ICE-WATCH 022096 Digit Ultra Light Blue Watch User Manual

June 12, 2024
Ice-Watch

ICE-WATCH-LOGO

ICE-WATCH 022096 Digit Ultra Light Blue Watch

Product Information

Product Name: Unknown
Manufacturer: ICE Universal Ltd
Water Resistance: 100m
Battery: CR2025

Product Usage Instructions

Important Notes:

  1. Never try to open the case or remove its back cover.
  2. Do not operate buttons underwater.
  3. If moisture appears inside the watch, have it checked immediately by your dealer to prevent erosion of metal parts.
  4. Avoid rough use or dropping the watch.
  5. Avoid exposing the watch to temperature extremes.
  6. Wipe the watch with a dry, soft cloth only. Avoid contact with chemical materials that can cause deterioration of plastic parts.
  7. Avoid wearing the watch in electromagnetic or static conditions.
  8. The information contained in this document belongs to ICE Universal Ltd and may not be reproduced without authorization.

General Functions:

  1. Use the Backlight: Press and hold C to illuminate the display for approximately 3 seconds.
  2. Display the Date: Press and hold D to display the Year, Month, and Date.
  3. Display the Alarm Time: Press and hold B.
  4. Turn On the Alarm and Chime: Press B once and D three times.
  5. Turn Off the Alarm and Chime: Press B once and D once.
  6. Display Dual Time for Other Time Zone: Press B three times.

Time Setting:

  1. Press and hold A until the seconds flash (indicating set mode).
  2. Press D to reset the seconds.
  3. Press B to change to the next selection.
  4. Press D to increase the number; press and hold to increase at high speed.
  5. Repeat steps 3 and 4 for the following selections in sequence: SECONDS > HOUR > MINUTES > YEAR > MONTH > DATE.
  6. Press A once to return to the time screen.

Alarm Time Setting:

(Instructions for Alarm Time Setting are not provided in the user manual)

Stopwatch:

  1. Press B once and A twice to enter the Stopwatch mode.
  2. Press D to start the stopwatch.
  3. To measure multiple split times, repeat steps 3 and 4.
  4. Press D to stop the stopwatch.
  5. Press A once and B twice to return to the time screen.

Dual Time:

(Instructions for Dual Time are not provided in the user manual)

ATTENTION

  1. Never try to open the case or remove its back cover.
  2. Do not operate buttons underwater.
  3. Should moisture appear inside the watch, have it checked immediately by your dealer. Otherwise it can cause erosion of the metal parts of the watch.
  4. Though the watch is designed to withstand normal use, you should avoid rough use or dropping the watch.
  5. Avoid exposing the watch to temperature extremes.
  6. Wipe the watch with dry, soft cloth only. Avoid allowing it to come into direct contact with chemical materials, which can cause deterioration of the plastic parts of the watch.
  7. Avoid to wear the watch in electromagnetic, static conditions.
  8. The information contained in this document belongs to ICE Universal Ltd and may not be reproduced without its authorisation.

WATER RESISTANT: 100m
BATTERY: CR2025

General functions

  1. USE THE BACKLIGHT: press and hold C to illuminate the display about 3 seconds
  2. DISPLAY THE DATE: press and hold D to display : Year, Month, Date
  3. DISPLAY THE ALARM TIME: press and hold B
  4. ON THE ALARM AND CHIME: press one time B and three times D
  5. OFF THE ALARM AND CHIME: press one time B and one time D
  6. DISPLAY DUAL TIME FOR OTHER TIME ZONE: press B three times

ICE-WATCH-022096-Digit-Ultra-Light-Blue-Watch-1

TIME SETTING

  1. Press and hold A until the seconds to flash (flashing indicated in set mode)

  2. Press D to reset the seconds

  3. Press B to change to the next selection

  4. Press D to increase the number, press and hold to increase at high speed

  5. Repeat step 3 and 4, the selection in the following sequence:
    SECONDS › HOUR › MINUTES › YEAR › MONTH › DATE

  6. Press one time A to return to time screen

ICE-WATCH-022096-Digit-Ultra-Light-Blue-Watch-2

In the «Time Setting Mode», press A to switch between 12/24H formats

ALARM TIME SETTING

  1. Press one time B to access the « Alarm Mode »
  2. Press A the hour to flash (flashing indicated in set mode)
  3. Press D to increase the hour, press and hold to increase at high speed
  4. Press B to select the minutes
  5. Press D to increase the minutes, press and hold to increase at high speed
  6. Press one time A and three times B to return to time screen

ICE-WATCH-022096-Digit-Ultra-Light-Blue-Watch-3

SNOOZE

  • The alarm sounds at present time each day for about 60 seconds
  • Press any button to break it

STOPWATCH

LAP TIME

  1. Press two times B to access the « Stopwatch Mode »
  2. Press D to start the stopwatch
  3. Press D again to stop the stopwatch
  4. Press A to reset the stopwatch
  5. Press one time A and two times B to return to time screen

ICE-WATCH-022096-Digit-Ultra-Light-Blue-Watch-4

SPLIT TIME

  1. Press two times B to access the « Stopwatch Mode »

  2. Press D to start the stopwatch

  3. Press A to display the split time, stopwatch timeing continues internally

  4. Press A to clear the split time and to continue time measurement
    Repeat step 3 and 4, you can measure the multi split time

  5. Press D to stop the stopwatch

  6. Press one time A and two times B to return to time screen

ICE-WATCH-022096-Digit-Ultra-Light-Blue-Watch-5

DUAL TIME

  1. Press three times B to access the « Dual Time Mode »
  2. Pess A the hour to flash (flashing indicated in set mode)
  3. Press D to increase the hour, press and hold to increase at high speed
  4. Press B to select the minutes
  5. Press D to increase the minutes (press once change 30 minutes)
  6. Press one time A and one time B to return to time screen

ICE-WATCH-022096-Digit-Ultra-Light-Blue-Watch-6

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals