Cuisinart SG6U Rechargeable Seasoning Mill Electric and Paper Grinder Instruction Manual
- June 6, 2024
- Cuisinart
Table of Contents
Seasoning Mill SG6U / SG6BU / SG6PU / SG6SU
Congratulations on the purchase of your new Cuisinart Seasoning Mill.
For over 30 years Cuisinart’s aim has been to produce the very finest kitchen equipment. All Cuisinart products are engineered for exceptionally long life and designed to be easy to use as well as to give excellent performance day after day.
To learn more about our products and for recipe ideas visit our website www.cuisinart.co.uk
Product Control Guide
-
Measuring Cap
Grind directly into the cap – perfect for measuring quantities for a recipe. -
Removable Grinding Containers
Clear for easy viewing and hold large portions for fewer refills -
On/Off Button
Operates mill when pressed -
Charging Base
Plugs into mains outlet to charge the unit -
Grind Tray
Removable tray catches loose grinds for easy disposal -
Charge/Ready Light
Illuminates red when charging and blue when fully charged -
Adjustable Grind Dial
Choose from 5 set positions from coarse to fine -
Grind Directional Arrows
Indicates which direction to turn the adjustable grind dial for the desired setting
SAFETY INSTRUCTIONS
READ THESE SAFETY INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE!
-
Always follow these safety cautions when using this appliance to avoid personal injury or damage to the appliance. This appliance should be used only as
described within this instruction book. There is a risk of injury if the product is misused. -
The appliance is intended for domestic use only andis not intended to be used in applications such as staff kitchen areas in shops, offices, and another working environment; farm houses; by customers in hotels, motels, and other residential type environments; bed and breakfast type establishments.
-
This appliance contains batteries that cannot be replaced.
-
This appliance contains rechargeable batteries which must be removed before discarding the appliance. For further information on removing the batteries, contact Cuisinart. www.cuisinart.co.uk
-
This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Children should always be supervised to ensure that they do not play with this product.
-
This appliance shall not be used by children. Keep the appliance, power adapter, and charging base out of reach of children during and after use.
-
Do not use the appliance if the lead is damaged. In the event of lead damage, discontinue use immediately. If the lead is damaged it must be replaced by the manufacturer. No repair must be attempted by the consumer.
-
For the purposes of recharging the battery, only use the detachable charging supply unit provided with this appliance (model YLJXA-U065018). This
the symbol indicates there is a detachable power supply for means of charging. -
The appliance is not intended to be operated by means of an external timer or separate remote control system.
-
Always inspect the appliance and appliance accessories before use for noticeable signs of damage. Do not use if damaged, or if the appliance has been dropped.
-
Never pull the plug out of the mains socket by the lead.
-
Do not wrap the lead around the main body of the appliance during or after use.
-
Always ensure only the adapter supplied is used with the appliance.
-
The supply terminals are not to be short-circuited.
-
The charger should be plugged into an electrical socket away from a sink or any hot surface.
-
Do not use an extension cord. Plug the charger directly into an electrical socket.
-
Do not charge the unit using an outdoor socket.
-
To protect against electrical shock, do not put the main unit in water or other liquids. Only the attachments, of this appliance, have been designed for submersion in water or other liquids. Never submerge any other portion of this unit. If the appliance falls into a liquid, remove immediately, clean, and dry the unit thoroughly before continuing.
-
The appliance is safe to be left plugged into the electrical supply when not in use to ensure the batteries are always charged. However, the product should be
switched off and unplugged before cleaning, removing, or attaching the grinding containers to refill with salt, pepper, or spices, or when handling any parts that are intended to move. It should also be unplugged if not being used for a prolonged period of time. -
This product contains NiMH rechargeable 2.4V batteries that are not to be removed from the appliance for charging. The batteries in this appliance are non-replaceable by the end-user. Only an authorized engineer should perform this task for safety reasons.
-
This product complies fully with all appropriate EU and UK legislation and the standards relevant to this type and class of appliance. We are an ISO9001:2015 certified company that continually evaluates our Quality Management System performance. If you have any queries regarding product safety and compliance, please contact our Customer Services Department (see “U.K. After-Sales Service” section).
CAUTION: Polythene bags around the appliance or its packaging may be dangerous. To avoid any risk of suffocation, keep these bags out of reach of babies and children. These bags are not toys.
Disposing of electrical and electronic appliances at the end-of-life
In everyone’s interests and to actively participate in the collective effort to protect the environment:
- Do not discard your products with household waste.
- Use return and collection systems available in your area.
Some materials may be recycled or reused.
Instructions for Use
A ASSEMBLY
| |
---|---|---
-
Place housing and all removable parts on a clean, flat surface. Make sure that all parts have been cleaned and dried thoroughly before assembling.
-
Attach grinding container(s) to the unit housing.
NOTE: It is best to attach the grinding container from the bottom while holding the unit upright. -
Line up the arrow on the grinding container with the arrow on the unit housing.
NOTE: Both arrows should face each other. This will indicate the grinding container and unit are properly aligned. -
Gently push the grinding container and unit housing together. The grinding container will fit together comfortably with the unit housing.
-
Secure the grinding container in place by twisting the grinding container so that the arrow on the unit housing is now aligned with the lock symbol on the grinding container.
NOTE: The two pieces will click -
To attach the second grinding container, flip the unit housing over and repeat assembly instructions.
-
Your Cuisinart Seasoning Mill is now assembled.
For use with measuring cap:
- To use the measuring cap on either grinding container, grasp the measuring cap and connect to the grinding container by aligning the grooves on the measuring cup with the ridges in the grinding container.
- Press together until the ridge of the measuring cap rests flat against the grinding container.
NOTE: When not in use, the measuring cap should remain in the uppermost grinding container, as the unit housing will not fit into the charging base if the measuring cap is on the lower container.
To assemble charging base for use:
-
Place housing, charging base, and all removable parts on a clean, flat surface. Make sure that all parts have been cleaned and dried thoroughly before assembling.
-
Place the removable grind tray into the charging base so that it fits securely.
NOTE: The ground tray will only fit into the charging base one way. -
Connect the power adapter to the charging base by grasping the pin on the power adapter and inserting it vertically into the back of the charging base until secure.
NOTE: Do not insert a power adapter into the charging base while the power adapter is plugged into a power source.
B CHARGING INSTRUCTIONS
To charge your Cuisinart Seasoning Mill for use:
-
Follow the instructions under the Assembly section.
-
Grasp assembled unit securely and make sure it is facing upright. The Seasoning Mill is facing upright when the Cuisinart logo on the front of the unit is in proper reading orientation (easy to read and horizontal.)
-
Place the fully assembled Seasoning Mill in the charging base so that the recessed area on the back of the unit housing fits comfortably with the protrusion on the charging base.
-
Plug the charging base into a power socket. The unit is now charging for use.
NOTE: The unit is properly charging if the red LED illuminates the charging base. When the unit is fully charged, the LED indicator will change to blue.
NOTE: Before first use, the batteries must be charged for 12 hours.
C ADJUSTING THE GRIND
To adjust the grind from fine to coarse, use the adjustment dial on the
underside of the mill. Turn clockwise for a finer grind and anticlockwise for
a coarser grind, following the arrows on the mill.
D OPERATION INSTRUCTIONS
-
Assemble the Cuisinart Seasoning Mill as detailed in Section A.
-
Ensure the unit is fully charged as detailed in Section B
-
Hold the unit with the end that you wish to grind from facing downwards.
-
Press the On/Off button in the center of the unit housing to begin grinding.
NOTE: Only the bottom container will yield any grinding results. Even though the grinding container facing upward will rotate, no grinding will actually take place. -
To grind from the other end of the unit – simply flip the unit over.
E CHARGING & BATTERY LIFE
Your Cuisinart Seasoning Mill is equipped with NiMH batteries. We have
selected these batteries to give you maximum battery life and long running
times. Avoid wetting battery contacts. Before first use, the batteries must be
charged for 12 hours.
If batteries should run down completely, it will take between 8 and 12 hours to fully recharge them. Normally, you won’t run batteries down completely, since the running time with a full charge is up to 20 minutes. It varies depending on your usage, but most grinding tasks take around 5 seconds.
CONTINUOUS CHARGING
The unit is designed so that the batteries may remain on continuous charge. It is recommended that the Seasoning Mill charger be kept plugged into a wall socket so that the mill will always be ready to use. Leaving the unit on continuous charge is inexpensive in terms of the amount of electricity being used. Use only with the charger provided with the appliance. Do not attempt to use this charger with any other product. Likewise, do not attempt to charge this appliance with any other charger.
HOLDING THE CHARGE
The batteries hold most of their charge even when not plugged in and charging, losing only about 30% of the total charge per month.
