Ice Watch CR1616 ICE Digit Gold Metallic Instruction Manual
- June 13, 2024
- Ice-Watch
Table of Contents
CR1616 ICE Digit Gold Metallic
Instruction Manual
CR1616 ICE Digit Gold Metallic
General functions
- USE THE BACKLIGHT: press C to illuminate the display about 3 seconds
- DISPLAY THE DATE: press and hold D
- DISPLAY THE ALARM TIME: press and hold A
- ON/OFF THE ALARM: press A and D at the same time to on/off the alarm
- ON/OFF THE CHIME: press A and B at the same time to on/off the chime
STOPWATCH
LAP TIME
- Press one time B to access the « Stopwatch Mode » (the date is flashing)
- Press D to start the stopwatch
- Press D again to stop the stopwatch
- Press A to reset the stopwatch
- Press B to return to time screen
SPLIT TIME
-
Press one time B to access the « Stopwatch Mode » (the date is flashing)
-
Press D to start the stopwatch
-
Press A to display the split time, stopwatch timing continues internally
-
Press A to clear the split time and to continue time measurement
Repeat step 3 and 4, you can measure the multi split time -
Press D to stop the stopwatch
-
Press B to return to time screen
ALARM TIME SETTING
- Press two time B to access the « Alarm Mode » (the hour is flashing)
- Press D to increase the hour, press and hold to increase at high speed
- Press A to select the minutes
- Press D to increase the minutes, press and hold to increase at high speed
- Press B to return to time screen
SNOOZE
- The alarm sounds at present time each day for about 60 seconds
- Press D to break it, the alarm restarts after 5 minutes
- Press A to stop it
TIME SETTING
- Press three time B to access the « Time Setting Mode » (the second is flashing)
- Press D to reset the seconds
- Press A to change to the next selection
- Press D to increase the number, press and hold to increase at high speed
- Repeat step 3 and 4, the selection in the following sequence: SECONDS › MINUTES › HOUR › DATE › MONTH › DAY OF WEEK
- Press B to return to time screen
ATTENTION
-
Never try to open the case or remove its back cover.
-
Do not operate buttons underwater.
-
Should moisture appear inside the watch, have it checked immediately by your dealer.
Otherwise it can cause erosion of the metal parts of the watch. -
Though the watch is designed to withstand normal use, you should avoid rough use or dropping the watch.
-
Avoid exposing the watch to temperature extremes.
-
Wipe the watch with dry, soft cloth only. Avoid allowing it to come into direct contact with chemical materials, which can cause deterioration of the plastic parts of the watch.
-
Avoid to wear the watch in electromagnetic, static conditions.
-
The information contained in this document belongs to ICE Universal Ltd and may not be reproduced without its authorization.
WATER RESISTANT: 100m
BATTERY: CR1616