NGP 122SS Silicone Perimeter Seals Instructions

July 26, 2024
NGP

NGP 122SS Silicone Perimeter Seals

Product Specifications :

  • Material: Neoprene or Silicone
  • Application: Perimeter Seals
  • Fire Rating: Up to 3 hours for hollow-metal-type fire doors, up to 1.5 hours for wood-type fire doors
  • Category: Smoke and Draft Control gasketing (Category H)
  • Tested Standards: UL 1784, NFPA 105, IBC

Product Usage Instructions

Installation Instructions:

  1. Cut the seal to fit the door.
  2. With the door closed, position the seal and mark screw holes.
  3. Drill pilot holes for screws using a 7/64 drill bit.
  4. Install with screws provided in all mounting holes, working from one end to the other.
  5. Adjust the position so that the gasket is slightly compressed against the door but does not impede proper closing and latching.

WARNING: Do not drill through the gasketing material as the drill bit will damage the material.
Positive Pressure Tested Gasketing Materials for Fire Doors: Suitable for hollow-metal-type fire doors rated up to 3 hours and wood-type fire doors rated up to 1.5 hours. Category H gasketing materials have been tested to UL 1784 standards and meet the requirements of NFPA 105 and IBC for use on S label doors
Contact us at 800-647-7874 or visit ngp.com for more information.

Frequently Asked Questions (FAQ):

  • Q: Are Neoprene products safe to use despite the warning about chemicals?
    A: Neoprene products can be safely used if proper precautions are taken. Ensure ventilation when working with Neoprene products and follow recommended safety guidelines.

  • Q: Can these perimeter seals be used on all types of doors?
    A: The perimeter seals are designed for use on hollow-metal-type fire doors rated up to 3 hours and wood-type fire doors rated up to 1.5 hours. Ensure compatibility before installation.

Neoprene or Silicone Perimeter Seals

  • WARNING: Neoprene products can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer and/or developmental and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Installation Instructions

  1. Cut seal to fit.
  2. With door closed, position seal, Mark screw holes.
  3. Drill pilot holes for screws using a 7/64″ drill bit.
  4. Install with screws provided in all mounting holes, working from one end to the other.
  5. Adjust position so that gasket is slightly compressed against door but does not impede proper closing and latching.

APPLICATION WARNING:
DO NOT DRILL THROUGH GASKETING MATERIAL. DRILL BIT WILL DAMAGE MATERIAL.

POSITIVE PRESSURE TESTED GASKETING MATERIALS FOR FIRE DOORS FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS RATED UP TO 3 HOURS AND WOOD-TYPE FIRE DOORS

  • RATED UP TO 1 1/2 HOURS.
  • CATEGORY H
  • Smoke and Draft Control gasketing (Category H) tested to UL 1784; meets requirements of NFPA 105, IBC for use on “S” label doors. 12.21
  • 800-647-7874
  • ngp.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals