GIMA 28040 Electric Beauty Bed Instruction Manual

GIMA 28040 Electric Beauty Bed

ABOUT THIS MANUAL

This manual shall only be used for the reference of operation of this particular model. If the manual is used for other purposes, we will not undertake any according consequences and responsibility.
All information of this manual shall be protected by copyright and shall not be copied and translated in any part of this specification without the written consent of manufacturer.

WARNING

• Power supply must be cut off when changing electrical components or maintaining and cleaning machines.
• The plug must be plugged into an outlet that is properly installed and grounded, to prevent the risk of fire and electric shock.
• Do not stand on this equipment.
• Do not allow children to play with and place the equipment in a place where children can touch. Please adjust the backrest to the highest position when you leave.
• Please do not place the equipment in wet places such as bathroom to avoid electric shock or other failure; Also keep the controllers away from water.
• Please do not place and operate the equipment in places where is painting/coating or supplying oxygen.
• Unless being monitored or instructed by personnel who can be responsible for their personal safety, the people who have physical obstacles, tactile disorders, mental disorders, lack of experience, common sense or children, are not allowed to use the equipment.
• Please contact distributor, service center or related personal with appropriate skill and experience for repairing if the plug is damaged, in case of any danger.
• Please make sure there is no accessible thing within the stroke during any operation of the beds.
• Operation should be processed by trained professionals.

PRECAUTIONS

• The equipment should be used by an experienced person who must be familiar with the product structure, performance and instructions. And make the regular maintenance work.
• Read this manual carefully before installation, operation and adjustment. And please keep it well.
• This product shall not be used for single side or single point loading work.
• Comply with safety operation rules, do not overload the use of products, to ensure that the product safety protection equipment is complete and reliable, eliminates unsafe factors on time.
• Tighten bolts and nuts regularly to avoid failure caused by loose, sliding, vibration and falling parts.
• During the maintenance, the operator shall not disassemble any parts of the bed at will.
• This product is not allowed to operate when it’s with fault. If abnormal phenomenon or abnormal sound is found, it must be stopped for inspection immediately, and work can be resumed after troubleshooting.
• The operator must be familiar with the precautions described in each section of the manual to ensure the safety of person and product.
• This electric beauty bed is equipped with a three-wire power cord. The power cord must be plugged into a three-hole outlet which is properly installed and grounded. This is not only to prevent the risk of electric shock, but also ensure bed work properly.
• Please operate the equipment strictly accordance with the warning label pasted to the products.
• While controlling the lifting of the whole bed, the button must be pressed continuously until the bed in a suitable position.
• Please pay attention that the continuous working times should be Max. 2Min. ON; 18Min. OFF, when operating the motor.
• Maintenance should be processed by trained professionals.
• After each treatment, please use neutral reagent to clear the dust, stains on leather or on wood pieces.
• When adjusting the backrest, seat cushion, footrest or lifting of the whole bed by hand controller or installed foot controller, please keep your hands, feet and head away from the position. (Please see right picture)
  

APPLICABLE RANGE

These electric beauty beds are suitable for beauty, massage and manicure treatment.

INSTALLATION

1. Put the bed to a proper location, according to the overall layout, the daylighting or artificial lightings and operation condition of the salon’s or the home. And keep it in the clean, dry and cool environment.

2. Open the packing carton to check if the bed is intact and whether the accessories or spares are complete. Please contact distributor or us if there’s any problem.

3. Installation
   Place the bed to the proper position. Please note that it is unnecessary to install extra screw on the floor to fasten the bed, because the original design has taken the stability performance into consideration. But please ensure the bed is placed on a firm and flat ground, so as to prevent any accident. If the bed rotates or slant due to rough ground, please adjust the four pieces rubber feet (M10x30) and nuts (M10) fasten on the chassis by hexagon open-end wrench, so as to ensure the bed is stable.

4. Connect the plug with power supply properly. (Details as shown below)
   

STRUCTURE OF ELECTRIC BEAUTY BED

• This beauty bed consists of control box, motor, hardware, plastic parts and leather. Among them, the control box is controlling the operation of the motors and the hand controller. .
• This beauty bed includes angle adjustment of the backrest, seat cushion, footrest, and lifting adjustment of the whole bed which is an overall and integral structure. (Details as shown below).

1. angle adjustment of the backrest
2. lifting adjustment of the whole bed
3. angle adjustment of the seat
4. angle adjustment of the footrest (manual adjustment)
   

OPERATION INSTRUCTION

| DESCRIPTION| OPERATION
---|---|---
1| Button for Backrest Adjustment| Press button up (down), backrest moves up (down), angle increases (decreases) at a constant speed.
2| Button for Seat Adjustment| Press button up (down), seat inclines backward (moves back to horizontal position).
3| Button for Footrest Adjustment| Press button up (down), footrest moves up (down), angle decreases (increases) at a constant speed.
4| Button for Footrest Adjustment (left)| Press button up (down), footrest moves up (down), angle decreases (increases) at a constant speed.
5| Button for Height Control| Press button up (down), seat moves up (down), height increases (decreases) at a constant speed.

Optional Configuration
(Hand Controller)| Optional Configuration
(Hand Controller)| Optional Configuration
(Foot Controller)
---|---|---
| |
| DESCRIPTION| OPERATION
---|---|---
1| Backrest moves up| Backrest goes up smoothly by pressing the button.
2| Backrest moves down| Backrest goes down smoothly by pressing the button
3| Whole bed moves up| The bed goes up smoothly by pressing the button
4| Whole bed moves down| The bed goes down smoothly by pressing the button
5| Seat cushion up| Seat inclining smoothly by pressing the button
6| Seat cushion down| Seat goes flat smoothly by pressing the button
7| Indicator light of heating function (Option)| Pressing the button, the light is on, the heating function works; pressing the button again, the light is off, the heating function stops.
8| Heating (Option)|

Notes

1. The memory position setting is only available for the models with memory function.
2. The heating function is only available for the models with heating function.
3. Different hand controllers should be chosen according to different configuration.

TECHNICAL PARAMETERS

MAINTENANCE

1. After every treatment, please use neutral reagent to clear the dust, stains on leather or the plastic cover. This is to prevent premature aging of the leather and plastic cover. After every treatment, please only use neutral solution to clear the leather. Disinfecting solution like alcohol, acid or alkaline solution are forbidden.
2. Please lubricate the moving parts regularly (once a year).

CIRCUIT SYSTEM CONNECTION DIAGRAM

TROUBLESHOOTING

1. The power cord is unconnected or not plugged well.
2. Poor quality of the hand controller or foot controller.
3. Poor quality of the button panel
4. Poor quality of the control box.
5. Rapture of motor tail.
6. Motor was damaged.

|

1. Connect the power cord or plug it well.
2. Replace the hand controller or foot controller.
3. Please contact maintenance center or supplier for troubleshooting.

Audio system error|

1. Input/output connection error.
2. Audio control box error.
3. Poor quality of the audio speaker.

| 1. Double check the connection of 1 input/output.

2. Replace the defective parts.

3. If problem is still not solved, please contact maintenance center or supplier for troubleshooting.

Abnormal Sound|

1. The rotating parts are short of lubricating oil.
2. Rotating positions (such as hinge, POM sets) are short of lubricating oil.
3. Motor quality problems.

|

1. Add lubricating oil.
2. Add lubricating oil.
3. Replace the motor.

If problem is still not solved after above operation, please contact maintenance center or supplier to solve it.

Disposal: The product must not be disposed of along with other domestic waste. The users must dispose of this equipment by bringing  it to a specific recycling point for electric and electronic equipment.

GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.

Customer Support

 244 (28040 – 28041 – 28042)

Fabbricante / Manufacturer / Fabricant / Fabricante:
SILVERFOX CORPORATION LIMITED
No. 18, 1st TongLe Road, TangXia Town, Pengjiang District,
JiangMen City, GuangDong Province, China
Made in China

PROFESSIONAL MEDICAL PRODUCTS
2244 (28040 – 28041 – 28042)
Importato da / Imported by / Importé par / Importado por: Gima S.p.A.
Via Marconi, 1 – 20060 Gessate (MI) Italy
gima@gimaitaly.com – export@gimaitaly.com
www.gimaitaly.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>