NGP 170NA Neoprene or Silicone Perimeter Seals Instructions
- September 3, 2024
- NGP
Table of Contents
170NA Neoprene or Silicone Perimeter Seals
“`html
Specifications:
-
Material: Neoprene or Silicone
-
Application: Perimeter Seals
-
Fire Rating: Up to 3 hours for hollow-metal-type fire doors and
up to 1.5 hours for wood-type fire doors -
Category: H – Smoke and Draft Control gasketing
-
Testing Standards: UL 1784, NFPA 105, IBC
Product Usage Instructions:
-
Cut Seal to Fit: Measure and cut the seal
according to the dimensions of the door. -
Position and Mark Holes: Close the door and
position the seal. Mark screw holes on the door frame. -
Drill Pilot Holes: Use a 7/64 drill bit to
drill pilot holes for screws at the marked locations. -
Install Seal: Secure the seal using screws
provided, starting from one end and moving towards the other. -
Adjust Position: Ensure the gasket is slightly
compressed against the door but does not hinder proper closing and
latching.
FAQ:
Q: Can Neoprene products be harmful?
A: Neoprene products can expose you to chemicals like chloroprene, which is known to cause cancer and reproductive harm.
Take necessary precautions and refer to www.P65Warnings.ca.gov for
more information.
Q: What doors are suitable for this perimeter seal?
A: The seal is suitable for hollow-metal-type fire doors rated up to 3 hours and wood-type fire doors rated up to 1.5 hours. It
meets Category H standards for smoke and draft control
gasketing.
Q: What standards does the product meet?
A: The product is tested to UL 1784 standards and meets requirements of NFPA 105, IBC for use on S label doors.
Q: What caution should be taken during installation?
A: Avoid drilling through the gasketing material as it may damage the material. Follow the provided installation instructions
carefully.
“`
Neoprene or Silicone Perimeter Seals
WARNING: Neoprene products can expose you to chemicals including chloroprene,
which is known to the State of California to cause cancer and/or developmental
and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
ADVERTENCIA: Productos de neopreno pueden exponerlo a productos químicos
incluyendo cloropreno, que el estado de California considera causante de
cáncer. Para mayor información visite la página www. P65Warnings.ca.gov.
Installation Instructions
1. Cut seal to fit. 2. With door closed, position seal, Mark screw holes. 3.
Drill pilot holes for screws using a 7/64″ drill bit. 4. Install with screws
provided in all mounting holes, working from one end to the other. 5. Adjust
position so that gasket is slightly compressed against door but does not
impede proper closing and
latching.
APPLICATION WARNING: DO NOT DRILL THROUGH GASKETING MATERIAL.
DRILL BIT WILL DAMAGE MATERIAL.
Instrucciones de Instalación
1. Corte el sello a la medida. 2. Con la puerta cerrada, coloque el sello.
Marque los orificios para los tornillos. 3. Taladre orificios guía para los
tornillos usando una broca de 7/64″. 4. Instale con los tornillos
suministrados en todos los orificios de montaje, procediendo de un extremo a
otro. 5. Ajuste la posición del empaque para que quede ligeramente comprimido
contra la puerta sin que impida
cerrar y correr debidamente el pasador.
PRECAUCIÓN AL INSTALAR: NO TALADRE A TRAVÉS DEL EMPAQUE.
LA BROCA DAÑARÁ EL MATERIAL.
POSITIVE PRESSURE TESTED GASKETING MATERIALS FOR FIRE DOORS FOR APPLICATION TO
HOLLOW-METAL-TYPE FIRE DOORS RATED UP TO 3 HOURS AND WOOD-TYPE FIRE DOORS
RATED UP TO 11/2 HOURS. CATEGORY H
Smoke and Draft Control gasketing (Category H) tested to UL 1784; meets
requirements of NFPA 105, IBC for use on “S” label doors.
12.21
MATERIAL DE EMPAQUE PARA PUERTAS CORTAFUEGO SOMETIDOS A PRUEBAS DE PRESION
POSITIVA, PARA USARSE EN PUERTAS METALICAS HUECAS CORTAFUEGO, CERTIFICADAS
HASTA 3 HORAS Y PUERTAS DE MADERA CORTAFUEGO, CERTIFICADAS HASTA 11/2 HORAS
CATEGORÍA H
Empaques Para Control de Humo y Corrientes de aire (Categoría H) probados de
acuerdo a UL 1784; cumple con los requisitos de NFPA 105, IBC para usarse en
puertas etiquetadas “S”.
800-647-7874
ngp.com