E-Collar PE-900 Advanced Remote Dog Training Owner’s Manual

Welcome to the World of E-Collar Technologies, Inc.
Pro Educator PE-900
Owner’s Manual
“Happiness is a Well Behaved Dog”

PE-900 Advanced Remote Dog Training

Welcome to the World of E-Collar Training Pro Educator 900 Series
E-Collar
Remote Education Collar

Dear valued customer,
Congratulations on the recent purchase of your E-Collar training system, We are confident that you will be pleased with the results achieved through the use of our e-collar training system. We have taken great care to incorporate numerous safety features to ensure a positive experience for both you and your dog.
To maximize your success, it is crucial to employ the lowest level of stimulation and approach the training process with patience and understanding. By applying gentle leash pressure and using a low level of stimulation, you will achieve the best outcomes, It is important for your dog to recognize the sensation from the stimulation as a means of communication, rather than something to be feared, It is recommended that the use of our training system be incorporated into a comprehensive training program. We suggest taking the time to familiarize yourself with the features and functions of your E-Collar before placing the collar on your dog.
Additionally, please consider subscribing to our YouTube and Facebook pages for educational resources on the proper use of e-collars.
We wish you the best of luck with your training endeavors and encourage you to reach out to us at any time for assistance.
This guide is designed to provide you with assistance on the fundamental functions, programming features, and contents of your E-Collar training system. For further information and support, please visit www.ecollar.com or reach out to us at customer- service@ecollar.com.
We encourage you to contact our esteemed customer service department for any inquiries you may have at 260-357-0051,

IMPORTANT NOTICE

This product is specifically designed for canine use only.
E-Collar Technologies, Inc. assumes no responsibility for any misuse of this product, including damages caused by dog bites and lost items.
Before using this product on aggressive dogs, it is advised to seek an evaluation by a professional trainer. It is not uncommon for aggressive dogs to associate the stimulation with the handler and potentially act against them. In some cases, dogs that are subjected to e-collar pressure during a fight may display redirected aggression and become even more aggressive.
The use of high levels of stimulation should only be considered as a last resort and in life-threatening situations. To avoid unintentionally stimulating your dog, it is recommended to keep the stimulation level below 5 when the product is not in use.
The effective range of your E-Collar training device may be influenced by various factors such as terrain, weather conditions, presence of trees or power lines, and potential interference from other wireless devices.
Positioning the transmitter for maximum range.
For optimal range, grasp the transmitter in a manner similar to holding a torch, such as the one held by the Statue of Liberty. Ensure that the antenna remains separate from your body and fingers at all times, as touching the antenna can significantly diminish the range.

CHARACTERISTICS

• Range: 1/2 Mile
• Seven Stimulation Modes Supported
• Momentary, Momentary Boost, Continuous, Continuous Boost, 1 Second Ramp, 2 Second Ramp, Instant Stimulation
• Vibration: Alternative to Stimulation (gives a vibration similar to a Cell Phone)
• Tone: Flat audible sound for up to 30 seconds
• Computer interface tool: allows you to change the settings on your PE 900 series E-Collar, customizing it for your dog’s specific needs. Vibration and Tone type can only be changed using the computer interface tool.
• Quick Charge Li-Polymer Batteries
• Convenient Intensity Dial for Quick Adjustment
• Stimulation Levels Adjustable from Oto 100
• Collar Receiver Light for locating your dog at night
• Lock and Set Stimulation Safety Feature
• User Adjustable Boosting Levels from 1 to 60 Levels
• Completely Water Resistant
• Convertible from 1-Dog model (900) to 2-Dog model (902) to 3-Dog (903)

PACKAGE CONTENTS

| Ergonomic Transmitter
---|---
| Collar Receiver + Strap
Pro Educator PE-900
Owner’s Manual
E-Collar Technologies, Inc.| Owner’s Manual
| Test Light
| Contact Point Tool
| 5/8″ and 3/4” Contact Points
| Lanyard
| Battery Charger
| Metal Belt Clip

DEVICE OPERATION

CHARGING THE BATTERIES

Indicator Light is blinking “Green” under normal operation.
solid “Red” when stimulation is applied.
blinking “Red” when recharging is required.
Do not allow the batteries to get hot or be fully discharged, store at room temperature and 50% capacity charge,

Transmitter Battery Charging
Receptacle and Rubber Cover| Collar Receiver Battery Charging
Receptacle and Rubber Cover
---|---

The indicator light will turn solid red during charge cycles and turn green if it is fully charged. (approximately 2 hours)
Your e-collar is equipped with Li-Polymer batteries that need specific attention to ensure their longevity. It is advisable to avoid fully discharging the battery. In the event of complete discharge, please recharge it promptly to prevent irreversible damage. Additionally, please keep the units away from excessive heat and cold temperatures.

TURNING YOUR E-COLLAR ON/OFF

• To turn the Collar Receiver On or Off:
  Place the small red dot on the Transmitter to the small red dot on the Collar Receiver.

• To turn the Collar Receiver On or Off:

CORRECTLY FITTING COLLAR

The collar should be adjusted to allow the “contact points” to have direct contact with the skin. You should be able to fit a couple of fingers between the collar strap and your dog’s skin.
Too tight poses the risk of skin irritation and discomfort. Too loose and the contact points will not be able to administer the stimulation reliably and can cause skin irritation due to chafing. Short hair breeds may need the 3/8″ microprobes offered as an accessory item, contact customer service for details. The optimal position for the collar receiver is on either side of the dog’s windpipe.
If the factory installed 5/8″ contact points are not making good contact due to thick fur, see page 24 for changing contact points.

IMPORTANT NOTICE
To prevent the occurrence of skin irritations the Collar Receiver should never be worn for more than 12 hours per day. Should your dog experience skin irritations from over exposure to the contact points remove the collar receiver unit immediately and stop using your e-collar until all skin irritations are completely healed. Antibiotic ointment will aid in the healing process. Some dog breeds have extra thick fur or extra short fur that requires special contact points. Please contact our customer service or visit www.ecollar.com for more information.

THE LCD DISPLAY DESCRIPTION

duration
C| Continuous Stimulation| Sends stimulation continuously up to 10 seconds.
C+| Continuous Boost Stimulation| Sends stimulation countinuously up to 10 seconds,
R| 1 Second Ramp Stimulation| Stimulation ramps from 10 to stimulation level
R+| 2 Second Ramp Boosted Stimulation| Stimulation ramps from 10 to boosted stimulation level
I| Instant Stimulation Mode| Gives Continuous Stimulation up to 45 seconds follows by Volume Dial Volume Dial must be 0 to activate
V| Vibration| Vibrate up to 30 seconds
T| Tone| Flat sound up to 30 seconds
| Boost Level Setting| Set up Boost Level. Default is 5
| Night Tracking Light| Tum ON/OFF Night Tracking Receiver Light
| Lost Transmitter| 6 Hours Timer for Tranmitter
| Pairing Collar Receivers| Replace/Add Receivers
| Multi Dog System Indicator| Display cureent Dog system
| Stimulation Level Indication| 0 to 100 Stimulation Level
| Battery Indicator| Indicates Transmitter Battery Level

PROGRAMING STIMULATION BUTTONS

You have the option to program any stimulation mode to the s1, s2, s3, and S4 buttons.

1. Press and hold the P button until PR is displayed.
2. Continuously press any one of S1~S4 buttons until the desired stimulation mode is displayed.
3. The stimulation mode will proceed to change accordingly :
4. Continually follow steps 1 to 3 to program the remaining buttons.
5. At any given moment, press the P button to exit the Programming mode,

CO M P U T E R INTERFACE TOOL

With  the computer  interface  tool,  you have the ability to modify the settings  on your PE 900 series  E-Collar to customize  it  to suit your dog’s unique requirements.
To make adjustments  to the Vibration  and Tone type,  you will need to utilize  the computer  interface  tool,  which  is conveniently  accessible for download  at www .ecollar.com. Please  note that this program  is  most compatible  with windows  OS and 32-bit  Java.

• Multi-Dog Selection:
  Quick and easy selection of one, two or three dog modes.

• Button Selection Drop downs.
  Convenient drop down for each control  button provide quick and easy selection of the desired sensation.

• Level Lock :
  Ability to lock the level preventing accidental over stimulation by inadvertent movement of the dial

• Boost Level :
  Allows  the user to select a level  between  1    and 60 which  provides  for an emergency  boost of the stimulation  level,  great for he times when the working  level  is  ignored  by the dog  due to  a high distraction
  Selection  of “I  Mode” feature to limit the stimulation  or allow full access to all 100  levels

• Selection  of Vibration  –7 Types  :
  H| High Constant Vibration
  ---|---
  M| Medium Constant Vibration
  L| Low Constant  Vibration
  TS-H| High Tapping Sensation -1 second on and 1    second off
  TS-M| Medium Tapping Sensation –1  second on and 1   second off
  TS-L| Low Tapping Sensation -1  second on and 1   second off
  TA| Two seconds of constant medium vibration followed by continuous stimulation; commonly known as Classical or Pavlovian Conditioning

• Selection  of Tone – 4 Types  :
  H| High ConstantTone
  ---|---
  M| Medium Constant Tone
  L| Low Constant Tone
  PA| PA Two seconds of constant medium tone followed by continuous stimulation; commonly known as
  Classical or Pavlovian Conditioning

INSTANT STIMULATION

This unique mode eliminates the surprise of the stimulation “shock” found when applying levels above 30 to a dog in training. The stimulation can only be applied by starting at zero and turning the dial up on the dog until the desired response and/or compliance are achieved.  It also is very convenient for the user as the dial only needs to be turned and no buttons need to be pushed once the “ I ” mode is activated.
Great for boundary training, aggressive dog aversion training, IPO sport training, and many other situations that requires precision control and pressure.

T o  Program S t i m u l a t i o n Mode (I-Mode)

1. Press and hold the P button until PR is displayed.

2. Press any one of S1-S4 buttons repeatedly until I  mode is shown.

3. Stimulation mode will change as follow
   

4. Press P to exit the Programming mode.

N O T E : I-Mode  provides stimulation  for up to 45 seconds or until  you have  dialed  back  down  to O  or turned  off I-mode by pressing  the  set button  again.

1. To Use the I   mode, program Instant stimulation mode to one of your stimulation buttons.
2. To activate turn dial to O and press button set to I   mode. You will see [On] icon.
3. Turn Volume Dial to activate stimulation. Stimulation increases/decreases as dial is rotated.
4. Stimulation will automatically shut down after 45 seconds. Change stimulation level to O level will reset the 45 seconds safety timer.
5. Press assigned Stimulation Button to turn off Instant Stimulation.

HOW TO FIND THE PROPER STIMULATION  LEVEL

Rotating the dial counter-clockwise increases the stimulation level,  and rotating the dial clockwise lowers the stimulation level.
It is highly recommended that the user practices changing  levels and modes before putting the collar receiver on a dog.
Setting the correct stimulation level for your dog is very important. To set your “conditioning” stimulation level, correctly put the collar receiver on your dog (see page 9 for  instructions).  Let the dog get used to the collar receiver for a couple of hours.

While watching your dog, turn the level to “0” and press the continuous stimulation button. Slowly turn the stimulation up at a rate of approximately 2-3 levels per second. When your dog first perceives the stimulation,  usually between 5 and 20,  release the button. This is your “conditioning” stimulation level. You may need to increase the “conditioning” level a few levels to get your dog to respond at first, some dogs are more stubborn and need more stimulation. The boosted level  is typically 5 to 20 levels higher than the “conditioning” level.

LOOK/UN LOOK THE STIMULATION  LEVEL

Lock the s t i m u l a t i o n |wvw| to protect from unexpectes high  level stimulation.

