tuya Smart Curtain Robot User Guide

Smart Curtain Robot
User Guide

Parts List

When charging: the indicator light is red for charging, The indicator light is green when it is full

APP Connection Method

Download the “Tuya Smart or Smart Life” app, register, and log in

1. Click “+”, click to add device
2. Turn on Bluetooth and search for the smart curtain robot
3. Search for the smart curtain robot, click Add
4. Add successfully, click Next
5. Click Finish

Learning Method

1. Click above smart curtain robot
2. The initial installation position of the curtain robot is the curtain’s close state, click “start learning”.
3. Click “stop learning” after the curtain is fully opened.
4. Click “OK” after completing the learning.

Multi-function Settings

1. Control interface: fully open/pause/close that can be controlled, click the start ○ to enter the setting interface
2. Setting interface: set the temperature/light intensity to close, set the timing switch, the curtain robot needs to learn again if clicked to restore the initial  state
3. Light intensity setting interface: Set the light intensity to close as needed
4. Temperature setting interface: set the temperature to close as needed
5.  Timing setting interface: set the timing switch as needed

Gateway connection

1. Click the + sign to add equipment
2.  Click automatic discovery, click start search, search mesh to the gateway, click next
3.  Enter the WiFi password at home, and click OK, the connection is in progress, and it will automatically jump after the connection is completed.
4.  Click to add to the list
5.  Add smart curtain robot, click confirm
   Remarks: After the gateway is connected, it can be remotely controlled and connected to the smart speaker and voice control (turn off the Bluetooth of the mobile phone). The gateway needs a power supply.

https://ma3you.com/a/OvP2zgA/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>