FORTIN 2024 Trax Push to start Installation Guide

REV.: 20240522
Guide # 112821
VEHICLE……………YEARS

2024 Trax Push to start

Vehicle functions supported in this diagram (functional if equipped)

70.[45]
GM MINIMUM| To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
---|---|---

monitoring
Program bypass option
(If equiped with OEM alarm):| D2| Unlock before / Lock after (Disarm OEM
alarm)
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| A11| OFF| Hood trigger (Output Status).
---|---|---|---
ATTENTION!| E5| OFF| SPECIAL FUNCTIONS: BY DEFAULT DEACTIVATED
ON| MANUFACTURED MODULES BETWEEN: 04/2018 TO04/2019

NOTE
**OEM Remote monitoring

| The vehicles OEM remote will not be operable during remote start.
---|---
| Parts required (Not included)
2X 1 Amp Diode (with Data-Link wiring only)

MANDATORY INSTALL

* HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

WIRING CONNECTION WITH DATA-LINK

DCRYPTOR PROGRAMMING PROCEDURE

KEY BYPASS PROGRAMMING PROCEDURE 2/2

REMOTE STARTER FUNCTIONALITY

| All doors must be closed.
---|---
| Remote start the vehicle.
| Unlock the doors with the remote-starter remote or the OEM remote.
| Insert and Turn the key to the Ignition ON/RUN position.
| Press the brake pedal.
| The vehicle can now be put in to gear and driven.

Module label

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

This guide may change without notice. See www.fortin.ca for latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC
ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Documents / Resources

| FORTIN 2024 Trax Push to start [pdf] Installation Guide
2024 Trax Push to start, 2024, Trax Push to start, Push to start
---|---
| FORTIN 2024 Trax Push to Start [pdf] Installation Guide
2024 Trax Push to Start, 2024, Trax Push to Start, Push to Start

References

• system.si

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>