BEHRINGER HD300 Heavy Distortion User Manual
- June 17, 2024
- Behringer
Table of Contents
BEHRINGER HD300 Heavy Distortion
Thank you for showing your confidence in us by purchasing the BEHRINGER HEAVY DISTORTION HD300. This high-quality effects pedal enables you to produce super thick, tube-like distortion plus endless sustain. Thanks to its high- performance features you can achieve the typical hard rock or heavy metal distortion sounds when playing over a clean amp channel.
Controls
- The LEVEL control adjusts the output level.
- The TONE control allows you to shape your overall sound.
- The BOTTOM control allows you to boost/cut the low-frequency range.
- The DIST(ortion) control adjusts the amount of distortion.
- The GAIN BOOST control adjusts the gain for more extreme distortion sounds.
- The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
- Use the footswitch to activate/deactivate the effect.
- Use this ¼” TS IN connector to plug in the instrument cable.
- The ¼” TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.
- The HD300 has no on/off switch. As soon as you insert the plug into the connector, the HD300 is on. When not in use, remove the plug from the in-connector. This extends the life of the battery.
The SERIAL NUMBER is located on the underside.
Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service the product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when the power supply cord or plug is damaged.
Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully.
Specifications
In
- Connector 1/4″ TS
- Impedance 500 kΩ
Out
- Connector 1/4″ TS
- Impedance 1 kΩ
Power Supply
9 V?, 100 mA regulated
BEHRINGER PSU-SB
- USA/Canada 120 V~, 60 Hz
- China/Korea 220 V~, 50 Hz
- U.K./Australia 240 V~, 50 Hz
- Europe 230 V~, 50 Hz
- Japan 100 V~, 50 – 60 Hz
- Power connector 2 mm DC jack, negative centre
- Battery 9 V type 6LR61
- Power consumption 30 mA
Physical/Weight
- Dimensions approx. 2 1/8 x 2 3/4 x 4 4/5″
- (H x W x D) approx. 54 x 70 x 123 mm
- Weight approx. 0.73 lbs/0.33 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP (MUSIC- GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS THAT MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM THE ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF THE MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND THE MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands.