GlobalSat Globalat HR-50 Optical Heart Rate and Activity Tracking Fitness Band User Manual
- June 4, 2024
- GlobalSat
Table of Contents
Globalat HR-50 Optical Heart Rate and Activity Tracking Fitness
Band
User Manual
Introduction
1.1 Product Description
HR-50 / HR-50B / HR-50N is a heart rate monitor device with activity tracking
function (B/N model). You can know your heart rate when the heart rate
function is working (all models). Besides, HR-50 B / HR-50N also records your
daily steps, calories, and sleep pattern. By connecting to the APP, you can
check your heart rate status (all models) and daily activity information (B/N
model). We believe HR-50/B/N would be your best sport and activity tracking
(B/N model) fitness band.
1.2 Features
Features with different models:
HR-50|
---|---
HR-50B|
HR-50N|
Feature description:
| Utilizing wireless Blue-tooth low-energy technology for smart phone
connection and data transfer.
---|---
| APP could be downloaded to your smartphone.
| An optical heart rate monitor could be used to measure your heart rate.
| Built-in pedometer counts your daily steps.
| Built-in calorie calculator to count your daily calorie.
| Sleep quality monitors can track and record your sleep pattern.
| Show time of day.
| NFC tag for identification recognition.
Getting Started with Your HR-50 / HR-50 B/ HR-50N
2.1 First-Time Use
Please take out the battery insulation film to enable HR-50 / HR-50 B/ HR-50N
before first-time use.
2.2 Battery Change Method
2.2.1 Put HR-50/B/N main device into the device holder.
2.2.2 Open the top case by using the attached top case opener and rotate the top case in a counterclockwise direction for about 15 degrees.
2.2.3 Lift the top case by your hand. Please note that you could lift the top case easier by lifting the 12 or 6 o’clock direction tooth.
2.2.4 Open the battery latch and you could change to a new battery.
2.3 Take HR-50/B/N Out from Device Holder
You could take HR-50/B/N out from the device holder by bending the latch of
device holder (in a 6 or 12 o’clock direction) and push HR-50/B/N from its
back at the same time.
2.4 Wear HR-50/B/N on Your Wrist
Please note that it is suggested to wear HR-50/B/N in the below recommended
part on your wrist and HR-50/B/N should be tied enough without slipping back
and forth on your wrist. By the way, you could also take out HR-50/B/N from
its holder and wear HR-50/B/N by using your own wrist sleeve.
2.5 Trigger Your Device
2.5.1 For HR-50B & HR-50N
The step, calorie, and sleep function will be always on and cannot be turned
off. So, there is no need to activate these functions. As for the heart rate
function, press the button for 3 seconds to turn on (off) the HR-50B/N heart
rate function and LED will light in a clockwise (counterclockwise)
direction.
2.5.2 For HR-50
Press the button for 3 seconds to turn on (off) the heart rate function and
the 12 o’clock LED will flash.
2.6 Show Time of Day
2.6.1 For HR-50B & HR-50N
When you click the button of HR-50B/N, LED will show the current time of day
with the hour hand keeps on and the minute hand flashing. If the hour and
minute hand overlap, LED will be on for a while and then flash.
2.7 Low Power Indication
When HR-50/B/N is going to run out of battery, LED in the 12 o’clock direction
will keep flashing. This is a reminder for user to replace a new battery.
Please note that when the battery is low, the heart rate/time / APP data
transfer function will be off. However, step/calorie / sleep function will
still be working until HR-50/B/N runs out of battery.
2.8 System Reset
2.8.1 For HR-50B & HR-50N
Please make sure that the heart rate function of your HR-50B & HR-50N is off
before doing a factory reset. Then, long press the button for 12 seconds to do
a system reset. All data in HR-50B/N will be cleared after doing a system
reset. Thus, please synchronize your data before doing a system reset.
2.9 NFC Tag Area
2.9 For HR-50N
Only the HR-50N model has the NFC function and you can tag your HR-50N by the
NFC tag area. Please refer to the below-shaded area about the NFC tag area.
Getting Started with Your APP
PS: Please note that when using HR-50 with this APP, this APP only supports the instant HR function on the TODAY page.
