E-Collar Technologies LiPo 3.7V 300mAH Receiver Battery User Guide
- June 13, 2024
- E-Collar Technologies
Table of Contents
Receiver Battery Replacement Instructions
LiPo 3.7V 300mAH Receiver Battery
Remove 4 Screws using Philips or Torx 10 driver. Remove old battery by disconnecting the miniature connector.
Remove the cushion and attach it to the new battery.
Reinstall new battery and
reconnect the connector. Be careful to keep the wire away from transformer.
Be mindful not to pinch the wire
as seen in the figure below or broken wire may occur.
See the proper placement below.
Follow pattern below when
tightening the screws.
For Assistance Call 1-260-357-0051
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>