E-COLLAR BP-504 BarkLess Pro Rechargeable Instruction Manual
- June 12, 2024
- E-Collar
Table of Contents
E-COLLAR BP-504 BarkLess Pro Rechargeable
Product Information
The BP-504 Battery is a replaceable battery designed for use in a specific product. It provides power to the device and allows for uninterrupted operation.
Product Usage Instructions
- Using a Phillips or Torx 10 driver, locate and remove the four screws that secure the battery compartment.
- Disconnect the miniature connector that is attached to the old battery.
- Remove the old battery from the compartment.
- Take the new battery and place it in the compartment, ensuring it is positioned correctly.
- Reconnect the miniature connector to the new battery.
- When reconnecting, make sure to keep the wire away from the transformer to avoid any potential damage.
- Be careful not to pinch the wire while reconnecting, as this may cause a broken wire.
- Refer to the provided figure for proper placement of the new battery and connector.
- Tighten the screws in the pattern shown in the figure below to secure the battery compartment.
NOTE: If you require any assistance or have any questions, please call our customer support at 1-260-357-0051. Our support team is available to assist you. Please note that this information is valid until May – 2023.
INSTALLATION
- Using a Phillips or Torx 10 driver, remove four screws and disconnect the miniature connector to remove the old battery.
- Replace the old battery with a new one.
- Reinstall the new battery and reconnect the connector, taking care to keep the wire away from the transformer.
- Be careful not to pinch the wire, as shown in the figure below, to avoid causing a broken wire.
- Refer to the figure below for the proper placement.
- Follow the pattern below when tightening the screws.
Read User Manual Online (PDF format)
Loading......