Moki Navigator Wireless Volume Limited ANC Headphones Instruction Manual
- September 4, 2024
- Moki
Table of Contents
Navigator Wireless Volume Limited ANC Headphones
“`html
Product Information
Specifications:
- Speaker dimension: 40 mm
- Impedance (speaker): 32 ohm +/-15% at 1KHZ
- Frequency: 20Hz-20KHz
- Sensitivity: 89dB+/-3dB at 1KHz
- Rechargeable Battery: 350mAH, Lithium polymer battery
- Playing Time: around 27 Hrs @ 70% volume
- Charging time: ~2 hours
- Working distance: 10 meters
Product Usage Instructions
Charging:
To charge the headphones, use the Micro-USB charge port and
connect the charging cable to a power source.
Pairing:
Before using the headphones wirelessly, pair them with a
Bluetooth enabled device by following the instructions provided in
the manual.
Wireless Mode:
Ensure the headphones are powered on and Bluetooth is enabled on
your device. Follow the pairing instructions to connect the
headphones to your device wirelessly.
Wired Mode:
-
Power off the headphones.
-
Connect one end of the supplied 3.5mm audio cable to the aux
port on the headphones. -
Connect the other end of the cable to the audio output port on
your device. -
Adjust the audio output settings on your device to use the
3.5mm audio output. -
Control volume using your device’s volume controls.
Airplane Use (with adaptor):
For airplane use, connect the headphones to the airline adaptor
using the 3.5mm audio cable provided. Then connect the adaptor to
the airplane port.
Active Noise Cancellation (ANC):
ANC feature helps reduce external ambient noise for an enhanced
audio experience. Toggle ANC on/off using the ANC button.
Frequently Asked Questions (FAQ)
How do I reset the headphones?
To reset, press and hold the volume up and volume down buttons
simultaneously for 5 seconds.
What is the range for wireless connectivity?
The headphones have a working distance of up to 10 meters for
Bluetooth connectivity.
“`
Overview
1. POWER ON/OFF Multi Function Button (MFB) 2. ANC ON/OFF 3. Volume up/Skip
track forward 4. Volume down/Skip track back 5. Micro-USB charge port 6.
Battery charging indicator LED 7. AUX port
Button Functions
Play/Pause music: Press MFB Power ON: Press & hold MFB for 1 seconds Power
OFF: Press & hold MFB for 3 seconds Bluetooth pairing: Press & hold MFB for 3
seconds when OFF Answer/End call: Press MFB Reject call: Press & hold MFB for
2 seconds Volume up: Press + button Volume down: Press – button Skip track
forward: Press and hold + button Skip track back: Press and hold – button ANC
ON/OFF: Slide ANC button Reset: Press and hold – & + buttons for 5 seconds
Navigator
Wireless Volume Limited ANC Headphones
Contents
· 1 x Moki Navigator Wireless Volume Limited ANC Headphones · 1 x Micro-USB to
USB-A Charge Cable · 3.5mm to 3.5mm Audio Cable · Two-Pin Airline adaptor
Charging
· Please charge headphones before first use. · Connect the included charge
cable to a USB port on a PC or USB charge adaptor (USB-A connector). · Confirm
orientation and connect the Micro-USB connector to the port on your
headphones. · The LED on the headphones will glow solid red indicating the
headphones are charging. · Depending on the power of the charge port used, the
charge time will be approximately 2-4 hours. · When the headphones are fully
charged, the LED will turn off. · Disconnect the charge cable. Note: The
headphones will not work if the charge cable is still connected.
Pairing
You must pair the headphones with a Bluetooth enabled device before they will
function wirelessly. You only need to pair your headphones to each play device
once. The headphones will automatically reconnect to each device when in
wireless range. If two or more devices are available, the last device paired
will be the reconnected device. When using a Bluetooth enabled audio device,
make sure the distance is within 10 meters. Certain environments may affect
the working distance.
1. Turn on Bluetooth mode on your play device. 2. Press and hold the MFB
button for approximately 5 seconds until the LED starts blinking red/blue. 3.
Your headphones are now ready to be paired with your play device. 4. Search
for “Moki Navigator” from the list of available devices in Bluetooth settings
on your play device. 5. Select “Moki Navigator” to pair the headphones with
your play device. 6. When pairing is successful, the LED on your headphones
will glow solid blue. 7. Adjust the volume on your play device to the desired
level.
Note: If headphones do not pair with a new device within 90 seconds they will
enter “Standby mode”.
Wired Mode
These headphones are supplied with a 3.5mm audio cable. This enables the
headphones to be used when not using Bluetooth mode, or when the battery has
been depleted. To enabled wired mode, follow these steps:
1. Make sure the headphones are powered off. 2. Connect one end of the
supplied 3.5mm audio cable to the aux port on the
headphones. 3. Connect the other end of the 3.5mm cable to the 3.5mm audio
output port on
your audio source device. 4. On your audio source device, navigate to the
audio settings and ensure that
the output is set to the 3.5mm audio output. 5. Use the volume controls on
your audio source device to adjust volume.
Airplane Use (with adaptor)
Connect the included 3.5mm audio cable to the 3.5mm headphone jack on the
headphones – refer to headphone diagram for location. Connect the other end of
the audio cable to the included airline adaptor. You can now connect the two-
pin airline adaptor to the two-pin airplane port.
Active Noise Cancellation (ANC)
Active Noise Cancellation (ANC) is a feature designed to elevate your audio
experience. ANC actively identifies and neutralizes external ambient sounds,
allowing you to immerse yourself in your favourite music, podcast or movie
without interference from background noise.
Whether in a bustling city or a noisy airplane, ANC enhances audio clarity
while providing a tranquil listening environment to suit your needs.
Specifications
Speaker dimension: 40 mm Impedance (speaker): 32 ohm +/-15% At 1KHZ Frequency:
20Hz-20KHz Sensitivity: 89dB+/-3dB at 1KHz Rechargeable Battery: 350mAH,
Lithium polymer battery Playing Time: around 27 Hrs @ 70% volume Charging
time: ~2 hours Working distance: 10 meters
Care & Disposal
To prevent the possibility of the battery from leaking, heating or catching
fire, please follow these precautions:
Warnings
· Please use supplied audio cable to charge headphones. · Please disconnect
audio cable after headphones are fully charged. · Do not continue to charge
headphones after they are fully charged. · Do not use or leave the headphones
near a heat source such as a fire or a heater. · Do not place headphones in
any liquid, fire or on a heater. · Do not hit or throw the headphones.
Cautions
· Do not use or leave headphones in very hightemperatures (ie. in direct
sunlight or in a vehicle in extremely hot conditions).
· Do not use headphones where there is a lot of static electricity, otherwise
the safety devices within the headphones can be damaged.
· The headphones should be stored at room temperature. · The headphone’s
battery should be charged and discharged every so often
in order to activate and restore the battery’s energy. · Please follow battery
waste recycling guidelines when disposing
E-waste
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE). This means that this product must be handled
according to the European Directive 2002/96/EC in order to be recycled or
dismantled to minimize its impact on the environment. For further information,
please contact your local or regional authorities. Should you need to dispose
of this product, please note that electrical products should not be disposed
of with household waste.
Please dispose of product thoughtfully.
visit moki.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>