cleverio GP120 Outdoor Remote Socket User Guide

: August 28, 2024
: Cleverio

Table of Contents

GP120 Outdoor Remote Socket
Product Information
Product Usage Instructions
FAQ
Use
Troubleshooting
Safety information
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GP120 Outdoor Remote Socket

Product Information

Specifications

Voltage: Standard
Max. load: As per user manual
IP rating: Weatherproof
Wifi: Yes
Size: Refer to user manual
Wireless frequency: Standard
Effective Radiated Power: Standard

Product Usage Instructions

Installation

Follow these steps to install the Outdoor Remote Socket:

Find a suitable outdoor location near a power source.
Ensure the socket is protected from direct exposure to water.
Plug the socket into the power source.

Pairing with Wifi

To connect the socket to your Wifi network:

Refer to the user manual for specific instructions on how to pair with Wifi.
Follow the on-screen prompts to complete the setup process

Operating the Socket

Once installed and connected, you can use the socket to remotely control outdoor devices. Follow these steps:

Download the designated app on your smartphone or device.
Open the app and locate the paired socket.
You can now turn on/off connected devices remotely using the app.

FAQ

Q: Can I use the Outdoor Remote Socket in extreme weather conditions?

A: The socket has a weatherproof rating, but it is recommended to avoid exposure to extreme weather conditions for prolonged periods.

Q: How far is the effective range of the Wireless frequency?

A: The effective range may vary based on environmental factors, but typically it covers a standard distance within a typical outdoor setting.

Item: 52191

Use

Connect to app

Find and install the app ‘Smart Life- Smart Living’ on the App Store or Google Play
Register an account in the app or log in to an existing one. Activate Bluetooth and location services on your device. Make sure the device is connected to your 2.4 GHz wifi.
Connect the smart plug to a wall outlet. Press and hold the power button for 3 seconds until the indicator flashes.
Press “+” or “Add device” in the app. The app searches for devices nearby. Choose to add the smart plug when found. Note: If the app does not find the smart plug, add it manually by selecting “Electrical” and add “Socket (BLE+Wi-fi)”.
If you are using the Smart life-Smart living account for the first time, enter your details for your 2.4 GHz wifi.
The app confirms when the smart plug is added successfully.

Note! The pairing procedure might change due to regular app updates. If the instruction does not correspond with the app interface, please visit
www.kjell.com/52191 -> “Support” for updated instructions.
Connect to voice assistant

Press the “Me” button in the app, navigate to “More services” and choose to connect the plug to either Amazon Echo, Google Home, or other voice assistant services

Factory reset
Press and hold the power button on the smart plug for 3 seconds until the LED indicator flashes.
Note! The smart plug will still be connected to your device and visible in the app. Remove it from the app separately to let future users install it in their app and account.

Troubleshooting

The smart plug cannot connect to the app.
Make sure your smartphone or tablet is connected to a 2.4 GHz wifi with a stable connection. If you have a dual-band router, your device can automatically connect to the 5 GHz wifi. In this case, your device cannot communicate with the smart plug. Disable the 5 GHz wifi in your router during the installation and try again. The app needs access to your device’s location services. Make sure you have allowed access to location services while using the app. Follow the “Connect to the app” instructions to add the smart plug to your home network.

The connection to the smart plug was lost.
If you recently changed to a new router or renamed your network you need to reinstall the smart plug again. Remove the product connection to your app by selecting it. Edit the device by pressing the pen symbol ” ” in the top right corner of the app. At the bottom of the page press “Remove Device”.
Reset the smart plug by following the instructions in “Factory reset”.
Follow the “Connect to the app” instructions to add the smart plug to your home network again.

Safety information

Caution! There is a difference between products using resistive load and inductive load which affects the maximum connected load this product can handle. Examples of products that are resistant to load are coffeemakers and lighting products. Max resistive load: 16 A (3680 W). Examples of products using inductive loads are washing machines, construction fans, and any type of motors. Max inductive load: 2.5 A (575 W). Exceeding these limits will cause the plug to stop working. Suitable for working temperatures from -20°C and up. Only for wall outlets, do not connect to an extension cord. Not suited for equipment that requires constant supervision, such as clothes iron. Do not stack wireless remote sockets on each other or use two receivers in proximity. Never attempt to disassemble the product. Repairs should only be performed by a qualified technician. By repairing it yourself there is a risk of electric shock and/or short circuit. The remote has an approximate range of 25 m, this range can vary greatly due to concrete walls, and electrical or electromagnetic sources that can interfere with the signal. Disconnect the sockets completely to ensure there is no voltage output. Simplified EU Declaration of Conformity Kjell & Company hereby declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at www.kjell.com/52191.