StarTech VESA Mounting Bracket for NUC Thin Clients or Laptop Docking Stations User Guide
- August 30, 2024
- StarTech
Table of Contents
StarTech VESA Mounting Bracket for NUC Thin Clients or Laptop Docking
Stations
Product Specifications
- Product Name: VESA Compatible Mount for Docking Station, NUC, or Thin Client
- Product ID: DOCK-NUC-VESA-MOUNT
- Mounting Patterns: 40x40mm, 75x75mm, 100x100mm
- Warranty: 5-year warranty
FAQ
- Q: Are other non-StarTech.com Docking Stations compatible with this mount?
- A: Other non-StarTech.com Docking Stations may be compatible if they have a 40x40mm mounting pattern.
- Q: What should I do if the VESA mounting points at the back of my monitor are recessed?
- A: You can use the optional spacers (J) provided with the mount to accommodate recessed VESA mounting points.
- Q: Where can I find warranty information for this product?
- A: For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Overview
| Component| Function
---|---|---
1
| Device VESA Mounting Points| • VESA Compatible 75x75mm and 100x100mm
• Use to mount a NUC , Thin Client Computer , or other
VESA Compatible accessories
2
|
Mounting Slots
| • Use to mount StarTech.com Docking Stations , Thin Client Computer , or other VESA Compatible accessories
Note: Other non-StarTech.com Docking Stations may be compatible if they have a 40x40mm Mounting Pattern
• Long Mounting Slots are spaced 40mm between each other. Use to mount Docking Stations
• Short Mounting Slots are spaced 54.7mm vertically and horizontally. Use to mount a NUC or other compatible Thin Client computer without a VESA Mount Bracket
3| Monitor VESA Mounting Points| • VESA Compatible 75x75mm and 100x100mm
Package Contents
- VESA Adapter Mount For NUC (A) x 1
- M3 x 5mm Screws (B) x 4
- M3 x 16mm Screws (C) x 4
- M4 x 5mm Screws (D) x 4
- M4 x 12mm Screw (E) x 4
- M4 x 20mm Screws (F) x 4
- M5 x 12mm Screws (G) x 4
- M5 x 20mm Screws (H) x 4
- Washers (I) x 4
- Spacers (J) x 8
- Quick-Start Guide x 1
Requirements
For the latest requirements, please visit www.startech.com/DOCK-NUC-VESA- MOUNT
- Phillips head screwdriver
- (Optional) NUC or Thin Client specific VESA mount bracket
Installation
Attach a NUC or Compatible Thin Client
- Without a VESA Mount Bracket
- Note: Use two Screws on either the vertical or horizontal Short Mounting Slots.
- With a VESA Mount Bracket
Note: Use the specific Screws and VESA Mount Bracket that came with the NUC or Thin Client.
Attach a Docking Station
Attach the VESA Compatible Mount to a Monitor
Note: The Spacers (J) are optional. They may be necessary if the VESA Mounting Points at the back of the Monitor are recessed.
Warranty Information
- This product is backed by a 5-year warranty.
- For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.
Contacts
StarTech.com Ltd.
- 45 Artisans Crescent London, Ontario N5V 5E9 Canada
StarTech.com LLP
- 4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.
StarTech.com Ltd.
- Unit B, Pinnacle 15 Gowerton Road Brackmills, Northampton NN4 7BW United Kingdom
StarTech.com Ltd.
- Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
For additional self-service support options and community forums, please visit: www.StarTech.com/support