Ice-Watch ICE Clear Sunset Fruity Instruction Manual
- June 13, 2024
- Ice-Watch
Table of Contents
ICE Clear Sunset Fruity
Instruction Manual
ICE Clear Sunset Fruity
Getting started
Remove the plastic stopper (in the direction of the arrow).
Instructions
The watch must be serviced regularly in order for it to work correctly. The
length of time between services will vary depending on the model, climate and
the care you take of your watch. As a general rule, we recommend the following
steps so that you can keep your watch in tip-top condition for as long as
possible.
– Temperature: avoid temperatures below 0°C (30°F) or above 35°C (100°F).
– Avoid prolonged exposure to sun, steam, contact with alcohol, detergents,
perfume or cosmetic products to prevent distortion, discoloration or any
damaging reaction.
– Do not use any watch button while under water to prevent water from entering
the mechanism.
The information contained in this document belongs to ICE Universal Ltd and
may not be reproduced without its authorization.
A) SETTING THE DATE
- Gently pull the winder out to the 1st position.
- Turn the winder anticlockwise to set the date. If the date is set between around 9pm and 1am, it is possible that it will not change the next day.
- Return the winder to its normal position.
B) SETTING THE TIME
- Gently pull the winder out to the 2nd position.
- Turn the winder to set the hour and minute hands to the correct positions.
- The second hand starts again when the winder is pushed back into its normal position.
C) SETTING THE DAY OF THE WEEK
- Gently pull the winder out to the 1st position.
- Turn the winder clockwise to set the day of the week. If the day is set between around 9pm and 1am, it is possible that it will not change the next day.
- Return the winder to its normal position.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>