3.1 APP Installation
Please go to App store / Google play and search “globalsat gsport2”. Then, you
will find the below icon. Please install gSport2 APP in your mobile device.
(for iPad user, please search iPhone app)
Or you could scan below QR code to install the APP
|
---|---
https://itunes.apple.com/tw/app/g-sport/id662862421?l=zh&mt=8|
https://play.google.com/store/apps/details?id=tw.com.globalsat.android.HR50
3.2 Start Your App
Step 1: Place your HR-50/B/N near your mobile device.
Step 2: Look for the gSport2 icon in your mobile device, and then click to open the gSport2 APP.
PS: If this is your first-time use, please go to the DEVICE page. Then, follow the steps described on the DEVICE page to do the pairing process. When you successfully pair your HR-50/B/N with gSport2 APP, you can start to use it.
3.3 TODAY page:
When you run gSport2 APP, you will enter the TODAY page and the gSport2 APP
will synchronize with your HR-50/B/N automatically. Then, you can check
today’s steps, calories burned, and your current heart rate. You can also
synchronize your HR-50/B/N with gSport2 APP instantly by pressing the sync.
the icon on the upper-right of the TODAY page.
3.4 MAIN page:
You can go to different functions of the gSport2 APP in this MAIN page.
Besides, you can also check your battery and connection status on the MAIN
page.
3.5 PROFILE page:
You can set your personal profile in the PROFILE page.
3.6 GOAL page:
You can set your daily goal of steps and sleep hours on the GOAL page. Please
press the “Apply” button when you finish setting your daily goal. Besides,
gSport2 APP will also show your heart rate intensity zone.
3.7 ACTIVITY page:
- Load record: By pressing the synchronization button on the upper-right of the ACTIVITY page, you can load the activity record from HR-50B/N to gSport2 APP.
- Review record: You can check the record of your daily steps on the ACTIVITY page. When you select a specific daily step date, you can view your steps bar chart, total steps, calorie burned, goal achieved, walking/running/total distance, and walking/running time on that date.
3.8 SLEEP page:
- Load record: Your sleep record will show up “AUTOMATICALLY” once you load your activity data in the ACTIVITY page. Or, you can also press the synchronization button on the upper-right of the SLEEP page to load the sleep record. However, if you want to assign your specific start/end time of sleep, please press the “+” button on the upper-right of the SLEEP page and choose the start/end time of your sleep duration. Then, you can load your assigned sleep record.
- Review record: You can check your daily sleep record on the SLEEP page. When you select a specific sleep date, you can view your sleep record about light sleep, deep sleep, awake, total sleep hours, and goals achieved on that date.
3.9 HEART RATE page:
- Load record: By pressing the synchronization button on the upper-right of the HEART RATE page, you can load the heart rate record from HR-50B/N to gSport2 APP.
- Review record: You can check your heart rate status during your exercise by entering this HEART RATE page. This page will show you your heart rate zone, average heart rate, Max./Min. heart rate and total time span between you turn on/off your heart rate.
3.10 DEVICE page:
You can pair your HR-50/B/N with gSport2 APP on the DEVICE page. Press the
icon in the upper-right of the DEVICE page and the gSport2 APP will start to
search HR-50/B/N device.
When your HR-50/B/N is found, please tap the device shown. Then, there will be
a pop-up message asking you to connect with your HR-50/B/N. Please press OK
and you can connect your HR-50/B/N with gSport2 APP.
3.11 ABOUT page:
You can view your gSport2 APP version in the Version row and HR-50/B/N device
firmware version in the Device firmware row on the ABOUT page.
Firmware Upgrade
4.1 Firmware Upgrade Notification
Please note that if your HR-50B/N device firmware is not the latest. There
will be a pop-up message showing up on the ABOUT page reminding you to upgrade
your HR-50B/N device firmware.
4.2 Firmware Upgrade Steps
Press YES when there is a pop-up message showing up to remind you to upgrade
your HR-50B/N device firmware. Then, the latest HR-50B/N firmware will be
transferred from gSport2 APP to the HR-50B/N device. After the transferring
process finishes, please make sure to press OK at the message showing the
firmware transfer completed. Then, your HR-50B/N device will have the latest
firmware.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>