PLT SOLUTIONS PLT-20283 Color Wattage Selectable UFO LED High Bay Instruction Manual
- June 9, 2024
- PLT SOLUTIONS
Table of Contents
PLT-20283 Color Wattage Selectable UFO LED High Bay
Instruction Manual
COLOR/WATTAGE
SELECTABLE UFO LED HIGH BAY
SAFETY AND INSTALLATION INSTRUCTIONS
⚠ WARNING
- Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
- To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards, read all warnings and instructions included with and on the fixture box and all fixture labels.
- Proper grounding is required to ensure safety.
- Power must be turned off at the breaker before installation or maintenance.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Wear gloves and eye protection at all times while installing, servicing, or performing maintenance on the luminaire, and avoid direct eye exposure to the light source while it is on.
- Do not install damaged product. Inspect luminaire for damage that may have occurred during transit. If damaged, contact the manufacturer immediately.
- These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to meet in connection with installation, operation, or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s or owner’s purposes, contact the manufacturer.
CAUTION
- Carefully observe the grounding procedure in the installation section.
- Tighten all fixture components to their recommended torque values.
Installation
Chain Mounting
- Attach the loop in the luminaire and tighten the locking screw.
- Attach the luminaire to the chain.
- Attach the safety cable to the fixture.
- Connect the wires.
Conduit Mounting
- Attach the luminaire and tighten the conduit with locking screw.
- Attach the safety cable to the fixture.
- Connect the wires.
Wattage & CTT Sele ctable Guidance
Wiring Diagram
972-535-0926
pltsolutions.com
ver 121422
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>