ice watch CL3799 Black White Digit Explorer Instruction Manual

ice watch CL3799 Black White Digit Explorer

Specifications

• Water Resistant: 100m
• Battery: CL3799

Product Usage Instructions

General Guidelines

1. Never try to open the case or remove its back cover.
2. Do not operate buttons underwater.
3. If moisture appears inside the watch, have it checked immediately by your dealer.
4. Avoid rough use or dropping the watch.
5. Avoid exposing the watch to temperature extremes.
6.  Wipe the watch with a dry, soft cloth only. Avoid contact withchemical materials.
7. Avoid wearing the watch in electromagnetic or static conditions.

Product Functions

• Backlight: Press and hold D to illuminate the display for about 3 seconds.
• Date Display: Press and hold C to display Month and Date.
• Chronograph Display: Press B once.
• Alarm Time Display: Press B twice.
• Timer Display: Press B three times.
• Dual Time Display for Other Time Zone: Press B four times.

Time Setting

1. Press and hold A until the seconds flash to enter set mode.

2. Press C to reset the seconds.

3. Use B to change to the next selection.

4. Press C to increase the number; hold for high-speed increase.

5. Repeat steps 3 and 4 for the following sequence: Seconds >
   Hour > Minutes > Month > Date > Day of Week > 12/24H Format.

6. Press A once to return to the time screen.

Chronograph Function

• Lap Time: N/A
• Split Time: N/A

FAQ
Q: Can I wear the watch underwater?
A: It is not recommended to operate buttons underwater or expose the watch to water pressure beyond its 100m water resistance rating.

ATTENTION

1. Never try to open the case or remove its back cover.
2. Do not operate buttons underwater.
3. Should moisture appear inside the watch, have it checked immediately by your dealer.Otherwise it can cause erosion of the metal parts of the watch.
4. Though the watch is designed to withstand normal use, you should avoid rough use or dropping the watch.
5. Avoid exposing the watch to temperature extremes.
6. Wipe the watch with dry, soft cloth only. Avoid allowing it to come into direct contact with chemical materials, which can cause deterioration of the plastic parts of the watch.
7. Avoid to wear the watch in electromagnetic, static conditions.
8. The information contained in this document belongs to ICE Universal Ltd and may not be reproduced without its authorization.

WATER RESISTANT: 100m
BATTERY: CL3799

General functions

1. USE THE BACKLIGHT: press and hold D to illuminate the display about 3 seconds.
2. DISPLAY THE DATE: press and hold C to display: Month, Date.
3. DISPLAY THE CHRONOGRAPH: press one time B.
4. DISPLAY THE ALARM TIME: press B two times.
5. DISPLAY THE TIMER : press B three times.
6. DISPLAY DUAL TIME FOR OTHER TIME ZONE : press B four times.

TIME SETTING

1. Press and hold A until the seconds to flash (flashing indicated in set mode).
2. Press C to reset the seconds.
3. Press B to change to the next selection.
4. Press C to increase the number, press and hold to increase at high speed.
5. Repeat step 3 and 4, the selection in the following sequence: SECONDS › HOUR › MINUTES › MONTH › DATE › DAY OF WEEK › 12/24H FORMAT
6. Press one time A to return to time screen.

In the «Time Setting Mode,» press B six times and then press C once to toggle between the 12-hour format and the 24-hour format.

CHRONOGRAPH

LAP TIME

1. Press one time B to access the « Chronograph Mode ».
2. Press C to start the chronograph.
3. Press C again to stop the chronograph.
4. Press A to reset the chronograph.
5. Press B to return to time screen.

SPLIT TIME

1. Press one time B to access the « Chronograph Mode ».

2. Press C to start the chronograph.

3. Press A to display the split time, stopwatch timeing continues internally.

4. Press A to clear the split time and to continue time measurement.
   Repeat step 3 and 4, you can measure the multi split time.

5. Press C to stop the chronograph.

6. Press one time C and one time A to return to the « Chronograph Mode » screen.

7. Press B to return to time screen.

ALARM TIME SETTING

1. Press two times B to access the « Alarm Mode ».
2. Press A the hour to flash (flashing indicated in set mode).
3. Press C to increase the hour, press and hold to increase at high speed.
4. Press B to select the minutes.
5. Press C to increase the minutes, press and hold to increase at high speed.
6. Press B once to access the time zone selection.
7. Press C once to change time zone.
8. Press A once to return to the « Alarm Mode » screen.
9. Press B to return to time screen.

ALARM AND CHIME

1. Press two times B to access the « Alarm Mode ».
2. Press C to activate the alarm.
3. Press C a second time to activate the alarm and the chime.
4. Press C a third time to deactivate the alarm and keep the chime.
5. Press C a fourth time to deactivate the alarm and the chime.
6.  Press B to return to time screen.

SNOOZE

• The alarm sounds at present time each day for about 60 seconds.
• Press any button to break it.

SET TIMER

1. Press B three times to access the « Timer Mode ».
2. Press A the hour to flash (flashing indicated in set mode).
3. Press C to increase the hour, press and hold to increase at high speed.
4. Press B to select the minutes.
5. Press C to increase the minutes, press and hold to increase at high speed.
6. Press B to select the seconds.
7. Press C to increase the seconds, press and hold to increase at high speed.
8. Press A once to return to the « Timer Mode » screen.
9. Press B once to return to the time screen.

COUNTDOWN

1. Press B three times to access the « Timer Mode ».
2. Press C to start or stop the timer.
3. Appuyez une fois sur B pour revenir à l’écran de l’heure.

SNOOZE

• One alarm per second sounds for the last 10 seconds.
• When the timer runs out, an alarm will sound for 10 seconds.
• Press any button to break it (B in this case).

DUAL TIME

1. Press B four times to access the « Dual Time Mode ».
2. Press A until the hour flashes (flashing indicates you are in Setting mode).
3. Press C to increase the hour, press and hold to increase at high speed.
4. Press B to select the minutes.
5. Press C to increase the minutes (press once to increase by 30 minutes).
6. Press A once to return to the « Dual Time Mode ».
7. Press B once to return to the time screen.

References

• Momente des augenblicks! › Inmediato

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>