NGP Aluminum Nylon Brush Door Sweeps User Manual

September 4, 2024
NGP

National Guard Products Inc.
1-800-647-7874

Door Sweeps

WARNING: These products can expose you to chemicals including chloroprene or DINP Diisononyl phthalate, which are known to the State of California to cause cancer and/or developmental and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Installation Instructions

  1. Cut sweep to fit.
  2. Close door. Hold sweep at bottom of door. Tap down until contact is made between the sweep and threshold.
  3. Mark screw holes.
  4. Drill pilot holes for screws using a 7/64″ drill bit.
  5. Install with screws provided.
  6. Adjust position so sweep does not impede proper closing and latching of door.

POSITIVE PRESSURE TESTED GASKETING MATERIALS FOR FIRE DOORS
FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS
RATED UP TO 3 HOURS AND WOOD-TYPE FIRE DOORS RATED UP TO 1-1/2 HOURS.
CATEGORY H
Smoke and Draft Control gasketing (Category H) tested to UL 1784; meets requirements of NFPA 105, IBC for use on “S” label doors.
10.18

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals