E-Collar Receiver Battery Replacement Instructions
- October 30, 2023
- E-Collar
Table of Contents
E-Collar Receiver Battery Replacement
Product Information
Receiver Battery Replacement Instructions
The Receiver Battery Replacement Instructions guide the user through the process of replacing the battery in the receiver of a product. The instructions involve removing the old battery, attaching the cushion to the new battery, and carefully reinstalling the new battery while avoiding contact with the transformer and wire.
Product Usage Instructions
Receiver Battery Replacement
- Locate the receiver battery compartment on the product.
- Using a Philips or Torx 10 driver, remove the four screws that secure the battery cover in place.
- Disconnect the miniature connector to remove the old battery.
- Remove the cushion from the old battery and attach it to the new battery.
- Reinstall the new battery and reconnect the connector. Be careful to keep the wire away from the transformer.
- Ensure that the wire is not pinched during reinstallation, as this may cause a broken wire.
- Follow the pattern provided in the instructions when tightening the screws.
- Properly recycle the old battery.
If you need assistance with replacing your receiver battery, please call 1-260-357-0051 for help. The instructions are valid until May – 2023.
Installation Instructions
- Remove 4 Screws using Philips or Torx 10 driver. Remove old battery by disconnecting the miniature connector.
- Remove the cushion and attach it to the new battery.
- Reinstall new battery and reconnect the connector. Be careful to keep the wire away from transformer.
- Be mindful not to pinch the wire as seen in the figure below or broken wire may occur.
- See the proper placement below.
- Follow pattern below when tightening the screws.
For Assistance Call: 1-260-357-0051
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>