FUNPOWER FT0314HDM Remote Control Transmitter Instruction Manual

FUNPOWER FT0314HDM Remote Control Transmitter

Product Information

Product Specifications

• Model: FT0314HDM Remote Control Transmitter
• Battery: 2 x 1.5V AAA batteries
• FCC ID: 2ABUP-FT031XHDM
• IC Caution: IC25540-FT031XHDM

Product Usage Instructions

1. LED Indicator and Fan Control
   To turn the fan on/off, control the speed, and activate breeze mode, use the following buttons:

   • LED Indicator: Displays fan status and gear level.
   • Speed Control: Adjust fan speed from level 1 to 6 using the + and – keys.
   • Breeze Mode: Automatically cycles fan speed between 2 to 4 for a natural breeze effect.

2. Lighting Control
   Control the lighting features with the following options:

   • Lighting Power: Turn the lighting on/off.
   • Brightness Control: Adjust brightness using the + and – keys.
   • Color Temperature Adjust: Change the color temperature of the light.

3. Timer and Direction Control
   Set timer functions and adjust fan direction with the following options:

   • Fan Timing Control: Set timers for 2, 4, or 8 hours. Cancel timers with + or – keys.
   • Fan Direction: Control fan direction for summer or winter use.

4. Battery Installation
   Ensure proper installation of 2 AAA batteries in the transmitter.

Use Precautions

1. If the LED indicator does not turn on when pressing a key, check battery installation.
2. If the LED indicator flashes when pressing a key, replace the batteries due to low voltage.
3. Remove batteries from the transmitter when not in use for an extended period.

Frequently Asked Questions (FAQ)

• Q: How do I know if the battery is running low?
  A: The LED indicator will flash when the battery has low voltage, indicating it’s time to replace it.

• Q: Can I set a timer for the fan to turn off automatically?
  A: Yes, you can set timers for 2, 4, or 8 hours using the fan timing control function.

Operation Instructions

1. LED indicator

   • Gear display.
   • Another key function is effective indication.

2. OFF the Fan and lighting

3. ON/OFF the Fan

   • When the fan shuts down, press this button, and the fan runs at the speed before the fan shuts down.
   • When the fan is on, press this button, and the fan shuts down.

4. Speed of the fan (1~6 level)

   • The “+” key increases the fan gear. The higher the gear, the higher the fan speed.
   • The “-” key lowers the fan gear, and the lower the gear, the lower the fan speed.
   • The number of indicators displayed corresponds to the current fan gear.
   • The lowest gear is 1st gear and the highest gear is 6th gear.

5. ON/OFF the Lighting

   • When the light is off, press this button to turn it on.
   • When the light is on, press this button to turn it off.

6. Brightness control

   • The “+” key increases brightness.
   • The “-” key lowers brightness.

7. Breeze Mode:
   Between Speed 2 to Speed 4, at 40 seconds in a curve and circle speed. Reach one specific speed, it changes to another speed.

8. Color temp adjust:
   Press this button to change the color temperature of the light.

9. Fan timing control
   Set up the timer at 2 hours, 4 hours, 6 hours.

   • 2H press this key, and the fan will stop after 2 hours.
   • 4H press this key, and the fan will stop after 4 hours.
   • 8H press this key, and the fan will stop after 8 hours.
   • The timing function of the key works when the fan is running.
   • Press the key “+” or”-” will cancel the timer.
   • The latest timer will take place the previous one.
   • The number of LED lights corresponds to the number of hours when the fan is shut down.

10. Direction of the fan

    • Press the key to control the direction of the fan to make the wind blow on the ground. It is usually used in summer. Press and hold this key for 5 seconds to turn on this function. At the same time, the LED lights will display from bottom to top in order. Finally, all the indicators will turn on and off.
    • Press the key to control the direction of the fan, so that the wind blows upward from the ceiling. It is usually used in winter. Press and hold this key for 5 seconds to turn on this function. At the same time, the LED lights will be displayed in order from top to bottom. Finally, all the indicators will turn on and off.

Use Precautions

1. When press the key of the transmitter, the LED indicator doesn’t on, please inspect the battery installation.
2. When press the key of the transmitter, the LED indicator flashes, which means the battery has low voltage, please replace a new one.
3. Please pull out the battery from the transmitter when left unused for a long time.

FCC Instructions

This product has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• Connect the product to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• this device may not cause harmful interference, and
• this device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.

• FCC ID: 2ABUP-FT031XHDM

IC Caution
RSS-Gen Issue 5 “&” RSS-Gen numéro 5

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic

Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF exposure statement:
The equipment complies with the IC Radiation exposure limit set forth for uncontrolled environments.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>