Eastbrook S-216 Shower Enclosure Installation Guide
- September 3, 2024
- Eastbrook
Table of Contents
S-216 Shower Enclosure
“`html
Product Specifications
- Tools Required:
- Pencil
- 63.2 bit drill
- Silicone gun
- Flat and cross screwdriver
- Tap measure
- Level ruler
- Drill machine
- Spanner
- Rubber hammer
Product Usage Instructions
-
Prepare the tools listed above for installation.
-
Refer to the list of spare parts and ensure all parts are
available. -
Follow the product schematic diagram for assembly.
-
When cleaning and maintaining the shower enclosure:
-
Avoid using irritant detergents like alcohol or bleach; use
warm soapy water instead. -
If there is notable noise when the glass door moves, apply a
small quantity of lubricant to the roller wheel, slipping hook, and
track. -
Ensure silicone sealant is applied on the outside only.
FAQ (Frequently Asked Questions)
Q: Can I use chemical cleaners to clean the shower
enclosure?
A: No, it is recommended to only clean with
warm soapy water to avoid damaging the materials.
Q: What should I do if there is noise when the glass
door moves?
A: Apply a small quantity of lubricant onto the
roller wheel, slipping hook, and track to reduce noise.
Q: Where should I apply silicone sealant?
A: Silicone sealant should be applied on the
outside only to ensure proper sealing.
For further assistance, contact our helpline at 01452
317890.
“`
INSTALLATION MANUAL
TOOLS REQUIRE
c
Pencil
( 63. 2) bi t dr i l l
Silicone gun
Flat and cross screwdriver
Tap measure
Level ruler
Drill machine
Spanner
Rubber hammer
LIST OF SPARE PARTS
A X1
B X1
C X1
D X1
E X1
X1
F
(L) (R)
X2
G
H X1
I X1
(L) (R)
J
(L) (R)
X2
K
(L) (R)
X2
L
(L) (R)
X2
M
X1
N
X2
O
X8
P
X8
Q
X8
ST4*30
R
X8
ST4*12
S
ST3*20
X1
T
ST4*20
X1
U
PRODUCT SCHEMATIC DIAGRAM
T L
1
2
3
6mm
4
Q
(1)
5
6
R
7
(2)
9
10
11
M
13
U
3
M
12
K
2
L
3.2mm
K
2
2.5mm
3
(3)
14
P
S
3.2
15
17
G
H N
16
J
I
(4)
18
(5)
(6)
Cleaning & Maintenance
Don’t clean the shower enclosure with irritant detergent such as alcohol,
bleach or other chemical cleaners. Only clean with warm soapy water. After the
installation is completed, should you find that there is notable noise when
the glass door moves, you may add a small quantity of lubricant onto the
roller wheel, slipping hook and the track.
Helpline: 01452 317890
Please ensure silicone sealant is on the outside only.
S-216
(7)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>