NGP C627 Door Sweeps Instructions

: September 3, 2024
: NGP

Table of Contents

C627 Door Sweeps
Product Information
Specifications:
- Product Usage Instructions
Installation Instructions:
Note:
- FAQ
Q: Are the screws required for installation included in the
Q: Is this product suitable for use on all types of doors?

C627 Door Sweeps

“`html

Product Information

Specifications:

Brand: National Guard Products Inc.
Contact: 1-800-647-7874
Product Type: Door Sweeps
Material: Gasketing Material
Fire Rating: Up to 3 hours for hollow-metal-type fire doors, up
to 1-1/2 hours for wood-type fire doors
Category: H – Smoke and Draft Control gasketing
Testing: Positive pressure tested for fire doors
Compliance: UL 1784, NFPA 105, IBC

Product Usage Instructions

Installation Instructions:

Cut the sweep to fit the door size.
Close the door and hold the sweep at the bottom of the
door.
Tap down the sweep until contact is made with the
threshold.
Mark the screw holes for installation.
Drill pilot holes for screws using a 7/64 drill bit.
Install the sweep using the provided screws.
Adjust the position of the sweep to ensure it does not impede
proper closing and latching of the door.

Note:

This product is designed for use on fire doors to provide smoke
and draft control. Follow local building codes and regulations
during installation.

FAQ

Q: Are the screws required for installation included in the

package?

A: Yes, screws required for installation are provided with the
product.

Q: Is this product suitable for use on all types of doors?

A: This product is specifically designed for hollow-metal-type
fire doors rated up to 3 hours and wood-type fire doors rated up to
1-1/2 hours. Ensure compatibility before installation.

“`

National Guard Products Inc.
1-800-647-7874

Door Sweeps

WARNING: These products can expose you to chemicals including chloroprene or DINP Diisononyl phthalate, which are known to the State of California to cause cancer and/or developmental and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
ADVERTENCIA: Estos productos pueden exponerlo a productos químicos incluyendo el cloropreno o ftalato de di-iosononilo DINP, que el estado de California considera causante de cáncer y/o daños al desarrollo y al sistema reproductivo. Para mayor información visite la página www.P65Warnings.ca.gov.
Installation Instructions
1. Cut sweep to fit. 2. Close door. Hold sweep at bottom of door. Tap down until contact is made between the sweep and threshold. 3. Mark screw holes. 4. Drill pilot holes for screws using a 7/64″ drill bit. 5. Install with screws provided. 6. Adjust position so sweep does not impede proper closing and latching of door.
Instrucciones de Instalación
1. Corte el guardapolvo a la medida. 2. Cierre la puerta. Sostenga el guardapolvo en la parte inferior de la puerta. Golpeé suavemente hasta que el
guardapolvo haga contacto con el umbral. 3. Marque los orificios de los tornillos. 4. Taladre los orificios para los tornillos usando una broca de 7/64″. 5. Instale con los tornillos suministrados. 6. Ajuste la posición para que el guardapolvo no impida cerrar y correr debidamente el pasador de las puertas.

POSITIVE PRESSURE TESTED GASKETING MATERIALS FOR FIRE DOORS
FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS RATED UP TO 3 HOURS AND WOOD- TYPE FIRE DOORS RATED UP TO 1-1/2 HOURS. CATEGORY H
Smoke and Draft Control gasketing (Category H) tested to UL 1784; meets requirements of NFPA 105, IBC for use on “S” label doors.
10.18

MATERIAL DE EMPAQUE PARA PUERTAS CORTAFUEGO SOMETIDOS A PRUEBAS DE PRESION POSITIVA, PARA USARSE EN PUERTAS METALICAS HUECAS CORTAFUEGO, CERTIFICADAS HASTA 3 HORAS Y PUERTAS DE MADERA
CORTAFUEGO, CERTIFICADAS HASTA 1-1/2 HORAS CATEGORÍA H
Empaques Para Control de Humo y Corrientes de aire (Categoría H) probados de acuerdo a UL 1784; cumple con los requisitos de NFPA 105, IBC para usarse en puertas etiquetadas “S”.