Eurofase LIGHTING 48095 Cerissa Rectangular Color Select LED Mirror Instruction Manual

: September 3, 2024
: EUROfase LIGHTING

Table of Contents

Eurofase LIGHTING 48095 Cerissa Rectangular Color Select LED Mirror
IMPORTANT SAFETY INSTRUCTIONS
Option
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Eurofase LIGHTING 48095 Cerissa Rectangular Color Select LED Mirror

Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

Attention to installer, must test the light fixture before
When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using (this furnishing).
DANGER – To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning or
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
Unplug from outlet before putting on or taking off
Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled
Use this furnishing only for its intended use as described in these Do not use attachments not recommended by the manufacturer.
Never operate this fumishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into Return the furnishing to a service center for examination and repair.
Keep the cord away from heated
Never operate the fumishing with the air openings Keep the air openings free of lint, hair, and the like.
Never drop or insert any object into any
Do not operate where aerosol (spray) products are being used or where oxygen is being
To disconnect, turn all controls to the off position, then remove plug from
WARNING: Risk of Injury – Keep children away from this
WARNING: Risk of Electric Shock – Connect this furnishing to a properly grounded outlet See Grounding Instructions.
GROUNDING INSTRUCTIONS:
For a permanently connected product: This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the
For a grounded, cord-connected product rated max 15 amperes and intended for use on a nominal 120-volt supply circuit :
This product is for use on a nominal 120-volt circuit and has a grounding plug. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this
For loading always put heavier items at the bottom and not near the top in order to help prevent the possibility of the furnishing tipping
WARNING: Risk of Injury to Persons – do not use this furnishing to support video equipment such as televisions or computer
Mount furnishings at the correct
This unit is suitable for installation in a damp, indoor location
This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building
Save this instructions for future
Estimated Assembly Time: 20 minutes

Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters. Helpful Tools (not included): Wire strippers, Ladder.

HARDWARE INCLUDED

Temporarily secure the paper (G) to the wall, then mark the anchor (D) locations on the wall through the holes. Remove the paper (G) and drill holes making them slightly smaller than the anchors (D) provided.