Itian V21 3 in 1 Magnetic Charging Station User Guide
- August 30, 2024
- Itian
Table of Contents
Itian V21 3 in 1 Magnetic Charging Station
Specifications:
- Compliance: FCC radiation exposure limits
- Recommended distance: Minimum of 20cm between the radiator and the user’s body
- Interference measures: Reorient or relocate the receiving antenna, increase separation, connect to a different circuit
Product Usage Instructions
Installation:
- Ensure the equipment is installed in a location where interference is minimal.
- If interference occurs, try reorienting or relocating the receiving antenna.
- Keep a minimum distance of 20cm between the radiator and your body during operation.
Operation:
- Power on the equipment and monitor for any interference with radio or television reception.
- If interference is detected, try the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to a different circuit than the receiver.
- Consult a dealer or experienced radio/TV technician for further assistance.
- Avoid co-locating or operating the transmitter in conjunction with any other antenna or transmitter.
Frequently Asked Questions (FAQ):
-
Q: What should I do if I experience interference with radio or television reception?
A: Try reorienting or relocating the receiving antenna, increasing separation, and connecting to a different circuit. If issues persist, consult a dealer or technician for help. -
Q: What is the recommended distance between the radiator and the user’s body?
A: A minimum distance of 20cm should be maintained between the radiator and the user’s body to comply with FCC radiation exposure limits. -
Q: Can the transmitter be co-located with other antennas or transmitters?
A: No, the transmitter must not be co-located or operated in conjunction with any other antenna or transmitter to avoid interference.
3 in 1 Magnetic Charging Station User Guide
Model:V21
Thank you for purchasing and using this product!
Please read this operation instruction carefully before using this product.
Product Specification
3 in 1 Magnetic Charging Station
- lnput:SV=3A/9V=3A/12V=2.SA
- Cell Phone Output: 15W (Max)
- Apple Watch Output: 3W
- AirPods Output: SW
Applicable Devices
- iPhone iPhone 15 / 14 / 13 / 12 Series
- AirPods AirPods Pro 2 / AirPods Pro AirPods 3 / AirPods 2
- Apple Watch Apple Watch Ultra, SE, 9-2
The list is of known existing models and will be compatible with subsequent new models
Blinking white LED light <luring wireless charging to indicate charging failure.
The following situations can cause failures, like charging slowly, stop charging, over-temperature for charging position
- The adapter is not rup to standard.
- The charging cable is not up to standard.
- The phone case is too thick ( within 2mm thickness phone case is recommended ).
- The built-in wireless charging receiver position is not coincide with wireless charger coil position.
- There is metal/magnet on the back of cell phone or phone case.
- Smartphone does not support wireless charging function.
Attention
- Please keep the charger away from water or other liquid.
- If you need to clean the charger, please make sure it is not connected to power supply.
- Operating temperature: -20-45’t.
Product Description
- 3 in 1 MagSafe Charger, a wireless charging stand solves the charging of 3 devices.
- Folding design, easy to carry when traveling.
Input
- Connect the wireless charger and adapter with the charging cable.
- Please use a PD 30W adapter so that the charging will enter the fast charging mode.
LED indicator light
- White LED: Standby.
- Blue LED light: Normal charging.
- Blinking white LED light: Abnormal charging.
Case Usage
FCC Requirement
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.