ICE-WATCH 022049-2 Digital Retro Watch User Manual

June 12, 2024
Ice-Watch

**ICE-WATCH 022049-2 Digital Retro Watch User Manual

**

ATTENTION

  1. Never try to open the case or remove its back cover.
  2. Do not operate buttons underwater.
  3. Should moisture appear inside the watch, have it checked immediately by your dealer. Otherwise it can cause erosion of the metal parts of the watch.
  4. Though the watch is designed to withstand normal use, you should avoid rough use or dropping the watch.
  5. Avoid exposing the watch to temperature extremes.
  6. Wipe the watch with dry, soft cloth only. Avoid allowing it to come into direct contact with chemical materials, which can cause deterioration of the plastic parts of the watch.
  7.  Avoid to wear the watch in electromagnetic, static conditions.
  8. The information contained in this document belongs to ICE Universal Ltd and may not be reproduced without its authorization.
    Product Overawe

General functions

  1. USE THE BACKLIGHT : press and hold C to illuminate the display
  2. DISPLAY THE DATE: press and hold D to display : Year, Month, Date
  3. DISPLAY THE ALARM TIME: press and hold B
  4. ON THE ALARM AND CHIME: press one time B and three times D
  5. OFF THE ALARM AND CHIME: press one time B and one time D
  6. DISPLAY DUAL TIME FOR OTHER TIME ZONE: press B three time

TIME SETTING

  1. Press and hold A until the seconds to flash (flashing indicated in set mode)
  2. Press D to reset the seconds
  3. Press B to change to the next selection
  4. Press D to increase the number, press and hold to increase at high speed
  5. Repeat step 3 and 4, the selection in the following sequence: SECONDS › HOUR › MINUTES › YEAR › MONTH › DATE
  6. Press one time A to return to time screen
    Time Setting

In the «Time Setting Mode», press A to switch between 12/24H formats

ALARM TIME SETTING

  1. Press one time B to access the « Alarm Mode »
  2. Press A the hour to flash (flashing indicated in set mode)
  3. Press D to increase the hour, press and hold to increase at high speed
  4. Press B to select the minutes
  5. Press D to increase the minutes, press and hold to increase at high speed
  6. Press one time A and three times B to return to time screen
    Alarm Time Setting

SNOOZE

  • The alarm sounds at present time each day for about 60 seconds
  • Press any button to break it

STOPWATCH

LAP TIME

  1. Press two times B to access the « Stopwatch Mode »
  2. Press D to start the stopwatch
  3. Press D again to stop the stopwatch
  4. Press A to reset the stopwatch
  5. Press one time A and two times B to return to time screen
    Stopwatch Instructions

SPLIT TIME

  1. Press two times B to access the « Stopwatch Mode »
  2. Press D to start the stopwatch
  3. Press A to display the split time, stopwatch timeing continues internally
  4. Press A to clear the split time and to continue time measurement Repeat step 3 and 4, you can measure the multi split time
  5. Press D to stop the stopwatch
  6. Press one time A and two times B to return to time screen
    Split Time

DUAL TIME

  1. Press three times B to access the « Dual Time Mode »
  2. Pess A the hour to flash (flashing indicated in set mode)
  3. Press D to increase the hour, press and hold to increase at high speed
  4. Press B to select the minutes
  5. Press D to increase the minutes (press once change 30 minutes)
  6. Press one time A and one time B to return to time screen
    Dual Time

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals