MOKi 338987 Navigator Noise Cancelling Wireless Over-Ear Headphones User Guide
- June 5, 2024
- Moki
Table of Contents
MOKi 338987 Navigator Noise Cancelling Wireless Over-Ear Headphones User
Guide
HEADPHONES OVERVIEW
CONTROL PANEL
- When OFF
Hold 1 sec: Power ON
Hold 3 secs: Enter
pairing mode
Activates noise cancellation
**
- When ON
Tap: Play/Pause
Double tap: Redial last # called
Hold 3 secs: Power OFF
Tap: Decrease volume
Hold 2 secs: Restart track
Hold again: Previous track
Tap: Increase volume
Hold 2 secs: Next track
OVERVIEW
Moki Navigators Headphones are designed to keep you and your little ones happy while travelling the globe or popping down the street. With a volume limit of 89dB you can relax with the knowledge that they won’t be causing themselves permanent hearing damage by listening at volumes considered too hight for too long.
The noise cancellation feature in Moki Navigators has been specifically tuned to be most useful for children, whether it be blocking the low frequency noise from aircraft engines or the drone of car tyres from the backseat when travelling city streets. Moki Navigators Bare rechargeable via USB, so there is no need to buy batteries. The included 3.5mm cable allows use with audio devices without Bluetooth, such as aircraft entertainment systems. Combine those features with great sound and an extended playtime of over 50 hours and you have the safest, most appropriate headphones for kids every made. Ideal for use by young frequent travelers or anyone who might use headphones in traditionally noisy environments and wish to protect their hearing.
Power-efficient Bluetooth V4.1 and Active Noise Cancellation (ANC) processing dampens the influence of ambient low frequency noice by -14dB. Quality 40mm neodymium drivers extend all audible frequencies to produce a richly detailed sound stage. Oversize soft padded earcups help with noise reduction through passive isolation, and ensures Moki Navigator Headphones will comfortably last the distance on extended trips with minimal hearing fatigue. Supplied with a 3.5mm audio cable and dual-pin adaptor for use with in-flight systems + a lightweight Moki Drawstring Bag to help keep everything together.
CHARGING
Please charge headphones before first use. Connect the included charge cable to a USB port on a PC or USB charge adaptor. Confirm orientation and connect the microUSB to the port on the headphones.
The LED on the headphones will glow solid RED indicating the headphones are charging. Depending on the power of the charge port used, charge time will be around 2-3 hours.
The red LED will turn off when the headphones are fully VBcharged. The charge
cable can then be disconnected.
Note: Headphones will not operate if the charge cable is still
connnected.
FOR USE ON AIRPLANE
- Connect the included 3.5mm audio cable to the 3.5mm headphone jack on the headphones (see Speaker Overview).
- Connect the other end of the audio cable to the Bincluded airline adaptor. You can now connect the VBtwo-pin airline adaptor to the two-pin airplane port.
BLUETOOTH PAIRING
you must pair your Moki Navigator Headphones with a Bluetooth device before it can be used wirelessly
- Turn on Bluetooth mode on your mobile phone or play device.
- The play device should automatically start searching for the headphones. Some players may require you to select “search for / add new device”.
- With the headphones off, hold the button for approximately 8 seconds, until the LED starts blinking red/blue indicating the headphones are searching for a new Bluetooth device.
- On your phone or play device under “Bluetooth” you will see “Moki Navigator” listed under “Available devices”.
- Select “Moki Navigator” on your device to pair your headphones. No code will be required. If your device requires a code, use “0000”.
- When pairing is successful the LED on your headphones will slowly blink blue.
Note: If headphones do not pair with a new device within 90 seconds they will enter “Standby mode”. Moki Navigator Headphones may be paired to PCs and laptops with Bluetooth capability. Go to your computer’s Bluetooth settings and follow the prompts to connect in a similar way as described above.
After pairing, ensure the “Sound Output” is set to “Play through Bluetooth” (not “Internal Speakers”). Some computers may require Bluetooth audio Boutput to be enabled each time you connect.
BATTERY HEALTH
To prevent the possibility of the battery from leaking, heating or catching fire, please follow these precautions:
Warnings
- Please use supplied USB charging cable to charge speaker.
- Please disconnect charge cable after speaker is fully charged.
- Do not continue to charge speaker after it is fully charged.
- Do not use or leave the speaker near a heat source such as a fire or a heater.
- Do not place speaker in any liquid, fire or on a heater.
- Do not hit or throw the speaker.
Cautions
- (ie. in direct sunlight or in a vehicle in extremely hot conditions)
- Do not use speaker where there is a lot of static electricity, otherwise the safety devices within the speaker can be damaged.
- The speaker should be stored at room temperature.
- The speaker battery should be charged and discharged every so often in order to activate and restore the battery’s energy.
- Please follow battery waste recycling guidelines when disposing of the speaker
E-WASTE
This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).
This means that this product must be handled according to the European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities.
Should you need to dispose of this product, please note that electrical products should not be disposed of with household waste. Please dispose of speaker thoughtfully.
SCAN THIS CODE
Visit our website for more information about this, and many other great products.
SCAN THIS CODE
Visit our website for more information about this, and many other great products.
