BOKE BK-BML040-B0950A Constant Current LED Driver Instruction Manual

BOKE BK-BML040-B0950A Constant Current LED Driver

Product Information

• Flicker-free output, which meets the requirement of flicker-free standard
• Withstand 380VAC high voltage short-time interference shock
• Circular compact appearance design, output wire connection
• SELV and Class II design, suitable for use inside of the light
• Conform CE, ENEC, UKCA, RCM, EL certifications
• IP30 protection grade, indoor use
• Nominal life-time up to 100,000 h
• 5-year guarantee

Model Coding Rules| BK-BMLXXX-BXXXX
Functions|

• Support central emergency application (100% output in DC input)
• Protective features (short-circuit, no-load protection)

Suitable for lights|

• Suitable for lights with built-in drivers such as circular guide rail lamps and downlights
• Not suitable for lights with external drivers

Typical Applications|

• LED indoor lighting
• LED office lighting
• LED building lighting

Contact Information| Email: [email protected]
Website: www.bokedriver.com

Model coding rules of BML series

Technical data

Product model| BK-BML040-B0950A| BK-BML040-B1000A|
---|---|---|---
Output parameters

Regulation method

| Constant Current                      Constant Current
Rated output current range| 0.5-0.95A| 1A|
Rated output voltage range| | |
Rated output power| 28-42VDC| 28-40VDC|
Output current adjustment| 39.9W Max

Fixed output

| F 40W Max t

ixed outpu

|
Output current ripple LF| ±1%| ±1%|
Output current accuracy| ±5%| ±5%|
Linear regulation| ±5%| ±5%|
| | |
Load regulation

No load output voltage

| ±5%| ±5%|
| 52VDC
Flicker-free(typical) Input parameters| Flickering percent(IEEE 1789)=0.414%, Flicker index(IEEE 1789)=0.001, Pst LM = 0.021, SVM = 0.006, (The above parameters are obtained from testing the panel lights)
Rated input voltage range| |
Input voltage range| 180-264VAC 180-264VDC
Input votage shock| <380V AC
Input current| <0.24A (Rated input voltage)
Input frequency| 0/50/60Hz
Input PF/Input DF| PF>0.95 (230V AC & Full load), DF>0.98 (230V AC & Full load)
| 10% (230V AC & Full load)
Input THD

Efficiency(typical)

| 87.5% (230V AC & Full load)
In-rush current| 16A peak ,250us duration(50 % Ipeak), see the description below for details
Start/Switchover/Turn off| <0.5s(AC start),<0.5s(DC start),<0.3s(AC/DC switchover),<0.5s(Turn off )
| > 50,000 switching cycles
Switching cycles

Power consumption

| Full load(Pin):45.7W, No load(Pno): N/A, On stand-by(Psb) : N/A , Network stand-by(Pnet) : N/A
Safety|
Withstand voltage| I/P-O/P:3750V AC|
Mains surge capability| L-N:2KV(Performance criterion :B)
Leakage current| <0.7mA (230V AC & Full load)
|
Isolation resistance

Control interface

| I/P-O/P:100MΩ/500Vdc/25℃/70% RH
DALI dimming port| N/A|
pushDIM dimming port|
1-10V 3in1 dimming port| N/A
Auxiliary power supply|
Dimming range| N/A

N/A

Dimming drive mode| N/A
|
Emergency support ystem

Central emergency s

| Supported(100% output in DC input mode)|
|
Self-contained emergency| Supported
Environment & Life time
Operating temperature| Ta=-20-60℃
Case temperature

Operating humidity

| Tc=90℃
| 5-85% RH, not condensed
Storage temp./humidity| -40-80℃, 5-85% RH, not condensed
IP grade

MTBF

| IP30

500,000H,MIL-HDBK-217F(25℃)

|
Life-time| Nominal life-time up to 100,000 h, see the description below for details
Vibration resistant

Acoustic Noise

| 10~500Hz,5G 12min./1cycle,period for 72min. each along X,Y,Z axes

<25dB(30cm, Normal operation)

Environmental protection|
Certifications and standards| RoHS
Certified| CE, ENEC, UKCA, RCM, EL

EN61347-1, EN61347-2-13, EN62384

Safety|
EMC

DALI-2

| EN55015, EN61000-3-2 , EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547

N/A

|
EL| Compatible IEC 61347-2- 13 Annex J , compatible with EN 60598-2-22 and EN 50172
RF| N/A

Remarks

1. By default, all parameter are measured at 230VAC input, full load and 25℃ of ambient temperature.

Product Usage Instructions

To use the Constant current built-in driver BML-B Series, please follow these instructions:

1. Ensure that the light you are using is compatible with built-in drivers.
2. Select the appropriate model based on your required output parameters.
3. Connect the driver to the light’s output wire using circular compact appearance design.
4. Make sure the driver is placed inside the light and adheres to SELV and Class II design standards.
5. Check if the driver has the necessary certifications (CE, ENEC, UKCA, RCM, EL).
6. The driver is suitable for indoor use with IP30 protection grade.
7. The nominal lifetime of the driver is up to 100,000 hours, and it comes with a 5-year guarantee.
8. If you require central emergency application, ensure that the driver supports 100% output in DC input.
9. The driver also provides protective features such as short-circuit and no-load protection.
10. For lights with external drivers, this driver is not suitable.

Electrical values

BK-BML040-B

Expected life-time

BK-BML040-B
Life-time vs. case temperature

• The life-time of the LED driver (calculated based on the 90% survival rate).
• The relation of tc to ta temperature depends also on the luminaire design.

Surge

Remarks

• The number of drives mounted under different MCBs in the table is the maximum value. Please do not exceed this number during installation.
• Calculation uses typical values from ABB series S200 as a reference.
• Different brands and models of miniature circuit breakers, the number of drives mounted will be slightly different.
• If the ambient temperature of the MCB installation exceeds 30°C or multiple MCBs are installed side by side, the number of drives mounted will be reduced and the calculation needs to be recalculated.
• Electrician’s usually consider Type B for household lighting and Type C for commercial lighting application.

Functions

Output short-circuit behaviour

• Output short-circuit will not damage the driver.
• After removing the short-circuit fault point, the drive will automatically restore output.

Output no-load operation

• Output no-load will not damage the driver.
• Please turn off the power supply of the driver first if you need to connect the LED load.

Label

BK-BML040-B

Installation Mechanical dimensions

Unit: mm

BK-BML040-B

Input wire

Numbering| function| Wire name| colour| Wire type| Wire diameter| Wire length| Strip length
---|---|---|---|---|---|---|---
1| ACL/DC+| Double insulated electronic wire| brown| UL1672| AWG20| 150mm| 10mm
2| ACN/DC-| Double insulated electronic wire| blue| UL1672| AWG20| 150mm| 10mm

Output wire

Numbering| function| Wire name| colour| Wire type| Wire diameter| Wire length| Strip length
---|---|---|---|---|---|---|---
1| LED+| Double insulated electronic wire| red| UL1672| AWG20| 150mm| 10mm
2| LED-| Double insulated electronic wire| black| UL1672| AWG20| 150mm| 10mm

Installation note

Hot plug-in

• Hot plug-in is not supported due to residual output voltage of > 0 V.

Wiring guidelines

• All connections must be kept as short as possible to ensure good EMI behaviour.
• Mains leads should be kept apart from LED Driver and other leads (ideally 5 ‒ 10 cm distance)
• Max. lenght of output wires is 2 m.
• Incorrect wiring can damage LED modules.

Mounting screw specifications and torque

• Max. torque at the clamping screw: 0.5 Nm / M4

Replace LED module

1. Mains off
2. Remove LED module
3. Wait for 5 seconds
4. Connect LED module again

Installation requirements

• The installation ambient temperature of the drive shall not exceed the value of Ta at any time.

Please do not stack the products. The distance between two products should be ≥15cm so as not to affect heat dissipation and the lifespan of the products.

Packaging

Additional information

1. The life and MTBF of the product are for reference only, and do not represent a warranty statement. If the drive has been turned on, there is no warranty.
2. For more information, please send an email to [email protected].

[email protected]
www.bokedriver.com
REV 1.0 2022-5-14

References

• Home — BOKE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>