1. Press and hold the P button until is displayed.
2. Press any one of S1-S4 buttons repeatedly to select either Mor C .
3. Use volume dial to change stimulation level to desired level ro lock.
4. Press and hold same stimulation button until 1  icon on LCD changes from blinking to solid.
5. Press  P button to exit from the Programming  Mode.
6. Repeat step 1-5 to unlock the stimulation leve

I m portant N o tice: When Simulation  is locked,  Stimulations level will not charge  shen the button is  pressed even though the displayed   stimulation  may charge.

Tracking Night Light

The Pro 900 E-Collar offers a Tracking Night Light feature,  allowing the user to choose between a constant bright light or a flashing  bright light on the dog’s collar receiver. This feature enhances visibility around the dog and helps to track their movements more easily at night.

1. Press and hold the P button until the PR is displayed.
2. Press the ON/OFF button two times,  check  [ ] icon  at LCD.
3. Press any one of S1-S4 buttons to activate.
4. Receicer light will change  OFF -→  Blinking  -→  Solid,  when you press S1-S4  each time.
5. Press the P button to exit the programming mode.
   

I m po rtant Notice : Exiting programming mode does not automatically disable the Night Tracking  Light.  Utilizing  this feature can significantly drain the collar receiveris  battery.

HOW TO SET THE BOOST

Boosted Stimulation adds the set boost level to the stimulation level, great for those situations when your dog does not respond to the “conditioning” level.  Determining the Boosted stimulation level  is a little more difficult than stimulation level setting due to the wide differences in temperaments and stimulation tolerance among the many breeds of dogs.  On average,  it is normally 5 to 20 levels higher than the “conditioning” level.  It is important to have it set high enough to get the desired response from your dog.

1. Press and hold the P button  until the PR is displayed.
2. Press the ON/OFF button once and verify the [ + I i c o n on t h e L C D .
3. U se the volume d i a l to adjust to the d e s i r e d boost level  and press S1  to save.
4. Press the P button to ex i t the programming m o d e .
   

LOST TRANSMITTER MODE

The Pro 900 E-Collar transmitter gives users the option to activate a timer for a duration of 6 hours. When the time is up, the transmitter will emit a beeping sound,  making  it easier to locate.
It is important to activate the Lost Transmitter mode before embarking on a hike or engaging in activities where misplacing the transmitter is a possibility.

1. Press and hold P button until PR is  displayed.
2. Press ON/OFF button three times, check  [ ] icon  on LCD.
3. Press any one of S1-S4 buttons to start alarm timer.
4. Transmitter LCD shows [ ] when activated,  followed  by confirmation  tone,  and icon  will remain on LCD until  alarm goes OFF.
5. Press P button to exit from the programming mode.
   

REPLACE/ADD COLLAR

Occasionally,  it  is  necessary  to pair/sync  a transmitter to a collar receiver.

1
D
O
G| 1.  Turn on the Transmitter
2.  Turn intensity dial to 0″
3.  Make sure the collar receiver is turned off.
4.  Press and hold the P button until  PR is displayed.
5.  Press the On/Off button four times, until the ee icon is on LCD.
6.  Put the Transmitter’s Red Dot against the Collar Receiver’s Red Dot for more than 5 seconds, green light on receiver will flash rapidly.
7.  Pull apart and immediately press the S1  button, you should hear a confirmation sound from collar receiver.
---|---
2
D
O
G| 1.  Turn on the Transmitter
2.  Turn intensity dial to “O”
3.  Make sure the collar receiver is turned off.
4.  Press and hold the P button until  PR is displayed.
5.  Press the On/Off button four times, until the e-e  icon is on LCD.
6.  Put the Transmitter’s Red Dot against the Collar Receiver’s Red Dot for more than 5 seconds, green light on receiver will flash rapidly.
7.  Pull apart and immediately press the S1  button, you should hear a confirmation sound from collar receiver.
3
D
O
G| 1.  Turn on the Transmitter
2.  Turn intensity dial to 0″
3.  Make sure the collar receiver is turned off.
4.  Press and hold the P button until  PR is displayed.
5.  Press the On/Off button four tirnes, until the e-o icon is on LCD.
6.  Put the Transmitter’s Red Dot against the Collar Receiver’s Red Dot for more than 5 seconds, green light on receiver will flash rapidly.
7.  Pull apart and immediately press the S1  button, you should hear a confirmation sound frorn collar receiver.

MULTl  DOG SYSTEM

The Pro 900 Educator is a versatile dog training system that can control up to 3 dogs. To switch  between a 1   Dog System, 2 dog system, or 3 dog system, simply press the ON/OFF button and S1  button simultaneously.

Stimulation  buttons work diffrent while multi  dog System

Stimulation  buttons for multiple dogs

| 1 Dog System| 2 Dog System| 3 Dog System
---|---|---|---
S1-Button| Dog 1| Dog 1| Dog 1
S2-Button| Dog 1| Dog 2| Dog 3
S3-Button| Dog 1| Dog 1| Dog 1
S4-Button| Dog 1| Dog 2| Dog 2
Icon| Description| Action
---|---|---
M| Momentary Stimulation| Send Single Stimulation  in short duration
M+| Momentary Boost Stimulation| Send boosted single stimulation  in  short duration
C| Continuous Stimulation| Sends stimulation continuously up to 10  seconds.
C+| Continuous Boost Stimulation| Sends stimulation  countinuously up to 10 seconds.
R| 1   Second Ramp Stimulation| Stimulation  ramps from  10  to stimulation level
R+| 2 Second  Ramp Boosted  Stimulation| Stimulation  ramps from  10  to boosted stimulation  level
I| | Gives Continuous  Stimulation  up to 45 seconds  follows  by Volume  Dial Volume  Dial must be O  to activate
V| | Vibrate  up to 30 seconds
T| Tone| Flat sound up to 30 seconds
+| Boost Level  Setting| Set up Boost Level.  Default is  5
| Night Tracking Light| Turn ON/OFF Night Tracking  Receiver  Light
| Lost Transmitter| 6 Hours Timer for Tranmitter
| Pairing Collar Receivers| Replace/Add  Receivers
| Multi  Dog System  Indicator| Display cureent  Dog system
| Stimulation  Level  Indication| 0 to 100 Stimulation  Level
| Battery Indicator| Indicates  Transmitter  Battery  Level

BUTTON FUNCTIONS

P ro g r a m i n g Stimulation  Buttons in a multi  dog  programing
You have the option to program any stimulation  mode to the S1, S2, S3, and S4 buttons.

Default Stimulation  buttons for Multi Dog System

1. Depress and hold the P button until PR is displayed.
2. Continuously press any one of S1-S4 buttons until the desired stimulation mode is displayed.
3. The stimulation mode will proceed to change accordingly :
4. Continually follow steps 1  to 3 to program the remaining  buttons.
5. At any given moment, press the P button to exit the Programming mode.
   

LOCK/UNLOCK THE STIMULATIONLEVEL

1. Press and hold the P button until is displayed.

2. Press any one of the S1-S4 buttons repeatedly to select either M or C.

3. Use the volume dial to adjust the stimulation leve

4. Press and hold same stimulation button until   1/2/3 icon on
   LCD will changes from blinking to solid.

5. Press P button to exit from the Programming Mode.

6. Repeat step 1  to 5 to unlock the stimulation leve

I m portant N o tice: When Stimulation  is locked, Stimulation level will not change even though you change the Volume Dial

BOOST LEVEL SETUP

T w o Button B o o s t
When utilizing a 2-dog or 3-dog system,  there is  a  more convenient method for activating  Boosted stimulation.  Instead  of adjusting the Boosted stimulation directly on the stimulation  button,  it can be achieved through the combination  of two buttons. Please note that this particular feature is only compatible  with  Momentary and Continuous modes.

1. Press the stimulation button, either in  a momentary or continuous.
2.  Prior to releasing the stimulation button,  simultaneously  press either above or beneath the stimulation button for an enhanced stimulation experience.
   

