ice-watch Amoled 1.2 Inch Smart Watch User Manual
- June 1, 2024
- Ice-Watch
Table of Contents
ICE SMART
2.0
USER MANUAL
IN CASE OF EMERGENCY
SPECIAL FUNCTION
Display the emergency contact information. You can record 3 emergency contacts
via the application
The Ice-Watch equipment model ICE 2.0 (1.2) complies with the requirements of
the European Directive RED 2014/53/EU. The full document is available at www
.ice-watch.com
SAR/DAS:
Head SAR : 0.017 W/Kg / Wrist SAR : 0.039 W/kg
Notes:
- The company reserves the right to modify the contents of this manual without any further notification. It is normal that some functions may vary in certain versions of software.
- Please charge this product with the cable that was supplied with it for at least 2 hours before you use it.
- Before you use the product, you need to connect to the APP to synchronize time and set your personal information.
- This product has an IP68 waterproof rating, but it is not suitable for deep sea diving. Hot water, tea and corrosive liquids could destroy the watch, so damage by these liquids will not be covered by the product warranty and free maintenance services.
Use your watch in accordance with the 3 ATM and IP68 standards.
HOW TO WEAR YOUR WATCH
Please wear the device on your wrist correctly, about one finger width from
the carpal bone and adjust it to comfortable position. Below picture for
reference.
Please wear the device a little tighter when you are using the heart rate
monitor.
HOW TO DOWNLOAD & CONNECT TO APP
a. Methods to download & install the APP.
Scan “ICE” QR code to download and install “ICE smart” APP.
Find the QR code on the settings page. Turn on the watch, open “Settings > About > App QR code”, scan QR code to download and install the “ICE smart” APP.
Search “ICE smart” in App Store or Play Store to download and install the “ICE
smart” APP.
b. Open “ICE smart” APP and select «Add Device» on the device page, then
follow the instructions on the screen.
c. How to connect to bluetooth call feature:
For most Android phones, once your watch has been correctly connected to the
app, you will see a “PAIR & CONNECT” pop-up reminder. Choose to pair with “ICE
2.0 (1.2)”, then the connection will be finalized.
For all iOS mobile phones and some Android mobile phones, once your watch has
been correctly connected to the app, you should go to the settings page of
your mobile phone, search and select “ICE 2.0 (1.2)” in the Bluetooth list and
then click it to pair. The Bluetooth call feature can be used after your
devices have been paired.
TIPS
-
Please upgrade the APP to the latest version to ensure the best experience.
-
It is recommended to use the watch with a mobile phone system running Android 5.0 or IOS 9.0 or above.
-
The first time you connect with an iPhone, the “Pair” reminder will pop-up. Click to pair so incoming calls and instant messages can come to your watch.
-
The first time you connect with an Android phone,
a “Permissions” reminder will pop-up, please follow the guide and allow the required permissions to ensure all functions can work properly. -
To successfully connect your watch and your phone, please turn on your mobile phone’s Bluetooth, GPS and network connections.
-
If the device cannot be found or connected during use, please reset or turn off your watch and then try again.
OPERATING INSTRUCTIONS
Shortcut page: Slide down from the main page to get to the shortcut page.
Message page: Slide up from the main page to access message page.
Main Menu Page: Slide right from the main page to enter into main menu, slide left to return to the main page. Long press the screen to choose different menu styles. Rotate the crown to scroll up and down the menu.
Favourite page: Slide left from the main page to access a few favourite pages. Long press the screen to remove favorite pages.
Quick access to change the watch face: Keep your finger pressed on the watch face for 3 seconds to enter the watch face interface. Then swipe left to switch the watch face, and click the face you want to select or rotate the crown to change the desired watch face.
Shut down: Keep your finger pressed on the crown for 3 seconds to turn the watch off.
Press crown : When you are using normal functions, press the crown to return
to the previous function interface; When you are in the watch face interface,
press the crown to turn the screen on/off.
Quick access to Sports Mode: Press the crown two times to access the Sports
Mode directly.
FUNCTIONS
Activity: Records the number of steps, distance covered and calories used in a day. More detailed information analysis and data records can be viewed in the APP.
Phone call: Turn on the Bluetooth call function connection (see 2c How to
connect to the Bluetooth call feature). Recent calls: Records your call
history. Dial keyboard: You can enter a phone number via your watch.
Contacts: Contacts can be added synchronously on the APP.
Sleeping: Your watch can record and display your total amount of sleep and the amount of deep sleep and light sleep that you had during the previous night. More detailed information analysis and data records can be viewed in the APP.
Heart rate monitor: Click the heart rate interface to measure your current heart rate. Turn on all-day heart rate measurement via the APP. According to the selected heart rate monitoring period, your watch can record and display your heart rate for 24 hours a day. More detailed information analysis and data records can be viewed in the APP. (This information is for your reference only and cannot be used as a basis for medicaldecisions).
Blood pressure monitor: Test your current blood pressure and record your last 7 blood pressure test results. More detailed information analysis and data records can be viewed in the APP. (This information is for your reference only and cannot be used as a basis for medical decisions).
Blood oxygen monitor: Test your current blood oxygen levels, record your last 7 blood oxygen test results. More detailed information analysis and data records can be viewed in the APP. (This information is for your reference only and cannot be used as a basis for medical decisions).
Sports mode: Supports 100+ sports modes like walking, outdoor running, cycling, skipping, badminton, etc. More detailed information analysis and data records can be viewed in the APP.
Sports Records: Record the latest 5 sports results.
Weather: Displays the current weather conditions and the weather for the next 6 days. Weather information needs to be connected in the APP before this data can be obtained. If the connection has been disconnected for a long time, this weather information will not be updated.
Notifications: Synchronize the information notifications from your phone and display your last 8 information notifications (for this you need to turn on «message notification» in the APP).
AI voice assistant: Click AI voice function button. Say the wake up word for your phone’s AI voice assistant (for example, the wake-up word for iPhone is “Hey Siri”). Please make sure that the Bluetooth function has been successfully connected.
Camera control: After connecting to the APP, the watch can be used as a mobile
phone camera remote control.
First open the camera on the mobile APP, then click on the watch camera
control page to trigger the mobile phone camera shutter.
Music control: After you have connected your watch to the APP, it can control the music play/pause/previous song /next song and volume adjustment functions on your phone.
Always-On-Display: You can choose a digital clock or an analog clock and display it when the watch screen is off. (If this function is turned on, the usage time will be shortened).
Call & Audio Settings: Phone Call ON enables BT calls. Media Audio is to control the sound from apps with media. When it is ON, sound will come to the watch. When OFF, it will play on phone.Call reset is to clear all the call records and contacts in the watch. Stress : Press the screen to test current stress status with 24 hour record shown. More details can be viewed in the App. (Data is for your reference only and cannot be used for medical purpose).
Cycle Tracking: Set the details in the App first, it will show the current stage of your periodic cycle. (Data is for reference only and cannot be used for medical purpose.)
More functions: Timer, Alarm clock, Stopwatch, Menstrual Period Calendar,
Flashlight, Calculator and Find Phone.
Settings: Display, AOD, Vibrate & Ring, Do Not Disturb, Low Power Mode,
Call & Audio Settings, System and About.
OTHER FUNCTIONS
Pedometer, Calories, Sedentary behavior reminder, do not disturb mode, low battery reminder, incoming call reminder, watch face/customized watch face, 12/24h time system, unit setting, etc.
LANGUAGES
English, French, Dutch, German, Spanish, Italian, Portuguese, Chinese, Japanese.
CHARGING
- Attach the charging cable to the watch charging port, make sure that the metal pins are completely connected.
- Please use the correct charging adapters which are 5V, 0.5A.
If the smart watch cannot be turned on after being left unused for a long time, please clean the metal charging pins with dry cloth to make sure that they can connect properly.
WARRANTY
Each watch comes with a 2 YEARS LOCAL WARRANTY against defects in materials
and workmanship. This warranty covers all parts except the battery, the strap
and the charging cable.
The following causes of defects are not covered by the free warranty service:
- Personal assembly or disassembly.
- Damage caused by the watch being dropped during use.
- Any man-made damage or damage through the fault of a third party, improper use (such as: waterin the smart watch, shattering due to external forces, scratching during use etc.)
Please provide the warranty card with all details filled in when you request aftersales services.
Please contact dealers directly for warranty services.
This limited warranty is void if the defect is discovered to be caused by abuse or tampering with the watch.
TIPS
- In order to ensure the waterproof performance of the product, do not open the back cover of the watch without authorization, and do not soak it in hot water, hot tea or any corrosive liquids.
- This product contains a lithium battery, please make sure that you take it to a designated battery recycling point for product recycling.
CAUTION
- Please read the user manual carefully before first use and keep it properly for future references.
- Only use included cable for charging.
- Please don’t leave the device charging alone.
REPLACE THE STRAP
Remove the strap from the watch by sliding the quick release on the strap.
Date:
Watch ID:
Stamp:___
Scan the QR code to dowload the APP