MillSO MQ1 USB Computer Microphone User Manual
- June 16, 2024
- MillSO
Table of Contents
MillSO MQ1 USB Computer Microphone User Manual
Specifications
| Model | MQ1 |
|---|---|
| Directivity | Omni-directional |
| Connector type | USB-A direct plug |
| Power supply mode | USB 4.5-5V |
| Total length | 13.7 inch / 35 cm |
| Frequency response | SOHZ-16KHZ |
| Signal-to-noise ratio | > 36dB |
| Sensitivity | -30±3dB |
| Impedance | 2.2K0 |
Precautions
Thank you for purchasing the MillISO USB microphone, please read this user manual carefully before use
- Can not be used in a humid environment.
- Can not be used on equipment that exceeds the working voltage of this microphone. The working voltage of this product is 4.5-5V.
- When it is not used for a long time, please unplug the microphone.
- When using, do not tap the microphone to avoid damaging the parts.
Using with PC or laptop
For Windows (Take Windows 10 for example)
To ensure the USB microphone is configured correctly on the PC, follow the steps below:
-
Plug the USB port of the microphone directly into your laptop or desktop computer.
-
Right-click on the sound icon in the system tray and select “Open Sound Settings”.
-
Select Sound Control Panel
-
On the Recording tab, you can see the Microphone icon labeled “USB PnP Sound Device” is set up and is on default, double click on microphone, then you can find “Microphone Properties”.
Notice: If you insert an extra earphone, please make sure the USB PnP Sound Device is the default device in the Recording tab. -
On to the Listen tab, if you need to monitor when recording, check the “Listen to this device” button, then click “OK” to save the settings.
Notice: This listen function is for testing the microphone. If you don’t need to hear your own voice, please don’t turn on the listen function. -
On the Levels tab, you can adjust the volume according to your personal preference.
Notice: Since each computer system is different, the volume of the microphone needs to be adjusted according to the respective computer.
For Mac OS (Take Macbook Air for example)
To confirm that the USB microphone is configured correctly on Mac, follow the steps below:
-
Click the desktop menu, then click “System Preferences”
-
Find “Sound” button and click it.
-
Choose input you will find internal microphone (like Macbook Air Microphone), turn off the input volume.
-
Choose “USB PnP Sound Device”, and adjust input volume (general adjustment to the middle)
-
Test the microphone sound: search out the computer that comes with the software “Voice Memos”
-
After selecting the external USB microphone, click the Record button and you can record it
Customer Service
Warranty Policy
MilISO offers 24*7 friendly customer service, 18-month extended warranty, and Lifetime Technical Support for our audio adapters, to ensure your pleasing shopping experience.
Extend to 18-Month Warranty
Email: Edit your order number and “18 months extended warranty” To: support@millso.com
Need any help?
Tell your issue to our customer support team via support@millso.com
Happy with this purchase?
Welcome to share your shopping experience on the product page!
Share with Your Friends
https://www.facebook.com/millsofans
https://twitter.com/millsofans
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>