NGP Aluminum Rain Drip Guard Instructions

July 26, 2024
NGP

17

Aluminum Rain Drip Guard

  • Aluminum Alloy 6063, T5 Temper
  • ¾” Wide X 1 ½” Tall
  • 6 X ¾” Stainless Steel SMS Furnished

  • Screw Holes Slotted For Adjustment

SEAL

ngp.com
1-800-NGP-RUSH

FAX:
800-255-7874
QUOTES:
quotes@ngp.com

INSTALLATION INSTRUCTIONS

Typical installation is to exterior face of frame header. Can also be applied to exterior face of door at sill.
Length of Rain Drip Guard should extend beyond width of door. Install full width of frame header if possible.

  1. Mark hole locations.
  2. Drill pilot holes for screws using a 7/64″ bit.
  3. Fasten screws, working from one end to the other.
  4. Caulk top edge of drip strip and around each screw to prevent water penetration.

ngp.com
1-800-NGP-RUSH

MEMPHIS
4985 East Raines Road
Memphis, TN 38118
CARSON CITY
3689 Arrowhead Drive
Carson City, NV 89706

quotes@ngp.com
orders@ngp.com

10.23

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals