OMCAN SB-CN-0025 Automatic Electric Bread Slicers Instruction Manual
- June 5, 2024
- OMCAN
Table of Contents
Bread Slicers
Models SB-CN-0025, 0013, 0019, 0016, 0011
Items 44246, 44247, 44248, 44249, 44250
Instruction Manual
STOP
DO NOT RETURN THIS PRODUCT TO THE STORE
For questions or assistance with this product call OMCAN
Toll-Free: 1 800 465 0234
Customer Service or visit the Support section of
www.omcan.com
Revised – 04/23/2021
Toll-Free: 1-800-465-0234
Fax: 905-607-0234
Email: service@omcan.com
www.omcan.com
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine and is wearing authorized proper safety clothing. Any modification to the machine voids any warranty and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no
damage is evident on the external packaging, open the carton to ensure all
ordered items are within the box, and there is no concealed damage to the
machine. If the package has suffered rough handling, bumps, or damage (visible
or concealed), please note it on the bill of lading before accepting the
delivery and contact Omcan within 24 hours, so we may initiate a claim with
the carrier. A detailed report on the extent of the damage caused to the
machine must be filled out within three days, from the delivery date shown in
the shipping documents. Omcan has no recourse for damaged products that were
shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also, save the original box and packaging for shipping the equipment if servicing or returning of the machine is required.
Safety and Warranty
DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS
For your safety, this equipment has been verified by qualified technicians and
carefully crated before shipment.
The freight company takes full responsibility for the delivery of this
equipment in good condition, by accepting to deliver it.
- The manufacturer suggests reading this manual carefully.
- The bread slicer is manufactured with first quality materials by experienced technicians. Normal use and adequate maintenance will guarantee a reliable service for years to come.
- The bread slicer is available in four different slice thicknesses (1/2, 5/8, 3/4, and 1 inch).
- A nameplate fixed to the left side of the slicer specifies the serial number, model number, amperage, voltage and frequency.
- Drawings, electrical diagrams, and replacement part numbers are included in this manual
BEFORE USING THE BREAD SLICER, VERIFY THAT NOTHING OBSTRUCTS THE CHUTE
BLADE AND TIGHTEN THE GUIDE ADJUSTMENT.
1 YEAR PARTS AND LABOR WARRANTY
Within the warranty period, contact Omcan Inc. at
1-800-465-0234 to schedule an Omcan
authorized service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. The warranty covers
electrical and part failures, not improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components (cardboard, polyethylene, and others) are classified
as normal solid urban waste and can therefore be disposed of without
difficulty.
In any case, for suitable recycling, we suggest disposing of the products
separately (differentiated waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Technical Specification
Model| SB-CN-0025| SB-CN-0013| SB-CN-0019| SB-
CN-0016| SB-CN-0011
---|---|---|---|---|---
Power| 0.25 HP / 0.18 kW
Size| 1” / 25mm| 1/2” / 13mm| 3/4” / 19mm| 5/8” / 16mm| 7/16” / 11mm
Electrical| 110V/60/1
Weight| 176 lbs. / 79.8 kgs.
Packaging
Weight| 220 lbs. / 99.8 kgs.
Dimensions| 27” x 23.7” x 26.9” / 686 x 602 x 683mm
Packaging Dimensions| 47” x 36” x 41” / 1194 x 914 x 1041mm
Item Number| 44246| 44247| 44248| 44249| 44250
Installation
Open the crate and remove all materials used for packing as well as the accessories. Put the slicer on a stable table or counter and make sure the slicer is level. Each unit is set up to be used with the electrical supply specified on the nameplate fixed on the left side of the slicer.
Operation
- Make sure there are no obstructions in the chute.
- Adjust the side and top guide a 1/2 inch from each side of the bread and a 1/2 inch from the top.
- Use only cold bread in the slicer.
- Start the slicer with the main switch on the left side.
- Put the bread in the chute and by using the wood bread pusher exert pressure on the bread. When the bread comes out, remove it and put it on the bread bagger on the top of the slicer. Take a bag and insert it over the bagger and the bread; then remove them and close the bag.
WARNING: NEVER TRY TO PUSH OR PULL OUT THE BREAD WITH YOUR HANDS WHEN THE SLICER IS ON. ALWAYS DISCONNECT THE ELECTRIC CORD OR MAIN POWER BREAKER.
Maintenance
We recommend cleaning the slicer every day to prevent the accumulation of bread pieces. Use a small vacuum to clean the bread crumbs.
CHANGING BLADES
TO REMOVE THE BLADES
- Remove the top cover and the guide.
- Remove the exit chute.
- Remove the support angle on each side of the chute (10mm key).
- Unscrew bolt.
- Unscrew the bottom bolt on the blade frame.
- Turn the frame cam wheel with the v belt.
- Use the special tool to remove the blades one by one.
Tool sold separately, Item number 78617.
TO INSTALL THE NEW BLADES
- Use the special tool to install the blades one by one.
- Install the blade frame tighten the bottom bolt and make sure the frames are aligned.
- Install the angle support on each side of the chute (10mm key).
- Install the exit chute.
- Install the top cover and the guide.
Always cut off the main power before replacing any parts.
Troubleshooting
Problems
|
Solutions
---|---
The slicer does not turn on when powered.| Check if the electric cord is
connected.
Check the breaker of the building.
Check the breaker on the side of the slicer.
If the slicer is still not working, call a technician or us.
The slicer does not slice properly.| Make sure the bread is not hot.
Check if the blade is clean.
Check the guide adjustment.
If the slicer still does not slice properly, change the blade.
Parts Breakdown
Model SB-CN-0025 44246
Model SB-CN-0013 44247
Model SB-CN-0019 44248| Model SB-CN-0016 44249
Model SB-CN-0011 44250
---|---
Model SB-CN-0025 44246
Item No.
| Description| Position| Item No.| Description| Position| Item No.| Description|
Position
---|---|---|---|---|---|---|---|---
63586| Right Wall for 44246| 1| 63610| Lower Fixed Plate (Right) for 44246|
25| 63634| Screw M8x16 for 44246| 49
63587| Nut M10 for 44246| 2| 63611| Frame Fixed Rod for 44246| 26| 63635|
Washer Ø8 for 44246| 50
63588| Handle for 44246| 3| 63612| Bearing 6204 for 44246| 27| 63636| Nut M8
for 44246| 51
63589| Control Panel for 44246| 4| 63613| Plastic Base (Right) for 44246| 28|
63635| Washer Ø8 for 44246| 52
63590| Power Switch for 44246| 5| 63614| Blade Frame Fixed Ring for 44246| 29|
63635| Washer Ø8 for 44246| 53
63591| Plastic Handle for 44246| 6| 63615| Blade Frame Fixed Rod for 44246|
30| 63639| Screw M8x25 for 44246| 54
63592| Screw M8x20 for 44246| 7| 63616| Blade Frame Fixed Rod for 44246| 31|
63640| Pulley Shaft for 44246| 55
63593| Blade Frame Activity Lever for 44246| 8| 63617| Plastic Base (Left) for
44246| 32| 63641| Belt for 44246| 56
63594| Upper Blade Frame for 44246| 9| 63618| Washer for 44246| 33| 63634|
Screw M8x16 for 44246| 57
63595| Spring for 44246| 10| 63619| Plastic Bearing Connecting Rod for 44246|
34| 63643| Motor Pulley Shaft for 44246| 58
63596| Blade Frame Retainer for 44246| 11| 63620| Transmission Fixed Shaft for
44246| 35| 63644| Nut M22 for 44246| 59
14836| Blade for 44246| 12| 63621| Left Wall for 44246| 36| 63645| Front Cover
for 44246| 60
63598| Blade Dowel for 44246| 13| 63622| Acrylic Board for 44246| 37| 63646|
Upper Cover for 44246| 61
63599| Screw M6x16 for 44246| 14| 63623| Lower Fixed Plate (Left) for 44246|
38| 63606| Screw M6x12 for 44246| 62
63600| Fixed Rod for 44246| 15| 63624| Sliding Shaft for 44246| 39| 63648|
Fixed Angle Iron for 44246| 63
63601| Platen for 44246| 16| 63625| Screw M5x6 for 44246| 40| 63649| Fixed
Angle Iron for 44246| 64
63602| Fixed Rod for 44246| 17| 63626| Soft Hat M6 for 44246| 41| 63650| Fixed
Angle Iron for 44246| 65
63603| Upper Rod for 44246| 18| 63627| Screw M6x30 for 44246| 42| 63651|
Sloping Plate Retainer for 44246| 66
63604| Permanent Seat for 44246| 19| 63628| Plastic Base Attachment for 44246|
43| 63652| Tray Bar for 44246| 67
63605| Lower Blade Frame for 44246| 20| 63629| Motor Support (Back) for 44246|
44| 63653| Sloping Plate for 44246| 68
63606| Screw M6x12 for 44246| 21| 63630| Motor Support (Front) for 44246| 45|
63654| Width Fixing Plate for 44246| 69
63607| Holder for 44246| 22| 63631| Nut M20 for 44246| 46| 63655| Width Fixing
Plate for 44246| 70
63608| Holder Cover for 44246| 23| 63632| Screw Ø49 for 44246| 47| 20860|
Plastic Lock Bolt of Guides for 44246|
63609| Motor for 44246| 24| 63633| Pulley for 44246| 48| | |
Model SB-CN-0013 44247
Item No.
| Description| Position| Item No.| Description| Position| Item No.| Description|
Position
---|---|---|---|---|---|---|---|---
63586| Right Wall for 44247| 1| 63610| Lower Fixed Plate (Right) for 44247|
25| 63634| Screw M8x16 for 44247| 49
63587| Nut M10 for 44247| 2| 63611| Frame Fixed Rod for 44247| 26| 63635|
Washer Ø8 for 44247| 50
63588| Handle for 44247| 3| 63612| Bearing 6204 for 44247| 27| 63636| Nut M8
for 44247| 51
63589| Control Panel for 44247| 4| 63613| Plastic Base (Right) for 44247| 28|
63635| Washer Ø8 for 44247| 52
63590| Power Switch for 44247| 5| 63614| Blade Frame Fixed Ring for 44247| 29|
63635| Washer Ø8 for 44247| 53
63591| Plastic Handle for 44247| 6| 63615| Blade Frame Fixed Rod for 44247|
30| 63639| Screw M8x25 for 44247| 54
63592| Screw M8x20 for 44247| 7| 63616| Blade Frame Fixed Rod for 44247| 31|
63640| Pulley Shaft for 44247| 55
63593| Blade Frame Activity Lever for 44247| 8| 63617| Plastic Base (Left) for
44247| 32| 63641| Belt for 44247| 56
64297| Upper Blade Frame for 44247| 9| 63618| Washer for 44247| 33| 63634|
Screw M8x16 for 44247| 57
63595| Spring for 44247| 10| 63619| Plastic Bearing Connecting Rod for 44247|
34| 63643| Motor Pulley Shaft for 44247| 58
63596| Blade Frame Retainer for 44247| 11| 63620| Transmission Fixed Shaft for
44247| 35| 63644| Nut M22 for 44247| 59
14836| Blade for 44247| 12| 63621| Left Wall for 44247| 36| 63645| Front Cover
for 44247| 60
63598| Blade Dowel for 44247| 13| 63622| Acrylic Board for 44247| 37| 63646|
Upper Cover for 44247| 61
63599| Screw M6x16 for 44247| 14| 63623| Lower Fixed Plate (Left) for 44247|
38| 63606| Screw M6x12 for 44247| 62
63600| Fixed Rod for 44247| 15| 63624| Sliding Shaft for 44247| 39| 63648|
Fixed Angle Iron for 44247| 63
64298| Platen for 44247| 16| 63625| Screw M5x6 for 44247| 40| 63649| Fixed
Angle Iron for 44247| 64
63602| Fixed Rod for 44247| 17| 63626| Soft Hat M6 for 44247| 41| 63650| Fixed
Angle Iron for 44247| 65
63603| Upper Rod for 44247| 18| 63627| Screw M6x30 for 44247| 42| 63651|
Sloping Plate Retainer for 44247| 66
63604| Permanent Seat for 44247| 19| 63628| Plastic Base Attachment for 44247|
43| 64300| Tray Bar for 44247| 67
64299| Lower Blade Frame for 44247| 20| 63629| Motor Support (Back) for 44247|
44| 63653| Sloping Plate for 44247| 68
63606| Screw M6x12 for 44247| 21| 63630| Motor Support (Front) for 44247| 45|
63654| Width Fixing Plate for 44247| 69
63607| Holder for 44247| 22| 63631| Nut M20 for 44247| 46| 63655| Width Fixing
Plate for 44247| 70
63608| Holder Cover for 44247| 23| 63632| Screw Ø49 for 44247| 47| 20860|
Plastic Lock Bolt of Guides for 44247|
63609| Motor for 44247| 24| 63633| Pulley for 44247| 48| | |
Model SB-CN-0019 44248
Item No.
| Description| Position| Item No.| Description| Position| Item No.| Description|
Position
---|---|---|---|---|---|---|---|---
63586| Right Wall for 44248| 1| 63610| Lower Fixed Plate (Right) for 44248|
25| 63634| Screw M8x16 for 44248| 49
63587| Nut M10 for 44248| 2| 63611| Frame Fixed Rod for 44248| 26| 63635|
Washer Ø8 for 44248| 50
63588| Handle for 44248| 3| 63612| Bearing 6204 for 44248| 27| 63636| Nut M8
for 44248| 51
63589| Control Panel for 44248| 4| 63613| Plastic Base (Right) for 44248| 28|
63635| Washer Ø8 for 44248| 52
63590| Power Switch for 44248| 5| 63614| Blade Frame Fixed Ring for 44248| 29|
63635| Washer Ø8 for 44248| 53
63591| Plastic Handle for 44248| 6| 63615| Blade Frame Fixed Rod for 44248|
30| 63639| Screw M8x25 for 44248| 54
63592| Screw M8x20 for 44248| 7| 63616| Blade Frame Fixed Rod for 44248| 31|
63640| Pulley Shaft for 44248| 55
63593| Blade Frame Activity Lever for 44248| 8| 63617| Plastic Base (Left) for
44248| 32| 63641| Belt for 44248| 56
64301| Upper Blade Frame for 44248| 9| 63618| Washer for 44248| 33| 63634|
Screw M8x16 for 44248| 57
63595| Spring for 44248| 10| 63619| Plastic Bearing Connecting Rod for 44248|
34| 63643| Motor Pulley Shaft for 44248| 58
63596| Blade Frame Retainer for 44248| 11| 63620| Transmission Fixed Shaft for
44248| 35| 63644| Nut M22 for 44248| 59
14836| Blade for 44248| 12| 63621| Left Wall for 44248| 36| 63645| Front Cover
for 44248| 60
63598| Blade Dowel for 44248| 13| 63622| Acrylic Board for 44248| 37| 63646|
Upper Cover for 44248| 61
63599| Screw M6x16 for 44248| 14| 63623| Lower Fixed Plate (Left) for 44248|
38| 63606| Screw M6x12 for 44248| 62
63600| Fixed Rod for 44248| 15| 63624| Sliding Shaft for 44248| 39| 63648|
Fixed Angle Iron for 44248| 63
64302| Platen for 44248| 16| 63625| Screw M5x6 for 44248| 40| 63649| Fixed
Angle Iron for 44248| 64
63602| Fixed Rod for 44248| 17| 63626| Soft Hat M6 for 44248| 41| 63650| Fixed
Angle Iron for 44248| 65
63603| Upper Rod for 44248| 18| 63627| Screw M6x30 for 44248| 42| 63651|
Sloping Plate Retainer for 44248| 66
63604| Permanent Seat for 44248| 19| 63628| Plastic Base Attachment for 44248|
43| 64304| Tray Bar for 44248| 67
64303| Lower Blade Frame for 44248| 20| 63629| Motor Support (Back) for 44248|
44| 63653| Sloping Plate for 44248| 68
63606| Screw M6x12 for 44248| 21| 63630| Motor Support (Front) for 44248| 45|
63654| Width Fixing Plate for 44248| 69
63607| Holder for 44248| 22| 63631| Nut M20 for 44248| 46| 63655| Width Fixing
Plate for 44248| 70
63608| Holder Cover for 44248| 23| 63632| Screw Ø49 for 44248| 47| 20860|
Plastic Lock Bolt of Guides for 44248|
63609| Motor for 44248| 24| 63633| Pulley for 44248| 48| | |
Model SB-CN-0016 44249
Item No.
| Description| Position| Item No.| Description| Position| Item No.| Description|
Position
---|---|---|---|---|---|---|---|---
63586| Right Wall for 44249| 1| 63610| Lower Fixed Plate (Right) for 44249|
25| 63634| Screw M8x16 for 44249| 49
63587| Nut M10 for 44249| 2| 63611| Frame Fixed Rod for 44249| 26| 63635|
Washer Ø8 for 44249| 50
63588| Handle for 44249| 3| 63612| Bearing 6204 for 44249| 27| 63636| Nut M8
for 44249| 51
63589| Control Panel for 44249| 4| 63613| Plastic Base (Right) for 44249| 28|
63635| Washer Ø8 for 44249| 52
63590| Power Switch for 44249| 5| 63614| Blade Frame Fixed Ring for 44249| 29|
63635| Washer Ø8 for 44249| 53
63591| Plastic Handle for 44249| 6| 63615| Blade Frame Fixed Rod for 44249|
30| 63639| Screw M8x25 for 44249| 54
63592| Screw M8x20 for 44249| 7| 63616| Blade Frame Fixed Rod for 44249| 31|
63640| Pulley Shaft for 44249| 55
63593| Blade Frame Activity Lever for 44249| 8| 63617| Plastic Base (Left) for
44249| 32| 63641| Belt for 44249| 56
64305| Upper Blade Frame for 44249| 9| 63618| Washer for 44249| 33| 63634|
Screw M8x16 for 44249| 57
63595| Spring for 44249| 10| 63619| Plastic Bearing Connecting Rod for 44249|
34| 63643| Motor Pulley Shaft for 44249| 58
63596| Blade Frame Retainer for 44249| 11| 63620| Transmission Fixed Shaft for
44249| 35| 63644| Nut M22 for 44249| 59
14836| Blade for 44249| 12| 63621| Left Wall for 44249| 36| 63645| Front Cover
for 44249| 60
63598| Blade Dowel for 44249| 13| 63622| Acrylic Board for 44249| 37| 63646|
Upper Cover for 44249| 61
63599| Screw M6x16 for 44249| 14| 63623| Lower Fixed Plate (Left) for 44249|
38| 63606| Screw M6x12 for 44249| 62
63600| Fixed Rod for 44249| 15| 63624| Sliding Shaft for 44249| 39| 63648|
Fixed Angle Iron for 44249| 63
64306| Platen for 44249| 16| 63625| Screw M5x6 for 44249| 40| 63649| Fixed
Angle Iron for 44249| 64
63602| Fixed Rod for 44249| 17| 63626| Soft Hat M6 for 44249| 41| 63650| Fixed
Angle Iron for 44249| 65
63603| Upper Rod for 44249| 18| 63627| Screw M6x30 for 44249| 42| 63651|
Sloping Plate Retainer for 44249| 66
63604| Permanent Seat for 44249| 19| 63628| Plastic Base Attachment for 44249|
43| 64308| Tray Bar for 44249| 67
64307| Lower Blade Frame for 44249| 20| 63629| Motor Support (Back) for 44249|
44| 63653| Sloping Plate for 44249| 68
63606| Screw M6x12 for 44249| 21| 63630| Motor Support (Front) for 44249| 45|
63654| Width Fixing Plate for 44249| 69
63607| Holder for 44249| 22| 63631| Nut M20 for 44249| 46| 63655| Width Fixing
Plate for 44249| 70
63608| Holder Cover for 44249| 23| 63632| Screw Ø49 for 44249| 47| 20860|
Plastic Lock Bolt of Guides for 44249|
63609| Motor for 44249| 24| 63633| Pulley for 44249| 48| | |
Model SB-CN-0011 44250
Item No.
| Description| Position| Item No.| Description| Position| Item No.| Description|
Position
---|---|---|---|---|---|---|---|---
63586| Right Wall for 44250| 1| 63610| Lower Fixed Plate (Right) for 44250|
25| 63634| Screw M8x16 for 44250| 49
63587| Nut M10 for 44250| 2| 63611| Frame Fixed Rod for 44250| 26| 63635|
Washer Ø8 for 44250| 50
63588| Handle for 44250| 3| 63612| Bearing 6204 for 44250| 27| 63636| Nut M8
for 44250| 51
63589| Control Panel for 44250| 4| 63613| Plastic Base (Right) for 44250| 28|
63635| Washer Ø8 for 44250| 52
63590| Power Switch for 44250| 5| 63614| Blade Frame Fixed Ring for 44250| 29|
63635| Washer Ø8 for 44250| 53
63591| Plastic Handle for 44250| 6| 63615| Blade Frame Fixed Rod for 44250|
30| 63639| Screw M8x25 for 44250| 54
63592| Screw M8x20 for 44250| 7| 63616| Blade Frame Fixed Rod for 44250| 31|
63640| Pulley Shaft for 44250| 55
63593| Blade Frame Activity Lever for 44250| 8| 63617| Plastic Base (Left) for
44250| 32| 63641| Belt for 44250| 56
64309| Upper Blade Frame for 44250| 9| 63618| Washer for 44250| 33| 63634|
Screw M8x16 for 44250| 57
63595| Spring for 44250| 10| 63619| Plastic Bearing Connecting Rod for 44250|
34| 63643| Motor Pulley Shaft for 44250| 58
63596| Blade Frame Retainer for 44250| 11| 63620| Transmission Fixed Shaft for
44250| 35| 63644| Nut M22 for 44250| 59
14836| Blade for 44250| 12| 63621| Left Wall for 44250| 36| 63645| Front Cover
for 44250| 60
63598| Blade Dowel for 44250| 13| 63622| Acrylic Board for 44250| 37| 63646|
Upper Cover for 44250| 61
63599| Screw M6x16 for 44250| 14| 63623| Lower Fixed Plate (Left) for 44250|
38| 63606| Screw M6x12 for 44250| 62
63600| Fixed Rod for 44250| 15| 63624| Sliding Shaft for 44250| 39| 63648|
Fixed Angle Iron for 44250| 63
64310| Platen for 44250| 16| 63625| Screw M5x6 for 44250| 40| 63649| Fixed
Angle Iron for 44250| 64
63602| Fixed Rod for 44250| 17| 63626| Soft Hat M6 for 44250| 41| 63650| Fixed
Angle Iron for 44250| 65
63603| Upper Rod for 44250| 18| 63627| Screw M6x30 for 44250| 42| 63651|
Sloping Plate Retainer for 44250| 66
63604| Permanent Seat for 44250| 19| 63628| Plastic Base Attachment for 44250|
43| 64312| Tray Bar for 44250| 67
64311| Lower Blade Frame for 44250| 20| 63629| Motor Support (Back) for 44250|
44| 63653| Sloping Plate for 44250| 68
63606| Screw M6x12 for 44250| 21| 63630| Motor Support (Front) for 44250| 45|
63654| Width Fixing Plate for 44250| 69
63607| Holder for 44250| 22| 63631| Nut M20 for 44250| 46| 63655| Width Fixing
Plate for 44250| 70
63608| Holder Cover for 44250| 23| 63632| Screw Ø49 for 44250| 47| 20860|
Plastic Lock Bolt of Guides for 44250|
63609| Motor for 44250| 24| 63633| Pulley for 44250| 48| | |
Electrical Schematics
Model SB-CN-0025 44246
Model SB-CN-0013 44247
Model SB-CN-0019 44248| Model SB-CN-0016 44249
Model SB-CN-0011 44250
---|---
Warranty Registration
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send it to the address specified below. You can also register online by visiting:
https://omcan.com/warranty-registration/
For mailing in Canada
Pour postale au Canada
Por Correo en Canadá
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5| For mailing in the US
Pour diffusion aux États-Unis
Por correo en los EE.UU.
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
---|---
or email to: service@omcan.com
Purchaser’s Information
Name:
Address:
City:
Province or State:
Postal or Zip:
Country:
Dealer from which Purchased:
Dealer City:
Dealer Province or State:
Invoice:
Model Name:
Model Number:
Machine Description:
Date of Purchase (MM/DD/YYYY):
Would you like to extend the warranty? Yes No
Company Name:
Telephone:
Email Address:
Type of Company:
Restaurant
Bakery
Deli
Butcher
Supermarket
Caterer
Institution (specify):
Other (specify):
Serial Number:
Date of Installation (MM/DD/YYYY):
Thank you for choosing Omcan
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American foodservice industry. Our success over these many years can be attributed to our commitment to strengthening and developing new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia, and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 5,000 globally sourced products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>