ice watch 020621 Wristwatch plastic Stopper Climate Instruction Manual
- June 1, 2024
- Ice-Watch
Table of Contents
ice watch 020621 Wristwatch plastic Stopper Climate
Product Information
Specifications:
- Model: Multi-language Analog Watch
- Material: Stainless Steel case, Leather strap
- Movement: Quartz
- Water Resistance: 30 meters
- Features: Hour, Minute, and Second hands
Product Usage Instructions
Getting Started:
- Remove the plastic stopper in the direction of the arrow.
- Press the winder to activate the watch.
Setting the Time:
- Gently pull the winder out to the 1st position.
- Turn the winder to set the hour and minute hands to the correct positions.
- The second hand will start moving again when the winder is pushed back into its normal position.
FAQ (Frequently Asked Questions)
-
Q: How do I change the battery of the watch?
A: This watch is powered by a quartz movement which typically lasts a long time. If you need to change the battery, we recommend visiting a professional watch repair service. -
Q: Is the watch water-resistant?
A: Yes, this watch has a water resistance rating of 30 meters, making it suitable for everyday use and light splashes. However, it is not recommended for swimming or diving.
Getting started
- Remove the plastic stopper (in the direction of the arrow
- Press the winder
Instructions
The watch must be serviced regularly for it to work correctly. The length of time between services will vary depending on the model, climate and the care you take of your watch. As a general rule, we recommend the following steps so that you can keep your watch in tip-top condition for as long as possible.
- Temperature: avoid temperatures below 0°C (30°F) or above 35°C (100°F).
- Avoid prolonged exposure to the sun, steam, contact with alcohol, detergents, perfume or cosmetic products to prevent distorsion, discolouration or any damaging reaction.
- Do not use any watch button while underwater to prevent water from entering the mechanism.
The information contained in this document belongs to ICE Universal Ltd and may not be reproduced without its authorisation.
SETTING THE TIME
- Gently pull the winder out to the 1st position.
- Turn the winder to set the hour and minute hands to the correct positions.
- The second-hand starts again when the winder is pushed back into its normal position.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>