during lightning storms or when unused for long periods of time.
• Grip the power plug everytime directly whenever you want to pull it from the mains socket.
• Never touch the power plug with wet hands, as this could result in either a short circuit or electric shock.
• The mains socket used must be easily accessible so that the power plug can be quickly disconnected in an emergency.
• To completely disconnect the product from the power, you must remove the power plug from the mains socket. The power plug serves as a separator. At standby mode,  a minor power is consumed.
• If you notice any unusual noise, smoke or similar uncertian situations, immediately disconnect the power plug from the mains socket and disconnect all connected devices. Have the product checked by a qualified person before using it again.

WARNING!

• Before operating this product, check the input voltage of this product to see if it  is identical to the voltage of your local power supply.
• Unplug the product from the mains socket before cleaning.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• Never open the housing of the product! It has no internal parts requiring maintenance.
• Do not cover the product during operation or charging. Otherwise the product can be overheated.

ATTENTION! RISK OF PROPERTY DAMAGE

• This product does not contain any parts which can be serviced by the user.
• Do not place burning candles or other open fire on or next to the product.
• Check the product and accessories for damage before each use. Never use a damaged product.
• Do not operate the product near heat sources, e.g. radiators or other devices emitting heat!

**ATTENTION!** Ensure that:

• the product is not exposed to bright artificial light.
• any contact with splashed and dripping water and corrosive liquids is avoided  and the product are not operated in the vicinity of water. In particular, the productshould  never be submerged in liquid; do not place any vessels filled with liquid, for  example, vases or drinks, on or near the product.
• the product is not used in the immediate  vicinity of magnetic fields (e.g. speakers).
• no foreign objects penetrate the product.
• the product is never subjected to extreme temperature fluctuations as this could result in condensation and electrical short circuits. If the product were subjected to  extreme temperature fluctuations, however, wait (approx. 2 hours) until the product has reached ambient temperature  before use.
• the product is never subjected to excessive shocks and vibrations.

Before use

• Remove all packaging materials (including foils).
• Verify the package contents are complete and undamaged!
• Place the product on a level, even surface.

Start-up

ATTENTION! RISK OF PROPERTY
DAMAGE The total power consumption of the connected devices must not exceed 30 W (USB Type-A 12 W 1 and USBType-C 18 W 2 ).

• Plug the product into a correctly installed socket.
• Connect the appliance that should be charged with the product by plugging its USB-plug into the output USB port 1 (Type A) or output USB port 2 (Type C).
• Disconnect the charged appliance from  the product after charging, by unpluggingthe USB-plug from the USB-socket.
• Unplug the adapter from the socket.

Troubleshooting

What should I do if external devices cannot get power from the product?

• Check the USB cable (not included) connection between the external devices and the product.
• Make sure the external device‘s charging socket is working properly.

What should I do if the device charges very slowly?

• Check if you have connected the device to the wrong USB port.
• Check if your device is Quick Charge capable.

Storage when not in use

• Store the product in a dry environment, protected from dust and direct sunlight.

Cleaning and Care

• Disconnect the product from the mains socket and remove all plugs before cleaning!
• Be sure moisture does not enter the product during cleaning to prevent damage to the product and related repairs.
• Only use a clean, dry cloth for cleaning the product and never use any corrosive liquids / abrasive cleaning agents. Use a slightly moistened cloth and a mild cleaning  agent to remove stubborn dirt.

Disposal

Packaging:
The packaging is made of environmentally friendly materials, which may be disposed of through your local recycling facilities.

**** Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1 – 7: plastics / 20 – 22: paper and fibreboard / 80 – 98: composite materials.

Product:

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
The adjacent symbol of a crossed out dustbin on wheels indicates this product is subject to Directive 2012/19/EU. This directive states at the end of the life this product must not be disposed of through regular household refuse but must be returned to special collection sites, recycling depots or waste management companies.

This disposal is free of charge to you.
Protect the environment and dispose of properly.

Warranty and service

Warranty
The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase.
Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. This warranty becomes void if the product has been damaged, or used or maintained improperly.
The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase.
You will find the item number on the rating plate, an engraving, on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.
If functional or other defects occur, please  contact the service department listed eitherby telephone or by e-mail.
You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and  information about what the defect is and when it occurred.

Service
Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1800 200736
E-Mail: owim@lidl.iehttp://www.lidl-service.com
OWIM GmbH & Co. KG
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Model-No.: HG07782A/HG07782B
Version: 07/2021
IAN 377473_2101

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>