SHORT RUN TIMES
If, after repeated use, the run time seems to get shorter and the Seasoning
Mill has less power, remove the plug from the wall outlet and continue to use
the mill until it is fully discharged and stops operating. Plug the base back
into a wall outlet and recharge the unit for 12 hours or overnight for a full
new charge. This procedure improves battery capacity and should be repeated
once every 2– 3 months to ensure optimum performance.
Cleaning & Maintenance
The appliance is safe to be left plugged into the electrical supply when not in use to ensure the batteries are always charged. However, the product should be switched off and unplugged before cleaning, removing or attaching the grinding containers to refill with salt, pepper, or spices, or when handling any parts that are intended to move. It should also be unplugged if not being used for a prolonged period of time.
-
Clean the mill and base by simply wiping all parts with a damp cloth and thoroughly drying. Do not expose the appliance to moisture.
-
Do not use detergents to clean it.
-
To clean the grinding chambers, simply unlock the container, remove and wash with warm soapy water. Dry thoroughly and replace.
-
To clear a peppercorn that is stuck in the grinding wheel you may either:
✓ Turn the mill upside down and shake gently while pressing the On/Off power button.
✓ Turn the mill upside down and position the grind selector to coarse, then hold over a plate and grind until peppercorn is dislodged. -
Never use moist or wet spices in the mill. This will clog the grinding mechanism. We recommend using only store-bought dried spices.
-
N.B Never immerse the full appliance in water, any other liquid, or place in a dishwasher.
In some instances, grinds can become lodged between the metal spindle in each of the grind containers and the main power unit. If this happens, the unit will not function. The motor will not start when the ON/OFF button is pressed.
To dislodge loose grinds, remove each of the removable grind containers in turn and shake the main power unit to release any loose grinds. There is no need to empty the containers. Replace the grind containers and use them as normal.
UK Guarantee
This appliance is guaranteed for consumer use for 3 years and is only valid within the United Kingdom.
This guarantee covers consumer use only i.e. defects occurring under normal use within the home from the date of purchase or date of delivery, whichever is later.
If the product develops a fault due to defects in materials or manufacturers within 12 months from the date of purchase, to avoid delays and unnecessary inconvenience, where possible please return the product to the point of purchase for an exchange.
If the product develops a fault due to defects in materials or manufacture after 12 months from the date of purchase, and within the guarantee period, Conair UK After Sales Service will repair or replace the product.
Exclusions
This guarantee will no longer be valid meaning that The Conair Group Ltd will not be liable to repair or replace your product where:
- The appliance has been used on a voltage supply other than that which is marked on the product, or advice within this instruction booklet
- The appliance has been purchased from an unauthorized stockist*
- The appliance is used for professional/non-domestic usage
- Repairs or alterations have been attempted by unauthorized persons
- The failure of the appliance is a direct result of misuse
- The failure is a result of not following the instructions for use
This guarantee does not cover any cosmetic damage due to misuse of the product nor any damage to persons or property that occurs because of product misuse.
*unauthorized stockists include, but are not limited to online auction sites, private sellers, and those selling second-hand goods, refurbished products, etc
Please contact the Conair Customer Care Line on 03702 406902 (09:00 to 17:00 Monday to Friday) or email support@cuisinart.co.uk for further information on authorized stockists.
It is important to retain your proof of purchase. We recommend attaching your receipt to this page.
Even where a refund may be applicable, no refund will be provided without a valid receipt or proof of purchase, we will only be able to offer a repair or replacement service. Please note this does not apply if the product was purchased directly from The Conair Group Ltd.
Guarantees on replacement products run from the original purchase date or date of delivery, whichever is later, and not from the date of replacement.
This guarantee is an additional benefit and does not affect your statutory rights as a consumer.
If you have any queries regarding this guarantee please contact the Conair Customer Care Line on 03702 406 902 (09:00 to 17:00 Monday to Friday) or email your inquiry to support@cuisinart.co.uk
The UK After Sales Service
For further advice on using the appliance or should you need to return your product, please contact the Conair Customer Care Line on 03702 406 902 (09:00 to 17:00 Monday to Friday) or email your inquiry to support@cuisinart.co.uk
Return address:
Customer Care Centre
Conair Logistics
Unit 4, Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your returns number, name, and address details, together with a copy of proof of purchase and details of the fault.
Please note this Instruction Booklet is not guaranteed.
IB-18/013D
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>