MOZA M16 3 Axis Handheld Smartphone Gimbal Stabilizer User Manual

User Manual

Mini MX Overview

Note: Please activate MOZA Mini MX with MOZA Genie App before the first use. Otherwise, normal working functions may be limited.

Download APP

You can scan the QR code to download the “MOZA Genie” directly, or you can search the “MOZA Genie” in the APP store & Google Play to download it.(scan the QR code below to download the APP)

http://global.backend.gudsen.vip/api/app/download?p=M16

1. The customized “MOZA Genie” APP for Mini MX can help you make better use of the various functions of the gimbal.
2. Please routinely check for the latest version of the MOZA Genie app. Make sure you have set to automatic update on your mobile smartphone.

Mounting and Balancing

Folded Status

Unlock the gimbal as shown in the illustration Place the mobile phone in the phone holder with its camera facing outwards. Adjust the phone holder to keep the phone leveled in a natural state.

Charging

1. The MOZA Mini MX has a built-in lithium battery. Before first use, fully charge it to condition the battery to ensure smooth operation.
2. When the power indicator starts flashing, the battery level is less than 20%. Please charge it in time.
3. With a universal Type-C port, Mini MX can be charged by both phone charger and power bank.
4. The battery will automatically stop charging when it gets fully charged. The blue indicator light will turn off. Please disconnect the charger.

Battery Level Indicators

• All blue LEDs on: 70%-100% battery level
• Two blue LEDs on: 40%-70% battery level
• One blue LED on: 20%-40% battery level
• Blinking: below 20% battery level
• Blue light blinks: Charging
• Blue light off: Charging completed

Connecting to the MOZA Genie App

Refer to the illustration on page P2，installing the phone and balancing the gimbal. Long press the function button for 3s to power on the gimbal,  turn on the Bluetooth of the phone, launch the MOZA Genie App. Click the Bluetooth icon in the main interface of MOZA Genie App to search for connectable devices, select the device with the connection prefix as Mini MX. After a successful connection, the gimbal will automatically enter the shooting interface.

Mini MX Activation

Enter the APP main interface to select the gimbal to be connected, the activation prompt box will pop up, click Activate. After the activation is completed, the gimbal will work normally. If activation fails, please try to reactivate, if it fails again, please follow the prompts to contact customer service.

Button function (MOZA Genie App Control) Fn button

Long press: on/off
Power on and enter standby mode
(phone not clipped/unlocked)
Single press: shutter; record/stop
Wake up (gimbal in standby mode)
Double press: switch to video mode/photo mode
Triple press: Horizontal and vertical mode switching

Joystick
Move upwards: phone camera goes up
Move downwards: phone camera goes down
Move leftwards: phone camera goes left

Move rightwards: phone camera goes right
Inception mode: Move leftwards, roll axis rotates counterclockwise Move rightwards, roll axis rotates  clockwise

Zoom +
Click and hold: Zoom in
Single press: Pan-tilt follow
Double click: Automatically zoom in to maximum

Zoom –
Press and hold: Zoom out
Single press： FPV Mode
Double click: Automatically zoom out to a minimum
Inception Mode: Push the joystick left and right in FPV mode to control the rotation direction

Smart Trigger
Click and hold: All Lock Mode
Double click and hold: Sports Gear Mode Click: Follow the center of the shot intelligently
Double click: Re-center and exit the current mode
Triple Click: Switch between the rear and front-facing camera

Note: Mini MX is able to use your smartphone’s original camera to take photos, record/stop. However, featured modes of the above functions cannot be controlled without the app. It is recommended to use the MOZA Genie App. When connected to the app, a notification will appear to let you know which model was switched to.

Firmware upgrade
Hold the ZOOM- button then click the Fn button at the same time, the indicator flashes from top to bottom. Then the stabilizer enters, the stabilizer enters the firmware upgrade mode, connects the APP, and clicks firmware upgrade.

Bluetooth reset
When you cannot search for Mini MX Bluetooth on your phone, please power on the gimbal, hold + button, then press the power button at the same time until the power indicator flashes. Then the Bluetooth reset is successful.

Folded:14550180
Supported Phone| Width:60 – 88mm
Weight:143-280g
Battery Life| 24 h(Reference battery life under

test with gimbal well balanced.)

Battery Specs| Working voltage: 7.4V
Battery capacity: 2000mAh
Charging Time| 2.5-Hours
Mechanical Range| Pan: 340°
Roll: 300°
Tilt: 140°

FAQ

1. Why does my gimbal automatically enter sleep mode after a short while of usage?| 1. Make sure you’ve installed your phone, and check whether the mobile phone is well balanced. Serious unbalance will cause motor overload and going to sleep to protect it.
2. Please have a check whether the indicator flashes quickly, if it does, it means a low battery and the gimbal can not work.
---|---
2. Does the gimbal support fast charging?| Fast charging is not supported, the charging specification is 5V/2A
3. What can I do if there is a delay in the movement and video in my App?| 1. Check whether the anti-shake function is turned on in the App, if it is, please turn off the anti-shake function.
2. If the delay still exists after you turned off the anti-shake function, please uninstall the App and download it again. If the problem still exists, please contact our after-sale service.
4. What should I do if  × appears after I  opened the App and searched Bluetooth?| The close Bluetooth search box in the MOZA genie app, then re-open the search box and search again the Bluetooth device, try to connect again.
5. What should I do if the Object Tracking fails?| 1. Please try to select a target of a suitable size in a single background environment. the screen and be clearly visible without any foreground objects.
2. If it still doesn’t work, please try to upgrade the App and gimbal firmware.
6. What is Magic Mode?| 1. The Magic Mode in MOZA Genie App provides some cool short clips filming templates, you can easily shoot several clips by following the templates.
2. The Magic Mode guide you to record and film from three aspects including “camera movement”, “transition”, “sound effect” to achieve  “one step filming”.
3. You just need to hold a button to start shooting, the gimbal will automatically move according to the scene’s requirements, and some may provide tips to users on following the camera movement.
7. What should I do if the indicator light is not on and I can’t turn the gimbal on due to upgrade failure?| When upgrade failure happens, please force your gimbal to enter firmware upgrade mode (also called boot mode, hold zoom- button then press fn button) and upgrade the firmware again.
8. How to operate the Inception Mode?| 1. Press Zoom- to switch to FPV Mode
2. Move the joystick left and right to proceed with the operation for Inception Mode.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>