NGP 600 Nylon Brush Perimeter Seals Instructions
- September 3, 2024
- NGP
Table of Contents
NGP 600 Nylon Brush Perimeter Seals
Specifications
- Manufacturer: National Guard Products Inc.
- Product: Nylon Brush Perimeter Seals
- Phone: 1-800-647-7874
- Positive pressure-tested gasketing materials for fire doors
- For hollow-metal-type fire doors rated up to 3 hours and wood-type fire doors rated up to 1-1/2 hours
Product Usage Instructions
Installation
- Remove the brush from the metal retainer.
- Cut the brush to fit the opening using pliers or diagonal cutters.
- If bristles are loose, secure them with a drop of adhesive.
- Cut the metal retainer to the required length.
- Replace the brush in the metal retainer.
- With the door closed, position the seal and mark screw holes.
- Drill pilot holes for screws using a 7/64 bit.
- Install the seal using the provided screws.
- Slightly peen the bottom end of each retainer to secure the brush in place.
- Adjust the position of the seal so that the brush touches the door without hindering proper closing and latching.
600, 602, A605, B606, A617, A625, A626, 672, 675, 706, 706E, 9000, 9600, 9605, 9675, 9706E
- POSITIVE PRESSURE TESTED GASKETING MATERIALS
- FOR FIRE DOORS
- FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS RATED UP TO 3 HOURS AND WOOD-TYPE FIRE DOORS RATED UP TO 1-1/2 HOURS.
- CATEGORY H
- Smoke and Draft Control door bottom (Category H) tested to UL 1784; meets requirements of NFPA 105, IBC for use on “S” label doors. Applies to the following models: 600, 602, A605, B606, A617, A625, A626, 672, 675, 706, 706E, 9000, 9600, 9605, 9675, 9706E
601, 603, C607, D608, G610, H612, C619, F625, OV633, OV634, D648
- POSITIVE PRESSURE-TESTED GASKETING MATERIALS FOR FIRE DOORS
- FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS RATED UP TO 3 HOURS AND WOOD-TYPE FIRE DOORS RATED UP TO 1-1/2 HOURS.
- CATEGORY J
D620, G622, H623, I624
- POSITIVE PRESSURE-TESTED GASKETING MATERIALS FOR FIRE DOORS
- FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS
- RATED UP TO 3 HOURS AND WOOD-TYPE FIRE DOORS RATED UP TO 1 HOUR.
- CATEGORY J
FAQ
Q: What types of fire doors are compatible with the Nylon Brush Perimeter Seals?
A: The seals are suitable for hollow-metal-type fire doors rated up to 3 hours and wood-type fire doors rated up to 1-1/2 hours.
Q: How do I know if the brush needs adhesive for securing?
A: If the bristles are not tightly secured in the metal retainer, use a drop of adhesive to prevent them from moving.
Q: What size drill bit should I use to create pilot holes for screws?
A: Use a 7/64 bit to drill pilot holes for the screws provided with the Nylon Brush Perimeter Seals.