W a rn i n g Mode
Warning Mode is  an exclusive feature available only on the 3 Dog System. In  this mode,  the Stimulation  Modes of all  dogs will  be automatically adjusted to Vibration. This feature is  suggested  for situations where there is  limited  time to switch  between Stimulation modes.

1. Press the P button to activate the Warning Mode.
2. Following a single beep, all stimulation modes of S2,  S3,  S4,  except for the tone, will switch to vibration  automatically.
3. In order to exit the warning mode,  simply press the P button once more.
4. After two beeps, all stimulation modes will revert back to their previous preset settings.

TESTING YOUR E-COLLAR

If you need to check your unit, hold the test light against the contact points on the collar receiver. This test will let you know that the collar receiver is generating the proper sensation to the dog,  it should brighten in a smooth fashion as the dial  is turned up.
Some people find it easier to hold the collar receiver on their forearm while slowly turning the stimulation up using the continuous mode, typically as humans we will  begin to feel the simulation around a level 8 to 25 depending on the dryness of the skin.

Feel free to contact us if you have need help, 1-260-357-0051.

REPLACING THE CONTACT POINTS

The standard 5/8″ contact points are typically used for the majority of dogs. However,  breeds with thicker fur may require the longer 3/4″ contact points. To replace the 5/8″ contact points,  please refer to the enclosed contact point tool and follow the instructions provided.

1. Loosen   both  contact  points  by rotating  the contact point counter-clockwise  using the contact  point tool.
   

2. Install the 3/4″  contact  points onto the  bolt and  tighten  the contact points by rotating them  clockwise  with  the contact  point tool.
   

• For short haired breeds such as boxers, dachshund,  pit bulls,  etc, and thick-furred breeds, we kindly request you to visit our website or get in touch with us for information  regarding special contact options for your canine companion.

TRAINING TIP

I M P O R T A N T TRAINING TIPS
E-Collars can be utilized to reinforce commands that your dog already knows or as a learning tool when combined with leash pressure.  It should be noted that they are not intended to replace basic leash obedience  training,  but rather to enhance your ability to communicate with your dog.  For optimal outcomes,  it is recommended to utilize the minimal amount of stimulation necessary to capture your dog’s attention. A composed  and consistent approach to training will consistently yield better long-term results.  It is strongly advised that owners of aggressive dogs consult a professional trainer for evalua• tion prior to incorporating an e-collar. Various e-collar training techniques  are recommended by different professional trainers. We believe that as the owner, you are best equipped  to determine the most effective technique for your dog.  For first-time users, we suggest immersing yourself in learning about the proper techniques  or seeking the guidance  of a professional e-collar trainer. The method employed in initially introducing the e-collar is crucial to the success of the training.
You can find helpful training videos by searching for E-Collar Technologies on YouTube and subscribing to our channel, as we regularly post new content. Additionally,  please consider “Liking” our Facebook page to receive further training advice and connect with other e-collar users.

Good Luck with  your training from your friends at  E – C ol l a r T e c hn ol o gi e s

TROUBLESHOOTING

? M y R e ce i v e r / Transmitter is not turning on
A Make sure the Receiver has been charged.  We recommend device fully charge before use.
? M y Receiver is not responding
A Check Receiver’s indicator  light is  blinking green and Transmitter LCD to check device power.
A Check Receiver’s indicator  light is  red when you press any stimulation button.
A If you don’t see any red light, check your device using right Multi dog system.  For example,  if you have one dog,  you must small  1 i co n only at “Multi Dog system Indicator”  on LCD display.
B . If still Receiver not respond, Try pairing with Receiver one more time.

? I think r e ce i v e r g i v e s n o stimulation a t all
A Remove Contact points from Receiver.  Connect Test Light on the Receiver and try any stimulation.  If the test light  is  blinking,  receiver  is giving  stimulation.
? M ax r a ng e of device has been d e c re ase d
A Check Transmitter’s  battery condition.  Working range decrease if battery level  is  too low.
A Holing  position  is  important;  keep finger away from the antenna.
Touching the antenna by finger will greatly  reduce  the range.

? I wa n t t o reset the Transmitter as default
A Rotate Volume Dial  to 0,  press ON/OFF + S3 simultaneously for 6  sec.

CO NT A C T U S FOR EXPERT HELP WITH YOUR E-COLLAR

TWO YEAR WARRANTY

To register your product,  kindly visit our website at www.ecollar.com. Click on the warranty registration link and complete the necessary information. We kindly ask that you register your product within 30 days of your purchase.  If you are unable to access a computer, please feel free to contact one of our dedicated  customer service representatives at 1-260-357-0051. They will  be happy to assist you in registering your product.  If, for any reason, your product is not registered properly,  proof of purchase w i l l ** not be required to obtain warranty coverage. We w i l l ** be able to estimate your purchase date based on the serial  number. It is important to note that misuse, improper maintenance,  lost or stolen units, and dog damages are not covered under the manufacturer’s warranty. We strive for your complete satisfaction and aim to provide exceptional service.

“ M ak i n g Bad Dogs Good and Good Dogs Better!”

ACCESSORIES

w w w . ec o ll ar . c o m

SAFETY AND GENERAL INFORMATION

• The PE-900 Series Education Collar complies with all National and International Standards and Guidelines for human exposure to radio frequency electromagnetic energy.
• Nearly all electronic devices are susceptible to electromagnetic interference (EMI) if inadequately shielded or designed without precautions to EMI.
• PE-900 Series e-collar transmitters manufactured by E-Collar Technologies, Inc. comply with Article 15 of the FCC rules and operate under part 95 of FCC regulations.
• Operating Frequency Band is 27.095 MHz.

I M P O R T AN T NOTICE

1. To avoid Electromagnetic Interference and/or compatibility conflicts, please turn off your transmitter and collar receiver in any facility where posted notices instruct you to do so.  Never use your equipment  in close proximity of a Hospital or Health Care Facility or enter the facility without turning off both units.
2. An FCC license is not needed to operate PE-900 Series remote ecollar transmitters. However, any change or modification made to the transmitter, including the supplied  antenna, without the expressed written approval of E-Collar Technologies,  Inc.  could void your authority to operate.

I M P O R T A N T N O T I C E

N O T I C E
P o ss i b l e  Metal Allergy
Dogs vary in sensitivity and may develop symptoms of a metal allergy.
Which may include  irritation,  redness,  hair loss,  sores,  etc.
Please rotate collar receiver from side to side daily to check for allergies. If allergies  occur,  hypoallergenic  contact  points  are available for purchase  at   w w w . ec o ll a r . c o m **** or 260-357-0051

NOTICE TO PREVENT WATER DAMAGE
If Receiver is  exposed to water on a regular basis,  tighten screws once or twice a month  depending  on the frequency  of water exposure. Please make sure screws are snug but not overly tight.
This will help prevent internal water damage.

ITEM  SHOULD  BE PLACED OUT OF THE REACH OF CHILDREN
This  product is  not meant to be used by individuals  (including  children) with limited  physical,  sensory,  or cognitive  abilities,  or those lacking expertise  and understanding, unless they are under the supervision  or guidance  of a person responsible for their safety. This also applies to the cleaning and upkeep of the item.

The item  should exclusively  be used with the power supply (charger) provided with the product.

TECHNICAL SPECIFICATIONS

“Risk of fire or explosion if the battery is replaced by an incorrect type”
“Use an adapter that satisfies PS2 or LPS”

E – C o llar Technologies, Inc.
2120 Forrest Park Drive
Garrett,  IN  46738-1887
1-260-357-0051  (US & International)
s a l e s @ e c o ll a r . c o m
www . ec o ll a r . c o m
c u s t o m e r s e rv i ce @ e c o ll a r . c o m

Thank you for Supporting American  Workers _
_Copyright 2015 E-Collar Technologies,  Inc.
All  Rights  Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>