Moki ANC G-2 Active Noise Cancelling Wireless Headphones Owner’s Manual

Moki ANC G-2 Active Noise Cancelling Wireless Headphones

Specifications

• Speaker dimension: 40 mm
• Impedance (speaker): 32 ohm +/-15% At 1KHZ
• Frequency: 20Hz-20KHz
• Cancellation Frequency: 20Hz-20KHz
• Sensitivity: 110dB+/-3dB at 1KHz
• Rechargeable Battery: 350mAH, Lithium polymer battery
• Playing Time: around 50 Hrs @ 70% volume
• Charging time: ~2 hours
• Working distance: 10 meters

Product Usage Instructions

Charging
Make sure to charge the headphones using the Type-C charge port. The battery charging LED indicator will show the charging status. It takes approximately 2 hours to fully charge the headphones.

Pairing
To pair the headphones with a Bluetooth-enabled device:

1. Press and hold the MFB for 5 seconds to enter Bluetooth pairing mode.
2. Select the headphones on your device’s Bluetooth settings to complete the pairing process.

Wired Mode
To use the headphones in wired mode:

1. Ensure the headphones are powered off.
2. Connect one end of the supplied 3.5mm audio cable to the AUX port on the headphones.
3. Connect the other end of the cable to the audio output port on your device.
4. Adjust the volume using the controls on your device.

Active Noise Cancellation Functions
The ANC feature minimizes external ambient sounds to enhance your audio experience. Press the ANC button to activate or deactivate this feature based on your preference.

Overview

1. POWER ON/OFF Multi-Function Button (MFB)
2. Battery charging LED indicator
3. Volume up/down/Skip track forward/back
4. ANC ON/OFF
5. Type-C charge port
6. Microphone
7. AUX port

Button Functions

• Play/Pause music: Press MFB
• Power ON: Press & hold MFB for 3 seconds Power OFF: Press & hold MFB for 5 seconds Bluetooth pairing: Press & hold MFB for 5 seconds Answer/End call: Press MFB
• Reject call: Press & hold MFB for 2 seconds Volume up: Press the + button
• Volume down: Press – button
• Skip track forward: Press and hold + button Skip trackback: Press and hold – button
• ANC ON/OFF: Press the ANC button
• Reset: Press and hold the – & + buttons for 5 seconds

Charging

• Please charge the headphones before first use.
• Connect the included charge cable to a USB port on a PC or USB charge adaptor (USB-A connector).
• Confirm orientation and connect the Type-C connector to the port on your headphones.
• The LED on the headphones will glow solid red indicating the headphones are charging.
• Depending on the power of the charge port used, the charge time will be approximately 2-4 hours.
• When the headphones are fully charged, the LED will turn off.
• Disconnect the charging cable.

Note: The headphones will not work if the charging cable is still connected.

Pairing

• You must pair the headphones with a Bluetooth-enabled device before they will function wirelessly. You only need to pair your headphones to each play device once.
• The headphones will automatically reconnect to each device when in wireless range. If two or more devices are available, the last device paired will be the reconnected device.
• When using a Bluetooth-enabled audio device, make sure the distance is within 10 meters. Certain environments may affect the working distance.

1. Turn on Bluetooth mode on your play device.
2. Press and hold the MFB button for approximately 5 seconds until the LED starts blinking red/blue.
3. Your headphones are now ready to be paired with your play device.
4. Search for “Moki ANC G-2” from the list of available devices in Bluetooth settings on your Play device.
5. Select “Moki ANC G-2” to pair the headphones with your play device.
6. When pairing is successful, the LED on your headphones will glow solid blue.
7. Adjust the volume on your play device to the desired level.

Note : If headphones do not pair with a new device within 90 seconds they will enter “Standby mode”.

Wired Mode

These headphones are supplied with a 3.5mm audio cable. This enables the headphones to be used when not using Bluetooth mode, or when the battery has been depleted. To enable wired mode, follow these steps:

1. Make sure the headphones are powered off.
2. Connect one end of the supplied 3.5mm audio cable to the aux port on the headphones.
3. Connect the other end of the 3.5mm cable to the 3.5mm audio output port on your audio source device.
4. On your audio source device, navigate to the audio settings and ensure that the output is set to the 3.5mm audio output.
5. Use the volume controls on your audio source device to adjust the volume.

Active Noise Cancellation Functions

• Press the ANC button to turn on noise rejection. This will be indicated when the LED glows solid green.
• Press the ANC button a second time for ambient sound to be turned on. The LED will slowly flash green.
• Press the ANC button a third time to turn off Noise rejection. The green LED will also turn off.

Active Noise Cancellation (ANC)

Active Noise Cancellation (ANC) is a feature designed to elevate your audio experience. ANC actively identifies and neutralizes external ambient sounds, allowing you to immerse yourself in your favorite music, podcast, or movie without interference from background noise. Whether in a bustling city or a noisy airplane, ANC enhances audio clarity while providing a tranquil listening environment to suit your needs.

Specifications

• Speaker dimension: 40 mm
• Impedance (speaker): 32 ohm +/-15% At 1KHZ
• Frequency: 20Hz-20KHz
• Cancellation Frequency: 20Hz-20KHz
• Sensitivity: 110dB+/-3dB at 1KHz
• Rechargeable Battery: 350mAH, Lithium polymer battery
• Playing Time: around 50 Hrs @ 70% volume
• Charging time: ~2 hours
• Working distance: 10 meters

Care & Disposal
To prevent the possibility of the battery from leaking, heating, or catching fire, please follow these precautions:

Warnings

• Please use a supplied audio cable to charge the headphones.
• Please disconnect the audio cable after the headphones are fully charged.
• Do not continue to charge headphones after they are fully charged.
• Do not use or leave the headphones near a heat source such as a fire or a heater.
• Do not place headphones in any liquid, fire, or on a heater.
• Do not hit or throw the headphones.

Cautions

• Do not use or leave headphones in very high temperatures (ie. in direct sunlight or a vehicle in extremely hot conditions).
• Do not use headphones where there is a lot of static electricity, otherwise, the safety devices within the headphones can be damaged.
• The headphones should be stored at room temperature.
• The headphone’s battery should be charged and discharged every so often to activate and restore the battery’s energy.
• Please follow battery waste recycling guidelines when disposing

E-waste
This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled according to the European Directiv\e 2002/96/EC to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Should you need to dispose of this product, please note that electrical products should not be disposed of with household waste.

Please dispose of the product thoughtfully. of

visit moki.au

FAQ

How long does the battery last?
The headphones provide around 50 hours of playing time at 70%volume.

How far is the working distance for Bluetooth connectivity?
The headphones have a working distance of up to 10 meters for Bluetooth connectivity.

Can I use the headphones without Bluetooth?
Yes, you can use the headphones in wired mode by connecting them to your audio source device using the supplied 3.5mm audio cable.

References

• Moki | Tech products made for the whole family – Moki International

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>